project slowly slowly

hello all,

this is to follow on from my thread in general chat, if you missed it, basically i was wanting opinions on whether i should scrap my 5 gt and turn my renault sport clio 172 cup into my project and only car. the consensus was to keep the 5, not surprising really :laugh:.

anyway, the next problem was this threads title, as you can tell from this photo it's been awhile since the car has been on the road :(

http://i946.photobucket.com/albums/a...y/5taxdisc.jpg

the car started off pearl white but unfortunately the paint work was beyond saving and required a full respray, i was in two minds about colour, either a modern pearl white or blue. i couldn't find a white i liked enough so decided on blue, i liked 449 but didn't want to build a replica so after going to a paint suppliers and looking through his secret book of one off colours i found the colour i wanted.
it's a blue base with multi-colour fine metal flake and purple pearl.

here is what it looked like after the first restoration

http://i946.photobucket.com/albums/a...ly/542side.jpg

http://i946.photobucket.com/albums/a...ly/425rear.jpg

http://i946.photobucket.com/albums/a...sidebyside.jpg

http://i946.photobucket.com/albums/a...y/5rearsch.jpg

http://i946.photobucket.com/albums/a...wly/5insch.jpg

http://i946.photobucket.com/albums/a...s/d71be777.jpg

anyway this is how it is today

http://i946.photobucket.com/albums/a...wly/hidin5.jpg

this was the first main point of concern, unfortunately i cut it out before a better pic

http://i946.photobucket.com/albums/a...wly/542mor.jpg

this is what i was left with

http://i946.photobucket.com/albums/a...trippedbay.jpg

http://i946.photobucket.com/albums/a...5bayrust-1.jpg

this is the surface rust below wind screen and where damage was done when windscreen changed

http://i946.photobucket.com/albums/a...creenrust1.jpg

http://i946.photobucket.com/albums/a...creenrust2.jpg

http://i946.photobucket.com/albums/a...midtopwin5.jpg

http://i946.photobucket.com/albums/a...nderscreen.jpg

now on to the sills, both are much the same but this is the drivers side

http://i946.photobucket.com/albums/a.../cillfront.jpg

http://i946.photobucket.com/albums/a...y/cillfull.jpg

http://i946.photobucket.com/albums/a...ly/topcill.jpg

there is also rust forming around the arch mounting points but this is why the rear quarters need respraying, i'd also like to make these cuts nicer by using a hole saw to tidy up the top holes

http://i946.photobucket.com/albums/a...rlighthole.jpg

here are a few from the interior

http://i946.photobucket.com/albums/a...ly/inside5.jpg

this i already have a replacement for, i think it's from when it has been pushed/pulled when moved with no engine

http://i946.photobucket.com/albums/a...erimgmount.jpg

rear quarter window nearside

http://i946.photobucket.com/albums/a...y/innsrwin.jpg

up inside under window

http://i946.photobucket.com/albums/a...y/5ininwin.jpg



so inside isn't too bad rust wise with a little surface rust here and there

ok nearly there for today

these are the easily replaceable parts and also the other bits that need attention

Both doors are in much the same condition

http://i946.photobucket.com/albums/a...y/doorcill.jpg

http://i946.photobucket.com/albums/a.../innerdoor.jpg

boot lid

http://i946.photobucket.com/albums/a...y/bootout5.jpg

http://i946.photobucket.com/albums/a...ly/bootin5.jpg

suspension

http://i946.photobucket.com/albums/a...lowly/5sus.jpg

this is the original engine that came with car, it's stripped ready for acid dip and full rebuild

http://i946.photobucket.com/albums/a...wly/5block.jpg



so that is pretty much it as it stands

sorry for the amount of pics but i believe a picture can say a thousand words.hopefully picture sizing isn't a problem but i'm not the best on the computer and it's the only way i know to do it. if there is a problem can a mod sort it out please for me please :)

also just noticed some pictures are blurry which i hadn't noticed as i'm having a few issues with my vision at the minute, i can't take any more today as i'm now not with the car

So now you can see what I'm dealing with you can see my concerns.

Now this is why it's taken so long to do anything, I like to have a plan/list to work to so everything gets done as I hate getting half way through a job and not being able to finish it. Another valid reason is I'm tight and would rather do the work myself than spend money on somehing i am perfectly capable of doing myself, but this time also ensure it is done right.

The car actually broke down the night before nat day at rockingham iirc, I worked on it most of the night to get it running but it didn't happen. The next morning I met up with the ea convoy and waved them off :cry: . A few of the lads came over the next week but still no joy, I was getting f'd off to say the least. I sent it to the garage but they couldn't find the problem and sent it back, by this time the tax had run out! TNT Hammond came across again one evening and within 15mins had it running again after talking to 'the master'. Turned out to be an intermittent faulty oneway valves, of the 4 I had only 1 worked 100% the others would do what that felt like so was impossible to set the mixture.

So now it was fixed I had no tax and the mot wasn't far way which I knew it wouldn't pass due to a few minor issues. As I had another car I decided that I'd take my time and get it 100% and how I wanted it.

The biggest annoyance was a White engine bay and blue car, so it was going to be an engine out (again) job. With the engine out I noticed that rust was beginning to make it's Mark so wiped the bodykit off to give it a good look over, wish I hadn't now :laugh: .

As you might notice I've had the car along time, 10~ years and in that time I've moved house 4 times and again next week! The last house had a large garage but I was unable to keep the car in it and before that I've never had a garage. This obviously had an impact on being able to do metal work/bodywork, six months ago I moved it to my parents new garage where it is now, so that's when work began!

The plan;

Strip it down to near enough bear shell
Cut out rest of rust, inner arch and sills
Repair inner sills and replace outers
Replace front end metal work
Remove subframe and rear beam
Send to bodyshop for spraying
Strip sub frame and rear beam
Send frame and beam to powder coating with verious other bits
Rebuild engine
Rebuild frame and beam
Rebuild car


Not alot when I put it like that :laugh:

good luck with this, it looks a long slog :)

If you would of had to pay to get the welding done then i'd of said it was a bit too much. But if your able to do it yourself then its worth doing, weldings usually pretty cheap to do it just takes alot of time and effort, atleast if your doing it yourself you know its done througoughly and isnt going to re-apear. Any welding you can get done is going to add to the value. A solid cars going to be worth alot more. Good luck and stick at it, dont be disheartened. mine was in a very similar condition, its taken me about 6 months of 1 day a weeks work, when i finished my welding then got my engine running a couple of weeks ago it made it all worthwhile, i cant wait to get back in the 5.

you have got some work ahead there :eek:but when you've done it its done ,i think any 5 gtt now days will have to go through this process sooner or later, it all depends how much u love the car, with the engine out maybe stick a 1.7 b18 or f7/f4 lump in, b18 being the cheaper and more easier to work around in the engine bay, just thinking that with the c1j getting on a bit how much longer are carb /engine bits going to be available for, and with the b18 engine bigger turbo engine/ more power less strain/ less hassle and efi already in place = more fun less expense in the long run , when parts for the c1j dry up:innocent::D

good luck with the resto and let me know if you need a hand:)

i know how you feel i was in the same situation a few years back but ended up letting the 5 go.:( biggest mistake i made so eneded up getting another as a project to do up and after 12 months got her back on the road and still love that feeling when i take it for a spin of the boost kicking in and away you go:). plus all the long days /nights (and cash) youve spent working on the car then show how worthwhile its been.

Good luck Nick.:agree:
Theres gonna be alot of highs and lows, but in the end it might just be worth it!:scared::laugh:
As Handy says, B18ft it.:cool::agree::laugh:

thanks guys, but i have to say you've not filled me full of confidence :laugh:

i've no problem doing welding myself, it's getting motivated to do it! and questioning if it's worth doing :scared: . re-shelling or buying another one is out of the question as i'll probably only end up in the same situation :(


engine is the last of my concerns at the moment, i have a fully running engine, i would just like to put a nice fresh one in. If i do go down the conversion route it will be f4rt as done by andyrg as even if it doesn't go in the 5 it can go in the clio :devil:

another plan, which is probably gonna be what happens is to strip and sell bit's i have no need for at the minute, basically so i'm left with the rolling shell, get it sound then buy the bit's as and when i need them.

