maybe goin over kill here or maybe pointless or whatever but if anyone needs carb jets drilling out to very specialist sizes i have the means to do it heres an example of some i can do if you need a specfic size ask and i can see what i can do.
0.8
1.0
1.01
1.02
1.07
1.2
1.25
1.3
1.35
1.4
1.41
1.44
just if anyone felt they needed sizes possibly inbetween the conventional.
cheers
gotta love dremmle kits
1.1mm & 1.15mm ?
Originally Posted by JRP
gotta love dremmle kits
i like how people jump to conclusions i dont own a dremmel but i do work in the aerospace connector industry
will have a look now and get back to you
it was a guess... as i love mine and thats what mine gets used fori like how people jump to conclusions i dont own a dremmel but i do work in the aerospace connector industry
And it was not ment in a bad way...it was a guess... as i love mine and thats what mine gets used for
got a 1.1 mart however i would say that when drilling something out especially brass it wont pick up the whole exactly, will therefore tend to cut a little big so i would say to achieve 1.1 i would drill 1.07 and for 1.15 try 1.1 which will prob cut nearer 1.13 we have an optical projector so could measure the holes accurately when done if i did them here all depends how critical you wanna be?
ha ha no its cool i just thought i could maybe lend a service as i can cut them far more accuratley than anyone could at home (no disrespect) or if people wanted i could just supply the drills they needed if numbers werent to high.And it was not ment in a bad way...
Needs to be reasonably accurate, but then a carb isn't the most tight-tolerant of devices.
Can you supply the jets, or could you sell me a drill bit or 2?
Drill bits that small id imagine would be dear.. what price we talking at most
hmm the dill bits will be osg TiCn coated (titanium carbon nitride) so as long as you dont snap them they wont wear out ever on these jets 4 quid a drill delivered?
or you can send jets to me ready to be drilled and i'll do it for free just cover postage
cheap as chips jrp.Drill bits that small id imagine would be dear.. what price we talking at most
http://cgi.ebay.co.uk/10-x-1-1MM-HSS...item3ca29f167b
sorry ross didnt mean to piss on your fire. didnt see you was selling the bits when i posted.
Ross, could I take you up on that kind offer & pop a couple of jets in the post to you please?
I'll solder them up before-hand, so literally just needs the drill through each of them - 1 x 1.07mm & 1 x 1.1mm.
Tried them before - The tolerance is pretty dire to be honest; they're more like 1.0x mm.cheap as chips jrp.
http://cgi.ebay.co.uk/10-x-1-1MM-HSS...item3ca29f167b
sorry ross didnt mean to piss on your fire
Ile pm you drill sizes ile take a few
Good to see a handy service Ross, ive spent many hours messing with bench grinders to make my own sizes over the years, never to be spot on...
when machining into a FLAT surface the drills are toleranced to +.001 -0.00 but into solder there will be some deviation if you wanted very custom sizes i could put them onto a 4 axis cnc mill and interpolate them out to any size and could tolerance them to microns but i would have to charge for this as it would be a bit of work and ive not done that before so dont kow how well it would work but its certainely something to look at.
I use such a tool:
Do not know the name in English.
Than it is only depends on how accurate can you measure the result.
I use this one:
Brand new carb jets will be available soon in a range of sizes
Posting Permissions
Reply With Quote