-
New R5 GTT 1/4m record today !
He's finally done it, Glenn HI5 with his EFI'd 1397cc C1J engine ran an 11.40 @ 124mph today at Santa pod knocking Stuart Clark off the top UK C1J spot.
He did 16 runs at full power, full throttle shifting on slicks without a single failure !
Hopefully he's got some vids of todays action, big well done mate, ready for phase 2 ? ;)
Leader board to be updated with info shortly.
-
Re: New R5 GTT 1/4m record today !
:agree: Thats some good going there, good to see it back pulling the good times now after the few mishaps thats happened recently.
Well done Glen. :)
-
Re: New R5 GTT 1/4m record today !
-
Re: New R5 GTT 1/4m record today !
-
Re: New R5 GTT 1/4m record today !
-
Re: New R5 GTT 1/4m record today !
Well done Glen :agree::agree::agree:
-
Re: New R5 GTT 1/4m record today !
-
Re: New R5 GTT 1/4m record today !
That's quick - Well done :agree:
-
Re: New R5 GTT 1/4m record today !
does any one what sort of spec he's running? and well done bud that's good going
-
Re: New R5 GTT 1/4m record today !
Top stuff :agree: Glenn well done matey :burnrubber:
-
Re: New R5 GTT 1/4m record today !
-
Re: New R5 GTT 1/4m record today !
Well done mate . She was going well when i saw you at york too:agree::agree:
-
Re: New R5 GTT 1/4m record today !
**** thats proper hauling, is this the car you mapped scoff? Is Glen spraying
-
Re: New R5 GTT 1/4m record today !
awesome car and time :D :agree:
good to see the potential of an efi'd C1J as well :smokin: :agree:
-
Re: New R5 GTT 1/4m record today !
Amazing mate! Congratulations!
I'm also very interested about the spec.
-
Re: New R5 GTT 1/4m record today !
Quote:
Originally Posted by
rs250nut
**** thats proper hauling, is this the car you mapped scoff? Is Glen spraying
guess so
https://www.rtoc.org/boards/album.php?albumid=990
-
Re: New R5 GTT 1/4m record today !
Yes lads, the spec in short (glenn can elaborate if need be):
C1J, 1397cc
Steel rods, forged pistons, steel liners, custom compression
EFI, Adaptronic management mapped by yours truely
BP285 cam, standard cylinder head, MLS gasket
GT28r core and compressor, large HKS turbine
External wastegate
Direct port Wizards of Nos nitrous, programmable controller with gear based programable injection.
Solid engine and gearbox mounts
23" M&H slicks
-
Re: New R5 GTT 1/4m record today !
Quote:
Originally Posted by
Scoff
Yes lads, the spec in short (glenn can elaborate if need be):
C1J, 1397cc
Steel rods, forged pistons, steel liners, custom compression
EFI, Adaptronic management mapped by yours truely
BP285 cam, standard cylinder head, MLS gasket
GT28r core and compressor, large HKS turbine
External wastegate
Direct port Wizards of Nos nitrous, programmable controller with gear based programable injection.
Solid engine and gearbox mounts
23" M&H slicks
:smokin:
-
Re: New R5 GTT 1/4m record today !
Great stuff Glenn and team .
That records been standing for a fair few years :cool:
-
Re: New R5 GTT 1/4m record today !
Big up the C1J massive!!! Top darts Glen!!!
Is this running a STD gearbox?
-
Re: New R5 GTT 1/4m record today !
-
Re: New R5 GTT 1/4m record today !
Very nice result, sounds like one of those very satisfying moments, great stuff well done! :agree:
-
Re: New R5 GTT 1/4m record today !
the time not the most impressive thing its good but if you had seen the stick it had 16 flat out runs and the slowest run was a 121mph and not 1 problem all day :yeah:a big thanks to the mad sceintist looks like have only 1 more person to beat now so best pull my finger out stage 2 in progress :scared: lol
ps thanks for the good comment
-
Re: New R5 GTT 1/4m record today !
it is a fantastic performance mate, anyone who knows once you crack 120mph in a c1j, finding anymore is extremely difficult, with, or without gas, as i believe stuart clarke also found out, (added gas and dont think he went any quicker?)
not too mention your short track must be spot on :)
chop chop with the incrementals.....
-
Re: New R5 GTT 1/4m record today !
fantastic work well done :agree:
any footage of the run yet
-
Re: New R5 GTT 1/4m record today !
Quote:
Originally Posted by
Rob@Backyardracing
it is a fantastic performance mate, anyone who knows once you crack 120mph in a c1j, finding anymore is extremely difficult, with, or without gas, as i believe stuart clarke also found out, (added gas and dont think he went any quicker?)
not too mention your short track must be spot on :)
chop chop with the incrementals.....
of course, that was only 112mph a couple of years back ;)
-
Re: New R5 GTT 1/4m record today !
Well done mate.. Hopefully I'll be going a little quicker soon too ;)
-
Re: New R5 GTT 1/4m record today !
Quote:
Originally Posted by
Rob@Backyardracing
it is a fantastic performance mate, anyone who knows once you crack 120mph in a c1j, finding anymore is extremely difficult, with, or without gas, as i believe stuart clarke also found out, (added gas and dont think he went any quicker?)
not too mention your short track must be spot on :)
chop chop with the incrementals.....
1.76 60ft
4.93 330
7.45 1/8
96.11 mph 1/8
9.59 1000
116.11 1000
11.40 124.42
-
Re: New R5 GTT 1/4m record today !
Is this on pump fuel too?
-
Re: New R5 GTT 1/4m record today !
Nice one Glen, thats got some legs!! :smokin:
-
Re: New R5 GTT 1/4m record today !