If there is anything that anybody is interested in let me know :) (pm preferably)

First post!

hi would you be able to tell me where you got your back lights from and your single front wiper as i think they look mint

Quote:

---

Originally Posted by john.r5

First post!

hi would you be able to tell me where you got your back lights from and your single front wiper as i think they look mint

---

hi john, welcome to the club

the single wiper was off ebay, i'm not sure who made it, it isnt a storm kit but i think they now do something similar which may be your only option.

the rear lights are a kind of one off, they're based on the prima afterburners which are a mission to get hold of in themselves, the actual lights are hella led rings but they're were something like £40 each :eek:, they cost me the best part of £500, oh to be young again!

was gonna do some more stripping down today but due to being in a bad mood decided it would be best not too as i'd probably go mad and start swinging a hammer at it causing more problems in the long run.

also i have a lack of storage space, i currently have stuff stored in the mother in-laws shed, tnt hammonds shed and stuff at my parents! got a couple of weeks off work so will sort through it all, chuck what's no good and what's not needed. anything that is sell-able i'll stick a thread up in the classifieds

There is a lot of work, but like your title says.. slowly slowly, it'll be worth it when it's done.. I like to say it's more about the journey :agree:

Do you think you'll keep the blue or go back to a stock colour?

i think you're right andrew, it's the journey that counts :agree:

i'm not sure to be honest, was thinking about going back to the stock pearl white, although it's a lovely colour when fresh i just think with modern paint technology it could be so much better. i do really like the blue it is at the minute, i had it out in the sunlight and it's got to be seen in the flesh to be appricated but i might go with the albi blue from the 197s or see what else catches my eye. i really don't kno as i had thought about going grey also but i think i've got a little time to think about it and still not have decided yet :laugh:

Yo Tricky, nice to see you last night, thanks for your help with mine (almost there now) you are pretty much in the same position I was 3 years :( ago and I have about 2 hours a week in which I can work on Fluffy. But I have to say, I have a lovely feeling that I now own a 5 that is solid. It is worth doing and you will have a very rare car which surprises many. I love the look on peoples faces when they see one that have no idea what they are. You will be surprised how quickly the rust disapeers and the new stuff goes in. I hope you won't be as long as me, but that time has passed quickly for me and I'm almost there, and once I am - TNT will be round yours.

Keep the C1j unless you have a specific reason for doing the conversions, I can understand why people do F4RT and B18 FT conversions, but the C1j is still a fine power plant for a quick blast. If I intended doing a couple of Nurburg's a year I'd possibly do the conversion, but for 1 or 2 non cometative track days and the odd Sunday morning blast, the C1J is perfect. Shame on you Handy turning your back on the C1J;)

We'll be in touch

interesting project this one, will be watching how you tackle areas of rust :) :cool:

Quote:

---

Originally Posted by TNT Tricky Nicky

i had it out in the sunlight and it's got to be seen in the flesh to be appricated but i might go with the albi blue from the 197s or see what else catches my eye.

---

I like this blue I bet it would look quite nice on a 5 - I just like base colours (they tend to be easier to touch up with a can when my angle grinder slips :D

cue someone to correct me this is a pearl or something :)

http://t2.gstatic.com/images?q=tbn:X...-f3q-s.jpg&t=1

Quote:

---

Originally Posted by djinuk

interesting project this one, will be watching how you tackle areas of rust :) :cool:

---

I was thinking flame thrower! :laugh:

I'll try not to keep you waiting too long! Will be seeking advise on the best way to go about it but I've Got a rough idea how I'll be tackling it.

Racing blue is nice and I have considered it but Handys is now a similar colour but I guess whatever I choose someone will have done it :sad2: :laugh:

[QUOTE=Keep the C1j unless you have a specific reason for doing the conversions, I can understand why people do F4RT and B18 FT conversions, but the C1j is still a fine power plant for a quick blast. If I intended doing a couple of Nurburg's a year I'd possibly do the conversion, but for 1 or 2 non cometative track days and the odd Sunday morning blast, the C1J is perfect. Shame on you Handy turning your back on the C1J;)

We'll be in touch[/QUOTE]

f7p power for the win :innocent::innocent::popcorn::popcorn:

Quote:

---

Originally Posted by TNT Tricky Nicky

I was thinking flame thrower! :laugh:

I'll try not to keep you waiting too long! Will be seeking advise on the best way to go about it but I've Got a rough idea how I'll be tackling it.

