Arno Samimi - Various Projects on Renault Sport Mégane RS Trophy N°0007
Project: MRS2: Water Intercooling & elec. Pop Off Steering
a small gimmick:
first system:
because the cleaning I no longer need the headlight cleaning system.
therefore I have the system used for a water cooling of the intercooler, and it's controlled depends the boost pressure.
so the water consumption is kept within limits.
second system:
electrically switch between original pop off valve and the open hks pop off.
regulatory strategy:
the hks pop-off can be operated alone, or in combination with the water cooling of the intercooler.
but in return, the water cooling not alone.
the immobilizer diode still blinks as usual. of course, also at ignition off etc.
here shown in pictures:
system off / original pop off valve active:
http://imagizer.imageshack.us/v2/640...673/Gx8t9y.jpg
http://imagizer.imageshack.us/v2/640...540/jxj2TB.jpg
hks pop-off active, original pop off valve inactive & intercooler water cooling off:
http://imagizer.imageshack.us/v2/640...540/DGizG9.jpg
http://imagizer.imageshack.us/v2/640...540/hyDrf1.jpg
intercooler water cooling on / standby & hks pop-off active, original pop off valve inactive:
http://imagizer.imageshack.us/v2/640...661/oHCVjH.jpg
http://imagizer.imageshack.us/v2/640...913/glUPKe.jpg
intercooler water cooling active & hks pop-off active, original pop off valve inactive:
http://imagizer.imageshack.us/v2/640...540/LkYByK.jpg
http://imagizer.imageshack.us/v2/640...910/4RlhZl.jpg
Re: Arno Samimi - Various Projects on Renault Sport Mégane RS Trophy N°0007
Re: Arno Samimi - Various Projects on Renault Sport Mégane RS Trophy N°0007
Project: MRS2: Conversion Alpine / Apple iPod Multimedia
needed parts:
http://imagizer.imageshack.us/v2/640...903/IhGtEq.jpg
Ipod classic 6.5g 160gb, anthracite, engraved for the provided field of application (is used only for in / the MRS2):
http://imagizer.imageshack.us/v2/640...673/nDeHaC.jpg
http://imagizer.imageshack.us/v2/640...661/PDGIOo.jpg
http://imagizer.imageshack.us/v2/640...537/CEKpir.jpg
navi antenna lengthened and soldered on mass:
http://imagizer.imageshack.us/v2/640...913/XZvqBX.jpg
also the radio antenna, and additionally split for tmc:
http://imagizer.imageshack.us/v2/640...538/oKhYhX.jpg
hidden install, and yes, reception is here:
http://imagizer.imageshack.us/v2/640...537/itcPgF.jpg
mike the freisprechanlage also elongated to mass / provided with receptacle,
and fitted into the sun visor holder, and yes, you understand me best:
http://imagizer.imageshack.us/v2/640...538/rcQjjz.jpg
http://imagizer.imageshack.us/v2/640...538/vcPHjQ.jpg
http://imagizer.imageshack.us/v2/640...540/V4t4He.jpg
display from the CRS3, otherwise it works (the original cabasse display) not with the alpine interface:
http://imagizer.imageshack.us/v2/640...907/1Hggt0.jpg
http://imagizer.imageshack.us/v2/640...661/Orwwj5.jpg
specially prepared ipod console for the center-fold:
http://imagizer.imageshack.us/v2/640...631/WBnsKp.jpg
http://imagizer.imageshack.us/v2/640...540/LIQe1r.jpg
http://imagizer.imageshack.us/v2/640...673/MV5iHX.jpg
all the required line rates elongated to mass, so that it also comes behind almost like original:
http://imagizer.imageshack.us/v2/640...538/9VbcF5.jpg
double din frame adapted / painted high gloss similar to the oem look:
http://imagizer.imageshack.us/v2/640...537/ZMk3SE.jpg
http://imagizer.imageshack.us/v2/640...673/JQ4fVj.jpg
http://imagizer.imageshack.us/v2/640...908/4Oqzuv.jpg
in it, and without bungle:
http://imagizer.imageshack.us/v2/640...540/XhCN2L.jpg
http://imagizer.imageshack.us/v2/640...905/43Fa6r.jpg
the original cabasse system completely removed, incl. the unneeded antenna cables,
and the right car boot cover exchanged with a "basic version", also a need for the following car audio installation, finish:
http://imagizer.imageshack.us/v2/640...538/CJZTsz.jpg
http://imagizer.imageshack.us/v2/640...910/fdb7T6.jpg
Re: Arno Samimi - Various Projects on Renault Sport Mégane RS Trophy N°0007
Re: Arno Samimi - Various Projects on Renault Sport Mégane RS Trophy N°0007
Re: Arno Samimi - Various Projects on Renault Sport Mégane RS Trophy N°0007
Re: Arno Samimi - Various Projects on Renault Sport Mégane RS Trophy N°0007
Re: Arno Samimi - Various Projects on Renault Sport Mégane RS Trophy N°0007
Re: Arno Samimi - Various Projects on Renault Sport Mégane RS Trophy N°0007
