Results 1 to 11 of 11
  1. #1
    Non-member Rob@Backyardracing's Avatar
    Join Date
    Mar 2004
    Location
    Salford (manchester)
    Posts
    1,756
    Post Thanks / Like

    Windscreen fitting

    Ok, so ive repaired my windscreen surround on my 5 and want to re fitting my screen, idealy i could do with a new fresh screen but i just havnt got the funds and i really need to move the car fastish. So im going to fit the old screen but use a rubber seal from an old transit van (so ive been told i can do) im going to save all my OE plastic surrounds etc for when i get a new screen. Any advice on screen fitting? what bond to use? ive removed them ok before but never fitted.. any advice will be great..

  2. #2
    Non-member philg's Avatar
    Join Date
    Aug 2009
    Location
    Newcastle
    Posts
    2,211
    Post Thanks / Like

    Re: Windscreen fitting

    I will be interested in this to.

    phil

  3. #3
    Non-member tiff_lee's Avatar
    Join Date
    Sep 2008
    Location
    Glasgow/Lincs
    Posts
    1,277
    Post Thanks / Like

    Re: Windscreen fitting

    I'm just waiting on a new seal before I fit my screen but i'm going to use some Sikaflex 255 and I have a couple of suction clamps to make it a little easier putting the screen in place.

  4. #4
    Non-member J$£5GTT's Avatar
    Join Date
    Oct 2008
    Location
    THE BAT CAVE
    Posts
    3,560
    Post Thanks / Like

    Re: Windscreen fitting

    i think you will be fine in using sikaflex or stixall,stixall in name sounds a bit amateurish,but its a good adhesive,available in clear,black an white an cures to a rubber like finish.


  5. #5
    Non-member Rob@Backyardracing's Avatar
    Join Date
    Mar 2004
    Location
    Salford (manchester)
    Posts
    1,756
    Post Thanks / Like

    Re: Windscreen fitting

    What about aftermarket seals? will the ford tranny do the job?

  6. #6
    Non-member J$£5GTT's Avatar
    Join Date
    Oct 2008
    Location
    THE BAT CAVE
    Posts
    3,560
    Post Thanks / Like

    Re: Windscreen fitting

    Quote Originally Posted by Rob@Backyardracing View Post
    What about aftermarket seals? will the ford tranny do the job?

    hi rob,i had my screen done a few yrs ago,the guy used a 'universal seal',looks ok an does away with that gap at the botton to,transit seal i am not familiar with,may work tho.



  7. #7
    Non-member gimme5's Avatar
    Join Date
    Dec 2008
    Location
    north yorkshire
    Posts
    375
    Post Thanks / Like

    Re: Windscreen fitting

    not sure about transit seal,i used universal seal as mentioned above
    dont forget to spirit wipe metal down and around windscreen and apply
    windscreen primer to allow sealant to bond to surfaces,i used a windscreen sealer
    from a bodyshop to keep the rigability of the shell

  8. #8
    Non-member Schakal's Avatar
    Join Date
    Sep 2008
    Location
    Barry
    Posts
    1,357
    Post Thanks / Like

    Re: Windscreen fitting

    Quote Originally Posted by J$£5GTT View Post
    i think you will be fine in using sikaflex or stixall,stixall in name sounds a bit amateurish,but its a good adhesive,available in clear,black an white an cures to a rubber like finish.


    its made by dinitrol and comes in salami packaging

  9. #9
    Non-member tiff_lee's Avatar
    Join Date
    Sep 2008
    Location
    Glasgow/Lincs
    Posts
    1,277
    Post Thanks / Like

    Re: Windscreen fitting

    Ok where do you find this 'universal seal'?

  10. #10
    Non-member BriC's Avatar
    Join Date
    Dec 2005
    Posts
    2,386
    Post Thanks / Like

    Re: Windscreen fitting

    I fitted one using a kit off ebay - came with all the stuff to prep the panel, apply it all, etc. Didn't cost too much from memory either.

  11. #11
    Scotland Regional Rep youngscottie's Avatar
    Join Date
    Sep 2008
    Location
    stirling
    Posts
    336
    Post Thanks / Like

    Re: Windscreen fitting

    tiger seal in black
    £10 from the local factors 2 years no leaks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •