172 parts

Breaking a 172, most interior parts are gone already but still have engine & box.
Engine has had a full service just over a year ago inc. dephaser, belts & tensioners, plugs, oil, coolant, head had 16 new valved lapped in as well. Has the RS manifold fitted to it as well.
Complete with ancillaries £350, bare £325 (no manifolds or ancillaries).

Phase 2 gearbox £150

Shell is still available with wings, a tatty bonnet, doors, (dented pass door) & tailgate with no spoiler (bodykit & wishbones/subframe still fitted at present) £100

rads £50


open to offers on all part except the engine as I know this is a good one, all timed up with the propper tools etc. no tipex :cooter:

Steve,

You got the plug for the TDC sensor? i'll need some wiring attached to it too (assuming they are the same as the Phase 1 172's).

I think I have a couple of those Dave, ideally you want the gold terminal one. (Blue in colour).

Cheers Matt,

i'll grab it of you when I get the other bits.

phase 2 yeah? i'm after the boot lock motor if its in good used nick?

Just need some daft small bits missing off mine a garage lost if you can help:

Red positive battery terminal box
Air box securing bolt that goes into bracket
Bolt that holds the square plastic panel underneath inbetween engine and front bumper, not the undertray

Thanks mate

Quote:

---

Originally Posted by Matt@CodeRedMotorsports

I think I have a couple of those Dave, ideally you want the gold terminal one. (Blue in colour).

---

Get your own FS thread you poacher :cooter:

Quote:

---

Originally Posted by Mr Raider

Just need some daft small bits missing off mine a garage lost if you can help:

Red positive battery terminal box
Air box securing bolt that goes into bracket
Bolt that holds the square plastic panel underneath inbetween engine and front bumper, not the undertray

Thanks mate

---

Will have a look, think I have most of that.

Quote:

---

Originally Posted by Coops

phase 2 yeah? i'm after the boot lock motor if its in good used nick?

---

Yes phase 2, will get it off & PM you.

Sorry....:ashamed:
Just didn't want you to cut up a loom for one plug that's all.:laugh:

You got any other bits Matt :wasntme::laugh::p:D:cartman:

David..... I think you know me by now?:laugh:
Pm me what you're after, as I'm breaking the last bits off my Monaco phase 2 172.

Quote:

---

Originally Posted by Matt@CodeRedMotorsports

David..... I think you know me by now?:laugh:
Pm me what you're after, as I'm breaking the last bits off my Monaco phase 2 172.

---

Hahaha I was only kidding mate, more of a joke at 5teve L's post ;)

Quote:

---

Originally Posted by Matt@CodeRedMotorsports

Sorry....:ashamed:
Just didn't want you to cut up a loom for one plug that's all.:laugh:

---

:agree::cooter:

Quote:

---

Originally Posted by Dave Reed

You got any other bits Matt :wasntme::laugh::p:D:cartman:

---

:cooter::wasntme:

been offered one tenner delivered chap, any advance? :)

cheers

Ben

Quote:

---

Originally Posted by Coops

been offered one tenner delivered chap, any advance? :)

cheers

Ben

---

Thats what I was going to sell it for.

Thanks mate, let me know when you get chance to have a look and ill pay you :)

Quote:

---

Originally Posted by Mr Raider

Thanks mate, let me know when you get chance to have a look and ill pay you :)

---

The only bit I am unsure of is the bolt for the plastic. got the other 2 parts.

Great thanks mate.

The bit you are unsure of is a square plastic panel that comes from the bumper and has a bolt on each corner, someone lost one of mine.

How much you looking for posted Steve? :)