Awesome Glen. :agree: Its all to do with a lack of ktec bodykit!!:D
-
Re: New R5 GTT 1/4m record today !
Quote:
Originally Posted by
MATT C Ringworm Tuning
Awesome Glen. :agree: Its all to do with a lack of ktec bodykit!!:D
lol
-
Re: New R5 GTT 1/4m record today !
Quote:
Originally Posted by
rs250nut
Is this on pump fuel too?
yes 97 bp fuel
-
Re: New R5 GTT 1/4m record today !
Congratulations, great time:burnrubber:
-
Re: New R5 GTT 1/4m record today !
Well done, great result.:)
I would love to see someone else have a go with my old car.
My last run out was 29th May 2009 and best time was 11.55 but my main frustration was stringing it all together, launch, NOS, etc as my terminal speed was 127 and the 1/8 was 7.55 at 102. This varied but generally was 125 and 11.5 to 11.8. After bending 2 rods and lack of time I gave up the mantle.
This makes me want to start all over again........;)
Good luck with chasing the tens!!!
All the best
Stu :agree:
-
Re: New R5 GTT 1/4m record today !
Quote:
Originally Posted by
Stuart Clark
Well done, great result.:)
I would love to see someone else have a go with my old car.
My last run out was 29th May 2009 and best time was 11.55 but my main frustration was stringing it all together, launch, NOS, etc as my terminal speed was 127 and the 1/8 was 7.55 at 102. This varied but generally was 125 and 11.5 to 11.8. After bending 2 rods and lack of time I gave up the mantle.
This makes me want to start all over again........;)
Good luck with chasing the tens!!!
All the best
Stu :agree:
Yeah get rid of that TVR & get back into it Stu, you know it makes sence :laugh:
-
Re: New R5 GTT 1/4m record today !
was stu clarks r5 gt record with carb and without NOS?? if it is thats well impressive on a carb!! well done for the record hi5
-
Re: New R5 GTT 1/4m record today !
Well done Glen. :) :agree:
-
Re: New R5 GTT 1/4m record today !
Quote:
Originally Posted by
jonnyshaw49
was stu clarks r5 gt record with carb and without NOS?? if it is thats well impressive on a carb!! well done for the record hi5
Yes, I think Stu will always be the king of the carb-fed setup and to this day I think it's utterly astonishing what he was able to do.
I think with Glenn's motor we've found the limit of what a standard piper 285 and cylinder head can do. I saved my old C1J drag cam for a rainy day when I threw the rest of my engine away 5 years ago so that might find it's way into glenn's block along with an improved cylinder head. It would be fantastic to challange Gianni's time next year.
-
Re: New R5 GTT 1/4m record today !
I still think a nitrous motor without the turbo would work better, you could run better cams and a decent exhaust manifold without having to worry too much about reversion, intercoolers etc. Admittedly it'd be a bit pants without gas :D
-
Re: New R5 GTT 1/4m record today !
Quote:
Originally Posted by
Andrew Cooke
I still think a nitrous motor without the turbo would work better, you could run better cams and a decent exhaust manifold without having to worry too much about reversion, intercoolers etc. Admittedly it'd be a bit pants without gas :D
But that wouldn't be a GT turbo :)
-
Re: New R5 GTT 1/4m record today !
Define 'GT Turbo' ;) Nos? EFI?
Good darts though. Top stuff :agree:
-
Re: New R5 GTT 1/4m record today !
Quote:
Originally Posted by
Scoff
But that wouldn't be a GT turbo :)
how about Renault 5 GT RS?
woooot :p
-
Re: New R5 GTT 1/4m record today !
Quote:
Originally Posted by
Mart
Define 'GT Turbo' ;) Nos? EFI?
Good darts though. Top stuff :agree:
An R5 GT with a Turbo ? :D
In my mind atleast it's anyone who retains a C block and cylinder head - the heart of the original car I think. Glenn wants to stay true to the scene and keep it C1J, and hats off for that, unlike some other rougues who cheat with 16v things :innocent: :p
-
Re: New R5 GTT 1/4m record today !
-
Re: New R5 GTT 1/4m record today !
i think its astonishing what you guys scoff, glen and stu have done with the renault 5 engines, and it will be rememberd in history lol and make my restoration worth more in the future :D well done guys, and if your ever up north pop into mine and sort mine out!!
-
Re: New R5 GTT 1/4m record today !
Scoff, that drag cam of yours, how does it compare to the crazy cam that DD produced sometime back, which i think Briggsy still owns??
-
Re: New R5 GTT 1/4m record today !
Quote:
Originally Posted by
MATT C Ringworm Tuning
Scoff, that drag cam of yours, how does it compare to the crazy cam that DD produced sometime back, which i think Briggsy still owns??
I think the DD would be a bit lairy for a big-boosted or nitrous C1J. It looks to have quite a lot more overlap than mine.
-
Re: New R5 GTT 1/4m record today !
Quote:
Originally Posted by
Scoff
Yes, I think Stu will always be the king of the carb-fed setup and to this day I think it's utterly astonishing what he was able to do.
I think with Glenn's motor we've found the limit of what a standard piper 285 and cylinder head can do. I saved my old C1J drag cam for a rainy day when I threw the rest of my engine away 5 years ago so that might find it's way into glenn's block along with an improved cylinder head. It would be fantastic to challange Gianni's time next year.
is that that piece of metal you gave to me. where's that go ?lol
-
Re: New R5 GTT 1/4m record today !
Quote:
Originally Posted by
Hi 5
is that that piece of metal you gave to me. where's that go ?lol
Just Open that 710 cap on top and grind it in with a file...:D