Racing blue is nice and I have considered it but Handys is now a similar colour but I guess whatever I choose someone will have done it :sad2: :laugh:

---

an angle grinder, mig welder and some fresh metal worked a treat on mine :D

Quote:

---

Originally Posted by HAndy

f7p power for the win :innocent::innocent::popcorn::popcorn:

---

Only if you actually put it on the track / strip or attend those meetings.

oooooooooohhhhhh that's gotta hurt :cooter:

Back to the thread

Tricky do you need a hand tonight?

TNT?

Quote:

---

Originally Posted by TNT ANDY

Tricky do you need a hand tonight?

TNT?

---

not sure buddy, it's all gone house this house that at the minute, poor old 5 will have to wait for a bit now.

i do need an electrician though :laugh:

not much of an update really.

just sorn'd it for another year, hopefully for the last time but i'm not gonna count any chickens just yet.

also got a pair of inner sill repair panels off ashy, already have the outers. didn't want to cut the outers off and find the inners are fecked and not be able to do anything about it, thought it would be best to be prepared for the worst.

Coolio, glad you've got bits to sort sills, once they're fitted least you'll know them bits are all good :)

Quote:

---

Originally Posted by TNT Tricky Nicky

not much of an update really.

just sorn'd it for another year, hopefully for the last time but i'm not gonna count any chickens just yet.

also got a pair of inner sill repair panels off ashy, already have the outers. didn't want to cut the outers off and find the inners are fecked and not be able to do anything about it, thought it would be best to be prepared for the worst.

---

stick with it m8 i have owned mine 3 years and only had about a years driving out of it:eek: will be worth it in the end keep the dream alive:)

Quote:

---

Originally Posted by wizza73

stick with it m8 i have owned mine 3 years and only had about a years driving out of it:eek: will be worth it in the end keep the dream alive:)

---

I used it for over 5/6 years as a daily driver so I've done fairly well with it :laugh: , used to fix it and keep on top of problems as soon as they happened or if it looked like it may have a problem. It became a second car and I lost interest when I couldn't get it running right and I had another car so couldn't be bothered with it :(.

Now I have another house, getting married and working full time so it's taken a back seat as it's hard to find time, money and most importantly motivation!

I have big plans and I won't let the car go until they're done and I'm happy with it, even then I doubt it'll go far!

Good luck with yours, they are worth the grief :laugh:

If you fancy a hand one Wednesday let me know as im still looking for a new job ;)

Quote:

---

Originally Posted by Mr Raider

If you fancy a hand one Wednesday let me know as im still looking for a new job ;)

---

Good stuff, want to pop the windscreen out and need a pair of hands to catch it :agree:

Not so good about the job but I'm sure you'll find one

Ok no worries, drop me text when you want a hand, am about tomorrow during day.

Yeah, gonna keep trying, need job soon as cant handle anymore Jeremy Kyle... lol :rolleyes:

So I took the windscreen out this afternoon, wasn't sure if I would get the time so didn't get mr raider round to help, spent an hour with a Stanley knife cutting it out as it's gonna be the only original glass to go back in, well that was the plan :(

So had it all free, so I thought, lifted it out about 2" and crunch, a crack appeared in-between the inner and outer glass, the bottom left corner was attached enough to create enough pressure to cause a stress fracture.

Any way the good news is it's all solid, the bubbling around the screen was between the original and new paint and no sign of rust at all. The rust spots along the top edge are gonna be a simple fix also.

Now with the knowledge it's good around the screen I'll set about repairing the sills and replacing the front end :)

good to see your going to keep on with it fella. hope you dont get to the stage im at though and stop like ive done lol. all mine needs is the full respray to finish but i just cant justifiy it on a 24yr old car :(

Quote:

---

Originally Posted by jimmy_b

good to see your going to keep on with it fella. hope you dont get to the stage im at though and stop like ive done lol. all mine needs is the full respray to finish but i just cant justifiy it on a 24yr old car :(

---

You could always pay for a substandard paint job like I did! Even newly applied poo paint looks better than old crusty stuff.


