right, i know the fitment and may have found some new alloys as mike buckled one, im waiting on a email about the centre hole but ive just noticed there 6.5j thou will the 195/45/15 toyos fit ok thanx mick
right, i know the fitment and may have found some new alloys as mike buckled one, im waiting on a email about the centre hole but ive just noticed there 6.5j thou will the 195/45/15 toyos fit ok thanx mick
Centre bore for renault is 60.1mm, although can use spigot rings to ensure correct fitment. Need to be 4 x 100 PCD which is for the holes for the bolts. Any ideas on offset? can run spacers if needed
Ah ok, so .5j is the difference in width of the rim itself, 5mm?
The width is the section between the tyre mounting flanges on the wheel
http://www.rimstyle.com/pages/alloy_...explained.html
thanx sir what i mean is on the current 7j rims the tyre sit flush with the rim with 195's because these are slighty smaller i was wondering if the 195's would bulge slighty
does anyone have a 195/45 on a 6.5j rim to tell me ot have a pic??
thanx mick
195's will be fine on 6.5j
ok what about 16"s on 195/45/16 with car lowered 35mm, has anyone done this??
do they rub??
thanx mick
mick it will be fine audreys car runs 195/45r16 now and it used to run 205/40r17 but the tyres where to hard for the 5 suspension setup.