Project: MRS2: Full Integrated BPC2 Chip & Mapping Selecor
BPC2 Chip, program cable for the laptop, placebo-plug (if bpc2 should stay away):
http://imagizer.imageshack.us/v2/640...905/Ta77wt.jpg
BPC2 Chip engine harness:
http://imagizer.imageshack.us/v2/640...908/cLCxlG.jpg
BPC2 Chip mapping selector harness (prototyp):
http://imagizer.imageshack.us/v2/640...633/d8O3Sz.jpg
greater injectors:
http://imagizer.imageshack.us/v2/640...537/0EFHWv.jpg
headlights bright wide adjuster on the left for the BPC2 mapping program selection
(I have xenon, therefore I don't have it in as original):
http://imagizer.imageshack.us/v2/640...538/N4BqY3.jpg
not used harness and connectors in the e box in the engine compartment:
http://imagizer.imageshack.us/v2/640...540/xKrMOH.jpg
here the other ends comes out in the interior:
http://imagizer.imageshack.us/v2/640...909/ueLPuZ.jpg
http://imagizer.imageshack.us/v2/640...901/8DZyWD.jpg
made a new harness and supplemented with the com connectors of the BPC2:
http://imagizer.imageshack.us/v2/640...912/445Igb.jpg
http://imagizer.imageshack.us/v2/640...673/ykF56f.jpg
connected with original harness, where ends in the engine compartment:
http://imagizer.imageshack.us/v2/640...540/hqovQy.jpg
http://imagizer.imageshack.us/v2/640...537/ngpbvp.jpg
http://imagizer.imageshack.us/v2/640...673/T5Addo.jpg
the BPC2 Chip mapping selector harness goes also to the dashboard instruments (with not used original cables),
to show there, which mapping program is chosen (follows later):
http://imagizer.imageshack.us/v2/640...631/rjiJyz.jpg
here the used original harness to the headlights bright wide adjuster, now mapping selector:
http://imagizer.imageshack.us/v2/640...673/1JBu3M.jpg
fitted the carpet again, the two com connectors end in storage compartment in the driver foot space.
the BPC2 Chip is easy to operate now, and isn't in the engine compartment as normaly:
so easy as to dock and undock an ipod:
http://imagizer.imageshack.us/v2/640...631/QqLCs1.jpg
http://imagizer.imageshack.us/v2/640...540/IkeSf5.jpg
mounting an original Renault connector on the BPC2 harness:
http://imagizer.imageshack.us/v2/640...633/OReWzF.jpg
connected to the original harness in the e box, and the rest to the motor electronics periphery:
http://imagizer.imageshack.us/v2/640...661/Gvb4S6.jpg
http://imagizer.imageshack.us/v2/640...540/dixepV.jpg
changed the original injectors with the greater:
http://imagizer.imageshack.us/v2/640...673/adlhMl.jpg
http://imagizer.imageshack.us/v2/640...540/zILBx5.jpg
http://imagizer.imageshack.us/v2/640...673/F7CdsJ.jpg
http://imagizer.imageshack.us/v2/640...538/3mUzRw.jpg
http://imagizer.imageshack.us/v2/640...673/qHNXBv.jpg
connect the latest pins to the headlights bright wide adjuster connector and mounted the switch unit:
http://imagizer.imageshack.us/v2/640...673/3QbWMD.jpg
positon 4 I have mecanical blocked, because the BPC2 Chip has 4 program places:
0= original / 1-3= various mappings:
http://imagizer.imageshack.us/v2/640...909/N02q2g.jpg
how I incidentally change and write the plans, it looks to me like this, finish:
http://imagizer.imageshack.us/v2/640...907/83BjW8.jpg
Re: Arno Samimi - Various Projects on Renault Sport Mégane RS Trophy N°0007
Project: MRS2: Conversion CRS3 Steering Wheel
...meanwhile, there are nicer original steering wheels from renault as the mrs2 version.
thus comes the version of the clio 3 rs in my mrs2. nice grippy and shaped, and somewhat smaller.
airbag and cruise control buttons fits without problems:
http://imagizer.imageshack.us/v2/640...538/14Py2Z.jpg
shade of plastic and leather and the grain and perforation of the leather would fit well in the interior of the mrs2.
the red center mark would just go still like that. but unfortunately, the light gray stitching and silver plastic parts don't.
thus, from an initially thought "mini project in between", which can run within a day, to one, for the final result, rather more complex project.
in terms of time, until all ingredients are far, in any case...
parts concerned:
http://imagizer.imageshack.us/v2/640...633/ThMeVX.jpg
http://imagizer.imageshack.us/v2/640...907/REA9yf.jpg
http://imagizer.imageshack.us/v2/640...913/bQTOYV.jpg
http://imagizer.imageshack.us/v2/640...540/frwBYT.jpg
fair, also a new gearshift lever:
http://imagizer.imageshack.us/v2/640...537/YUqGhp.jpg
and these parts must first go to the paint shop.