Sometimes:crap:

Quote:

---

Originally Posted by TNT Tricky Nicky

So I took the windscreen out this afternoon, wasn't sure if I would get the time so didn't get mr raider round to help, spent an hour with a Stanley knife cutting it out as it's gonna be the only original glass to go back in, well that was the plan :(

So had it all free, so I thought, lifted it out about 2" and crunch, a crack appeared in-between the inner and outer glass, the bottom left corner was attached enough to create enough pressure to cause a stress fracture.

Any way the good news is it's all solid, the bubbling around the screen was between the original and new paint and no sign of rust at all. The rust spots along the top edge are gonna be a simple fix also.

Now with the knowledge it's good around the screen I'll set about repairing the sills and replacing the front end :)

---

Lucky b'stid - Although mine is now all good and repaired, I have yet to put this on the road. I am assure by the short one, that the question of if it will pop out or crack is wholey errelevent, more a question of when:cry::cry::cry:

James when you start questioning and trying to justify spending money you'll never do anything whether it be on the car or a holiday. You'll regret not doing it more than doing it, find a bodyshop that doesn't mind you stripping, prepping and refitting the car, that way you'll save a bit of cash.

Andy, it'll be fine :agree: if not I was thinking carbon fibre screen surround and roof skin :smokin:

Quote:

---

Originally Posted by TNT Tricky Nicky

James when you start questioning and trying to justify spending money you'll never do anything whether it be on the car or a holiday. You'll regret not doing it more than doing it, find a bodyshop that doesn't mind you stripping, prepping and refitting the car, that way you'll save a bit of cash.

Andy, it'll be fine :agree: if not I was thinking carbon fibre screen surround and roof skin :smokin:

---

im up for strippin and preping but they've gotta refit everythin cause my rear archs and skirts fit for **** lol

carbon roof and surround sounds a plan! bonnet and tailgate to............ mayb wings, bumeprs skirts etc etc lol

so in the spirit of the project, not a lot has happened since the last update :ashamed:

still no major updates yet as the bad weather, house move, Xmas, new year, work and lack of motivation have gotten in the way.

the plan at the minute is to strip it near enough to a bare shell, as the doors and boot are scrap anyway they'll come off to help reduce the weight, as well as sub frame and rear beam which will be given a little bit of tlc, then somehow get it as high as possible to work on the sills.

hoping to get started again Thursday evening and maybe get a couple of members over for motivation and a catch up :)

PM me your new post code dude. I'm there.:cool:

How have I missed this thread?

Anyway good to see another member bringing a 5 back from the brink of scrapping, as Andy said the TNT boys are there to help as are rest of the Norfolk decision, gimme a shout if ya need a hand

Quote:

---

Originally Posted by Os8472

How have I missed this thread?

---

i try not to bring too much attention to my lack of progress :laugh:

thanks for the offer oli, I'll bear it in mind for when i start throwing it back together so keep your 2016 diary free :laugh: :sad2:

Quote:

---

Originally Posted by TNT Tricky Nicky

i try not to bring too much attention to my lack of progress :laugh:

thanks for the offer oli, I'll bear it in mind for when i start throwing it back together so keep your 2016 diary free :laugh: :sad2:

---

Lol, will do

Am not far away if you need hand too fella, need to hook up with TNT crew again very soon, word out :D

To say your working area is small would be an understatement. TO say lighting is poor, would also be an understatement.

Keep going with this Tricky, the results are w:cool:ll wor
th it.

well a little bit of progress was made thursday night, tnt andy and mr raider came over for a catch up and to try and get things moving again, tnt hammond couldn't make it over, he mumbled something about going to see a Thai ladyboy for a massage or something :rolleyes:


was good to catch up but felt a little bad though as it was time that could have been spent on their own cars.

not a lot happened work wise as my garage area was a complete mess with crap everywhere and poor lighting which i still need to address as andy has pointed out!

got the front windows out which was a nightmare as in my haste i hadn't dropped the windows down to access the retaining screws so a lot of time was wasted, after a bit of head scratching and failed attempts we got them out by removing the regulators and manually pushing the window down.

