I'm looking for a new actuator.
The problem is that the space it sits in is quite tight so it needs to be no more than 58mm in diameter and have a straight rod of 125mm long. Looking for about 12psi.
Currently using a t2 actuator and it doesn't hold boost properly.
Anyone have any sugestions on what to use?
Steve
If all you want is 12 psi, then i'd get another standard T2. The spare one i have will hold just over a Bar no problem so you should be able to find the same, cheap.
External Wastegate?Originally Posted by SP33DY
Does it hold that all the way to the red line?If all you want is 12 psi, then i'd get another standard T2. The spare one i have will hold just over a Bar no problem so you should be able to find the same, cheap.
As basically mines peaking at 22psi then dropping back off to 12psi, admittedly it is only a 7psi actuator coupled to a boost controller.
Ashy I'm to tight for that.
Posting Permissions
Reply With Quote