2WD Cossie Cooler Photos

[J8TRO]

Hi Guys,

Need some photos of your 2wd Cossie cooler fitments, i have moved the rad to the right to give extra room, but just want to see which way people run it round the alternator etc

Thanks

[Markey Mark (BD)]

Here's how i route intercooler pipework now mate if this gives you an alternative idea

https://www.rtoc.org/boards/album.php...pictureid=9726

Or if you want to run it near alternator this is how i run my old 5's pipework

https://www.rtoc.org/boards/album.php...pictureid=4040

[rs250nut]

Here's how i route intercooler pipework now mate if this gives you an alternative idea

https://www.rtoc.org/boards/album.php...pictureid=9726

Or if you want to run it near alternator this is how i run my old 5's pipework

https://www.rtoc.org/boards/album.php...pictureid=4040

In the first picture thats how I piped my old car up, at first I had an alloy carb top re-welded but it wore through on the strut brace, then I had it like that with a hose clamped on but it would never hold anymore than 24psi.

[Markey Mark (BD)]

I'm going to be making a clamp soon so it holds when more boost is put through it but its holding fine at 12psi at moment