Re: wiring sorted, Now running problems Please HELP.
Hi,
Does any one have a wiring guide for what wires I have to connect from my Volvo engine loom to my 5 loom. I think I read some where that I have got to use 3 or is 6 wires from the red connector block but can't remember what wire is too. Any help would be appreciated as I really need to sort the wiring tonight.
My red connector block has about 10 wires as I have read there's 2 different ones some have about 5 some have about 10.
Thanks Andy.
Re: wiring sorted, Now running problems Please HELP.
Ok just found out on volvo forum that the above ecus do go together so that seems to rule that out unless one of them is no good but as it actually runs and haz says that its rare they go wrong i will try to find the fault else where.
Is there any way to check the Maf, Coolant, Tps sensors so i can eliminate them.
Im going to order some ht leads as thats the only ignition component i havent replaced as i had the coil off Dave and it was known to be good.
Whats the best way to confirm the timing correct (strobe light?)as i have replaced the belt but just fitted it exactly the same as the one that was on there so if that was a tooth out it would still be out and i never saw the engine run.
Also could anyone confirm that on the fuelling you feed to rail and return from the regulator.
Thanks andy.