the inside door handles also, because they are / were the only remaining parts in silver in the interior:
http://imagizer.imageshack.us/v2/640...661/ZqlsOc.jpg
gloss black is called for, so it fits perfectly to the interior:
http://imagizer.imageshack.us/v2/640...631/KjvlXN.jpg
http://imagizer.imageshack.us/v2/640...661/TW8to7.jpg
http://imagizer.imageshack.us/v2/640...908/orA99z.jpg
http://imagizer.imageshack.us/v2/640...661/2HSTup.jpg
http://imagizer.imageshack.us/v2/640...538/K0UoAv.jpg
and yes, instead of the originally "renault sport" now "trophy". of course in matching RAL code:
http://imagizer.imageshack.us/v2/640...912/EPeJCf.jpg
the steering wheel is back from the saddler.
middle marker in orange leather, the holes of the perforated leather not dyed in orange (too much):
http://imagizer.imageshack.us/v2/640...540/x3x41M.jpg
http://imagizer.imageshack.us/v2/640...673/hYdV8E.jpg
http://imagizer.imageshack.us/v2/640...661/m77MxD.jpg
http://imagizer.imageshack.us/v2/640...540/ubOdkq.jpg
perfectly matching orange leather pieces found, not self-evident:
http://imagizer.imageshack.us/v2/640...540/M6gr77.jpg
original parts removed:
http://imagizer.imageshack.us/v2/640...661/LFTUXZ.jpg
airbag module removed:
http://imagizer.imageshack.us/v2/640...673/IGMBXO.jpg
the connections from the buttons and the bugle unplugged and the original steering wheel removed.
the clio 3 rs steering wheel mounted (plug & play):
http://imagizer.imageshack.us/v2/640...909/4P4YSn.jpg
All connectors and pin assignments fit without modifications:
http://imagizer.imageshack.us/v2/640...673/VvBtCS.jpg
the trophy cover also attached:
http://imagizer.imageshack.us/v2/640...633/lGsKaO.jpg
airbag cables plugged in, airbag module click in:
http://imagizer.imageshack.us/v2/640...540/dqvUnv.jpg
sake of fair, in addition a new gearshift knob installed:
http://imagizer.imageshack.us/v2/640...631/9MjPmO.jpg
finished:
http://imagizer.imageshack.us/v2/640...909/HhccY8.jpg
then test drive, cruise control and bugle tested - works. airbag indicator light stays dark.
Re: Arno Samimi - Various Projects on Renault Sport Mégane RS Trophy N°0007
Project: MRS2: Conversion Optima Red Top
fits without problems:
- pole connections
- fuse box
- cable lengths
- holder thick on the ground battery / attachment
- bonnet closes
http://imagizer.imageshack.us/v2/640...537/EUkTVn.jpg
Re: Arno Samimi - Various Projects on Renault Sport Mégane RS Trophy N°0007
Re: Arno Samimi - Various Projects on Renault Sport Mégane RS Trophy N°0007
Re: Arno Samimi - Various Projects on Renault Sport Mégane RS Trophy N°0007
Great attention to detail.
Re: Arno Samimi - Various Projects on Renault Sport Mégane RS Trophy N°0007
Arno, that's how you modify a 225!:agree: Love this car.
How much boost are you running on the standard MAP sensor?
Was it hard to fit the Quaife? This is next on my list.
Re: Arno Samimi - Various Projects on Renault Sport Mégane RS Trophy N°0007
Absolutely stunning M2RS!
Re: Arno Samimi - Various Projects on Renault Sport Mégane RS Trophy N°0007
thanks @ all! ;)
Quote:
Originally Posted by
Matt Cole
Arno, that's how you modify a 225!:agree: Love this car.
How much boost are you running on the standard MAP sensor?
Was it hard to fit the Quaife? This is next on my list.
the original boost of a 225? it's 0.8 bar @ full throttle
to fit a quaife in a ndo (mrs2) or pk6 (clio v6) is easy, but into a jc5 is very troublesome.
the gear is shrunk and must be rebuilt.
in addition, the new ring gear must be backed up because it doesn't hold back with only shrink.
quaife delivers with a metal ball. the quaife differental has for this a recess.
in the crown must be milled subsequently a recess.
the ball is fitted together with shrink between the gear and quaife differential.
I have fitted a spider (not mine) with quaife:
https://www.youtube.com/watch?v=5TP0eIHPLtE
Re: Arno Samimi - Various Projects on Renault Sport Mégane RS Trophy N°0007
Absolute quality:agree:
Love reading and looking through things like this:coffee:
Re: Arno Samimi - Various Projects on Renault Sport Mégane RS Trophy N°0007
Superb read. Love how you have used the headlight adjuster to determine which map to use :agree:
Re: Arno Samimi - Various Projects on Renault Sport Mégane RS Trophy N°0007
thank you guys! ;)
yes, I love to implement practical and detail-loving "oem" solutions... :cool:
Re: Arno Samimi - Various Projects on Renault Sport Mégane RS Trophy N°0007