Printable View
ok im having so many problems with my 5, i decided to make this thread so i can keep using it lol,
ok heres my new problem, i took the carb of fitted all new gaskets to it & gave it a good clean.
put it back on fired her up fine, but now the exaleration pedal is all floopy and cant rev her at all, so does anyone know where the ajustments are for the throttle cable please?
thanx;)
Whilst the carb was off, did you check the jets to see what spec the carb is, standard etc etc ???
, there is a little pinch clamp thing down near the back of the carb which pinches the outer part of the throttle cable, loosten the 10mm bolt, ajust the outer part of the cable to get it where you want it, then do the pinch bolt thing back up
Also, are you sure you have the throttle return spring connected ????
These 2 threads may help...
https://www.rtoc.org/boards/showthrea...throttle+cable
https://www.rtoc.org/boards/showthrea...throttle+cable
all i know is its a solex carb, not sure what jets are in there.Quote:
Originally Posted by Kris M
the throttle spring is definatly connected.
i didnt see a clamp i will have a good look for it tommorow
thanks for the help buddy at least it sounds like a fairly easy job ;)
thanks d4wno very helpfull link :)
Right, look where ive circled these 2 pics, thats the bit im on about. The way your throttle cable is routed / setup may be different to that in the second pic, but there afew different ways renault / people have routed the cable
https://www.rtoc.org/boards/album.php...pictureid=6632
www.rtoc.org/boards/album.php?albumid=53&pictureid=6631
:)
exellent thanks kris, sorted now ;)Quote:
Originally Posted by Kris M
chers buddy:)
sweet new turbo fitted other problems solved the cars running super sweet :)
for those of you who seen the state of the bay when i got the car less than a month ago heres some pics of it now getting there slowly;)
thanks for the help everyone :cool:
:smokin:..thats more like it luke, well youve had my turbo..why not come over on friday an collect this leather interior...........:Dohh an you owe me for that private jesus helpline you been running...;)...:agree:..:laugh:, ps ill have my wheels too....:cooter:Quote:
Originally Posted by sh5tie
I spy a hose missing off the carb
haha cool mate, was trying to ring u earlyer was gonna pop your wheels round in a bit, i fancy a nice drive gimmie a ring buddy ;)
looking good:cool:. Just a quick note, get some piping on that fuel over flow to the front of the block in the second pic:agree:
what hose is it buddy and where does it go?Quote:
Originally Posted by rs250nut
haha yea of course thats the hose i forgot to put back on ill do it now :PQuote:
Originally Posted by TrixNFlix
im going out for tea buddy , another night would be better..wife time...:laugh:, glad your getting therewith the ole girl...:DQuote:
Originally Posted by sh5tie
jesus gives out wife time? whens it my go :cooter:
:laugh:..oe parts are taken as payment..:laugh:Quote:
Originally Posted by TrixNFlix
c00l ok mate have fun ;)
let me know when were clear for the interior wanna try get it fitted on the weekend
Should of known :rolleyes:Quote:
..oe parts are taken as payment..:laugh:
I've got a lovely oe bad boy bonnet .............:cry:
hey luke , what interior has matty lined up for you?
That will only buy you foreplay...:laugh:..:wasntme:Quote:
Originally Posted by TrixNFlix
Luke, ill ring you tommorw afternoon bud to arrange somethin...:D
ok matt dont wanna rush you antime thats best for you just want it by monday morning really ;)
trix its the nice white and black leather from matts old showcar.
theys baby's:)
i also need to name my 5 any suggestions?
Quote:
Originally Posted by jesus in the seat of a 5
Is this the 2nd inline after mr m for the fritz treatment you were talking about jee!?
good lad! :laugh:
I thought so :agree: seen it in the flesh and its immaculate:)
hummm what could you call the five..........
Riley:D
hmm na i was thinking more along the lines of a females name perhaps a famous one with alot of problems.Quote:
Originally Posted by TrixNFlix
or maybee i should just call my 5........ P.M.T?
