-
1 Attachment(s)
My Pearly Phase 1 on the Rollers
Had my phase 1 on the rollers this morning, thought it would make around 160@flywheel but it made 198bhp with 207 torque at about 19psi at the carb top! Well happy with that :) thought it was going well!! Must be this cold weather helping
-
1 Attachment(s)
Re: My Pearly Phase 1 on the Rollers
-
1 Attachment(s)
Re: My Pearly Phase 1 on the Rollers
-
Re: My Pearly Phase 1 on the Rollers
Impressive what mods you got??
-
Re: My Pearly Phase 1 on the Rollers
Here's a list of mods
Piper 285 cam
Garrett T25 rollerbearing
2 1/2" downpipe
2 1/4" ktec exhaust
Gt tuning double cap
Fettled carb 1.3main 1mm air corrector 2nd stage drilled out to 1.2
Been getting 11.8 on the Afr at wot seems to be running sweet :burnrubber:
-
Re: My Pearly Phase 1 on the Rollers
Nice work bet she does go well :agree:
-
Re: My Pearly Phase 1 on the Rollers
-
Re: My Pearly Phase 1 on the Rollers
Quote:
Originally Posted by
Mattw
Nice work bet she does go well :agree:
Thanks, yeah she's a bit of a goer:) was interesting on the way there this morning with all the ice we've had down ere
-
Re: My Pearly Phase 1 on the Rollers
Good result mate, especially for only 19 psi!
-
Re: My Pearly Phase 1 on the Rollers
Quote:
Originally Posted by
Tutuur
Good result mate, especially for only 19 psi!
Thanks mate, yeah that's if the gauge is acurate! It flutters around quite a bit :crap: I might move it to the carb base? Should be better??
-
Re: My Pearly Phase 1 on the Rollers
Way, that's a good result. As the others have said, she must be quick :agree:
-
Re: My Pearly Phase 1 on the Rollers
you should be well pleased with that result fella. Nice looking 5 by the way😉
-
Re: My Pearly Phase 1 on the Rollers
Quote:
Originally Posted by
Trevhib
Way, that's a good result. As the others have said, she must be quick :agree:
Yes Trev quick enough for me! I don't know how you would get the power down with over 200bhp! It's all over the road as it is!! Maybe I need better tyres or better driving skills :laugh:
-
Re: My Pearly Phase 1 on the Rollers
Quote:
Originally Posted by
Nad-5GTT
you should be well pleased with that result fella. Nice looking 5 by the way😉
Cheers dude! Still a few little jobs to get done like fit a phase 1 bumper and a few tidying bits:cool:
-
Re: My Pearly Phase 1 on the Rollers
I run r888 and found I hardly get spin now just launch but add a bit of damp road holy bjesus hold on lol
-
Re: My Pearly Phase 1 on the Rollers
Quote:
Originally Posted by
Mattw
I run r888 and found I hardly get spin now just launch but add a bit of damp road holy bjesus hold on lol
Ha ha yeah when the boost kicks in and you zig zag down the road:) you gotta love em! So much fun!!:D
-
Re: My Pearly Phase 1 on the Rollers
-
Re: My Pearly Phase 1 on the Rollers
New poster! (less than 10 posts)
That's a really nice looking phase 1. It's nice to know that you can make 200hp with a side mount ic. I have a massive front mount on the car I just bought and personally don't like it. I want a nice side mount so I can fit a standard bumper on. Good work mate
-
Re: My Pearly Phase 1 on the Rollers
Quote:
Originally Posted by
beng
New poster! (less than 10 posts)
That's a really nice looking phase 1. It's nice to know that you can make 200hp with a side mount ic. I have a massive front mount on the car I just bought and personally don't like it. I want a nice side mount so I can fit a standard bumper on. Good work mate
Thanks mate! It's a Gttuning bread bin I think there probably the best standard position inter cooler you can get although I did suffer a bit of heat soak on the second dyno run! Probably get a bit more air flow on the road though as the fan at the dyno was quite small.
I think side mounts are ok for road use but if your thrashing it round the track a front mount is defiantly better! The cosie cooler behind the grille seems like a good bet!:agree:
-
Re: My Pearly Phase 1 on the Rollers
Quote:
Originally Posted by
beng
New poster! (less than 10 posts)
That's a really nice looking phase 1. It's nice to know that you can make 200hp with a side mount ic. I have a massive front mount on the car I just bought and personally don't like it. I want a nice side mount so I can fit a standard bumper on. Good work mate
There are front mounts that fit behind the standard bumper (leaving it looking OE from the outside), the best of both worlds :)
-
Re: My Pearly Phase 1 on the Rollers
New poster! (less than 10 posts)
I shall look into the cossie fmic, it sounds ideal. My huge ktec effort will be for sale shortly
-
Re: My Pearly Phase 1 on the Rollers
I think there are bigger and better ones than that too Beng. There have been loads of projects on here fitting various FMIC's behind OE bumpers. Difficult to know what to search on to find the pics/advice though.
I do remember Bood's car had a brilliant Cossie FMIC mod:
https://www.rtoc.org/boards/showthrea...t=29689&page=3
-
Re: My Pearly Phase 1 on the Rollers
I'm thinking about a front mount behind the original bumper now:) Then I can put the air filter in place of the old cooler win win :agree:
-
Re: My Pearly Phase 1 on the Rollers
Quote:
Originally Posted by
beng
New poster! (less than 10 posts)
I shall look into the cossie fmic, it sounds ideal. My huge ktec effort will be for sale shortly
I have one for sale if you're interested.
Has already had all mods required for it to bolt to a 5.
Pm me if you're interested only want £30 posted.
-
Re: My Pearly Phase 1 on the Rollers
The engine I built, and my old car. Ported head, ported inlet, 25 degree angle on valves and updated h.gasket. Helix paddle clutch also valeo green box cover. :agree:
-
Re: My Pearly Phase 1 on the Rollers
Quote:
Originally Posted by
newbstar*
The engine I built, and my old car. Ported head, ported inlet, 25 degree angle on valves and updated h.gasket. Helix paddle clutch also valeo green box cover. :agree:
Hey mate! Yep that's your old car :) different engine though!! Put a different one in after a few probs:agree: still got the paddle clutch that's excellent