Any easy way to fit powerflex antiroll bar inner bushes? and wishbone bushes any info with any thorts are appreciated must be an easyer way some one must know
Any easy way to fit powerflex antiroll bar inner bushes? and wishbone bushes any info with any thorts are appreciated must be an easyer way some one must know
take wishbones of press old bushes out , press new bushes in , if you cnt get them out burn themthere is some info on powerflex site
For the inner roll bar, just get a big bar/screw driver and you can lever the bracket upwards enough to get a few threads on the bolt.
Simples, like compare the meerkat.
nice one dude will give it a shotOriginally Posted by gtmatt
take wishbones of press old bushes out , press new bushes in , if you cnt get them out burn them
why dint i think of that lol ahh well gunna go beat them bushes up now with my mate drivercheers
lots of grease to,as been said it tells you loads on the p'flex site.
and most important of all... make sure they are the right ones, as there are 2 sizes
There is three sizes now available for the inner anti roil bar, anyone know what the correct size is or does it depend on the age of the 5, they come in 19, 21 and 23mm sizes.
From memory, and that's as unreliable as most 5's, the 21mm is for the GTT and the 23mm came from the base models. Of course it could be the 19mm and 21 respectivaly.
The haynes book of bollox tells you.
Just compare your old ones ,they are different on cars as Renault deicded to put what ever on as I had the small type on mine and it was a phase 2 which should of had the large type
Posting Permissions
Reply With Quote