Esme or amelie??? their cool french names.
yea there nice names, that kinda reminds me of someone i used to know years ago called estee.
so im gonna name my 5 after her so ESTEE it is i, ive googled it & it says its origin is french so perfect :D
............so luke hows Estee today?:laugh:
:laugh::laugh::laugh::wasntme::laugh::laugh::laugh : as good as i remember her al them years ago :laugh::laugh::laugh::wasntme::laugh::laugh:
Ahh the memories:cooter:
its not a fuel overflow pipe;)Quote:
Originally Posted by sh5tie
its not a fuel overflow pipe;)Quote:
Originally Posted by TrixNFlix
is it not the needle valve overflow?
what pipe is it richie and where does it go m8?Quote:
Originally Posted by RICHIE
Quote:
Originally Posted by TrixNFlix
I reckon I can go for marriage :laugh:Quote:
Originally Posted by jesus in the seat of a 5
ill dive in your bed for a rummage underneath it billy boy..............:laugh:...;)Quote:
Originally Posted by The new Bill J
*Billy quickly removes his stash of new, oe parts from under his bed*Quote:
Originally Posted by jesus in the seat of a 5
:laugh:
Meaning of "Estee"Quote:
Originally Posted by sh5tie
French name http://www.meaning-of-names.com/images/spacer.gif
In French, the name Estee means- Star... Other origins for the name Estee include - French, Belgian.The name Estee is most often used as a girl name or female name.
French Meaning - Star..
Origin - French
Alternate Origins - Belgian
soo. it means your car is a star!!
c00l tx for the info there matt, just been out in her for a couple of hours shes running great, just need to sort the boost out getting a bit of lagg ;)
the pipe still goes to atmosphere. but its not a fuel over fill pipe as such its if the diaphram splits. im sure mart will be more specific about it.Quote:
Originally Posted by sh5tie
EMERGANCY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Please has anyone local to me got a spare hose that connects from the turbo to the air filter i need this before pod please help:dearme:
Either Jesus, Adey AKA Ewok or Krissy M are nearish?!
ok temporarly sorted i pinched the hose and k&n from my brothers smashed up civic (with his permision of course)
it should get me to pod, if anyone has a silacone hose for this they want to sell and can take to pod please let me know thanks luke:cooter:
need to get my carb set up propperly, im told i need a lm1?.
is this the correct name as im having trouble finding one
not sayins buy off this guy but i believe this is the kit your refering to.
http://cgi.ebay.com/ebaymotors/Innov...Q5fAccessories
ok so i tell my bro i need to get a lm1, he says he has one @ collage, and he brings this co meter home.
so while its here is it any use on the 5????????
:laugh::laugh:Quote:
Originally Posted by sh5tie
fook me!!!! i thought lm1's were bulky & hard to mount on the dash!! that fooker needs a seat!
:laugh::laugh::laugh::laugh::wasntme::laugh::laugh ::laugh::laugh:
Any wideband kit will do the job luke, they dont sell lm-1s anymore least I dont think they do.:)
Right that does it ive had it with this fecking car!!!!! everytime i sort a problem another one crops up....today the exhaust was blowing so i took it to be fixed, they did a great job its fine now, but 30mins later the mixture screw has flew out of the carb some how & now it wont idle.
so far ive bought
new ht leads
new ngk plugs
new dizzy cap & rotor arm
refurbed the carb
new ally carb head
new fmic
t25 turbo
new discs & pads
new silicone hoses
new leather interior
& so much more.
ive had it with spending money on this bloody thing that just lets me down all the time :mad::mad::mad::mad::mad::mad::mad::disagree::mad: :mad::mad::mad::mad::mad::mad:
I know EXACTLY how you feel mate! i was the same the other day! it was nearly up for sale! :laugh:Quote:
Originally Posted by sh5tie
it wont idle without a mix screw!! replace it & set the mix again,then stick it bit of silicone,paper or something in the hole to stop it coming out.
