vac hoses and breather pipes

[boustie]

this is my first 5 on its way back together. Really struggling to re-build to standard or working vac and breather pipes as half were never there.
Can any one help, i have gathered a few pics from the restoration boards.
This area mainly:
Also not sure were the pipe from the brake servo goes

any help greatly appreciated as always

[SCHWARTZ]

brake servo pipe goes to one of the one way valves on the back of the inlet mani.

[boustie]

I dont have any one way valves?.
I think this is going to be a nightmare !!

[Adam 005]

the one way valves are on the inlet manifold below the carb.They look kike a hose tail coming out of a nut.there should be two side by side.

[Adam 005]

heres a pic oneway valves in marked with red circle.not the best pic sorry

[boustie]

Ah me being thick.
Only problem now is working out where the rest go.
will post another pic later, thanks for replies