The list of stuff ain't too bad for a car knocking on 20 yr old that's probably had a few chav owners in its time. Keep at it & it will be reliable:)
A new mixture screw will only cost a matter of pence from Renault...
:)
Caaaaalllllmmmmmm down Sh1tter, everything will be alright soon enough!! ;);)
You just need to think about it a little differently that's all!
Take a look at your list and split it down into sections & it doesn't look too bad:
Service Items - Need replacing as a matter of course on any car in time!
new ht leads
new ngk plugs
new dizzy cap & rotor arm
refurbed the carb
new discs & pads
Performance Upgrades - Improve the performance of your car
new ally carb head
new fmic
t25 turbo
new silicone hoses
Styling/Tuning Upgrades - Make it more desirable
new leather interior
When you look at it like that you're improving it! ;)
Hell these cars are getting on a bit now so they need a bit of TLC now & again! Get your hands dirty mate & do the work yourself, I've done 90% of the work on my 5 & learnt so much more about it whilst I did it!
yea ill keep plodding along with her for now! but shes had her final warning, any more sh1t & ill trade her in for a jap model ffs
i seen someone selling some mixture screws a while back, cant find them now, anyone know who it was or does anyone have 1 for sale they can mail asap, i know renault will take there time.;)
Ive got a few new mixture screws here, Pm coming your way...
been having another problem, my car will idle fine stationary but when i stop at junktions it immidiatly cuts out, i turn the key it fires up and idles fine again untill the next time i stop. ive tryed ajusting the idle speed, and the mixture with no joy..
anyway i didnt want to keeep bugging you so i took the carb of to see what the problem could be, firstly i notice the float ball is split both sides of the plastic that holds it onto the bar. does anyone have a float ball for sale?.
secondly i get asked what jets i have and i dont know, is this the jet pictured here? if so all it has written on it is the number 40.
while the carb is off is there anything i need to check or adjust?
many thanx.
Sh!tter's got 99 problems & a b1tch ain't one! :pQuote:
Originally Posted by sh5tie
I had a lesson in Carbs at the weekend and have learnt more than i thought!! That picture on the left is of the Emulsion Tube, it fires a bit of fuel into the carb when you push the accelerator and the little lever on the back of the carb pushed the diaphram in. The main barrel of the emulsion tube can be CAREFULLY twisted apart (it's copper so don't go too heavy handed) and you'll basically get a little spring & ball bearing out of it, make sure that it's all clean and then back flush it with a bit of carb/brake cleaner.
The main jet is in the bottom of the bowl of the carb that is possibly full of fuel. You'll see a 12mm bolt that you need to take out that allows you to unscrew the main jet.
The standard main jet is 1.2mm in diameter & it may have 1.20 stamped on it, it not you'll need a micro drill bit to realise what size the hole is! :D
thanks steve this helps, ive got the jet out and it has 1.20 stamped on it, so thats the standard jet right?
Somebody may have drilled the main jet out so measure the hole;)
too late i put it all back together now the jet looked pritty clean & not drilled, and its running smooth cheers steve:agree:
Edit : Wow, way too slow :PQuote:
Originally Posted by sh5tie
Im in the same boat as you mate, check all my problem threads, i try not to bug folks on the boards but it just seems one problem after another :(. With regards to mixture screws, matty J has lots, ive just brought 5 of them, nothing better than a few spares :)
Grrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr:brickwall::brick wall:
been stuck underneath the car all day trying to get this fricking downpipe bolted back on still no joy.
there is hardly any room to move, trying to get the springs in place and move the bolts through the holes......is there an eaysier way to do this?:mad:
Pay someone else to do it :laugh:
wanna earn a fiver ;)Quote:
Originally Posted by phase i 16 v turbo
Quote:
Originally Posted by Shakes
if i was closer mate or you could come & get me i'd do it for ya :)
Maybe you could do it @ one of the meets.......:wasntme:Quote:
Originally Posted by Nayls
yeah ya dogger drag ur fat ass along......:cooter:Quote:
Originally Posted by jesus in the seat of a 5
ill do it :D