the remaining bits of body kit came off revealing a little more rot around the rear bumper mounts that needs attention, nothing serious and easily repairable :)

It'll get there dude, just keep chipping away at it and all will get sorted :)

Quote:

---

Originally Posted by Mr Raider

It'll get there dude, just keep chipping away at it and all will get sorted :)

---

keep at it ;)will be worth the effort :agree:
let me know if you want a extra pair of hands etc :cooter:

might need to pm me your post code etc as its been a while ,and youve moved house :laugh:

Not far from Domino's Colman Road Norwich... ;)

i managed to do a little today, hopefully sold the seats to free up some room and money, so took them out and gave them a clean. also removed the fuel flap as tnt andy needs one, i've got a bond in aero style filler cap to fit so was a small step forward.

i had a bit of a :scratch: to work out the best way to remove the flap, couldn't get anything in the arch to cut the nuts off, ended up centre punching the head of the bolt and drilling the heads off using a small pilot hole followed by a 7mm drill bit.

felt motivated and wanted to do more but got stressed with the lack of space and crap everywhere so packed up again :(
really need to set a day aside to sort through everything and move bits to my house to store, then hopefully i'll actually be able to turn around without catching myself on something.

Niceone dude, soon as ya get bit of space, - must be grinder and welder time! :)

Quote:

---

Originally Posted by TNT Tricky Nicky

i managed to do a little today, hopefully sold the seats to free up some room and money, so took them out and gave them a clean. also removed the fuel flap as tnt andy needs one, i've got a bond in aero style filler cap to fit so was a small step forward.

i had a bit of a :scratch: to work out the best way to remove the flap, couldn't get anything in the arch to cut the nuts off, ended up centre punching the head of the bolt and drilling the heads off using a small pilot hole followed by a 7mm drill bit.

felt motivated and wanted to do more but got stressed with the lack of space and crap everywhere so packed up again :(
really need to set a day aside to sort through everything and move bits to my house to store, then hopefully i'll actually be able to turn around without catching myself on something.

---

Nice one Tricky - The nights will be getting lighter soon, so that will help also.

Thanks for taking the time to remove the filler flap - It'll be nice to have a bit of Bluey on Fluffy action.

Getting a clear work area is going to be Tricky (hahahhaaaaa) but once you've a clear area, you'l see it flows a bit better. Keep at it, I'll have abit more time on my hands within a month, I'll be able to get really stuck in with you.

Good to see a lot more going on over here in the east.
:cooter:

Don't get too excited guys, a small update on progress :laugh:

Quote:

---

Originally Posted by TNT Tricky Nicky

felt motivated and wanted to do more but got stressed with the lack of space and crap everywhere so packed up again :(
really need to set a day aside to sort through everything and move bits to my house to store, then hopefully i'll actually be able to turn around without catching myself on something.

---

So just over six months later I got round to finally doing this yesterday. Cleared out my shed, boxed up a few bits which aren't needed and stuck them in there. Made myself a little bit of room and stripped the front brakes and suspension off. Was hoping to get the hubs off to break down and refurb but couldn't split the ball joint, not sure if it's easier to do it on the car or take the joint off the wishbone and do it on a bench? :confused:

Like I said nothing ground breaking as lack of money is seriously affecting the plans so just doing things that don't involve spending money

Quote:

---

Originally Posted by TNT Tricky Nicky

Don't get too excited guys, a small update on progress :laugh:





So just over six months later I got round to finally doing this yesterday. Cleared out my shed, boxed up a few bits which aren't needed and stuck them in there. Made myself a little bit of room and stripped the front brakes and suspension off. Was hoping to get the hubs off to break down and refurb but couldn't split the ball joint, not sure if it's easier to do it on the car or take the joint off the wishbone and do it on a bench? :confused:

Like I said nothing ground breaking as lack of money is seriously affecting the plans so just doing things that don't involve spending money

---

Dude - Ross has an entire front end to stitch on, I have a welder, No cash needed. Get it on. Both mine and Ross's are now almost fully done, say the word chap and we'll TNT it.

Quote:

---

Originally Posted by TNT ANDY

Dude - Ross has an entire front end to stitch on, I have a welder, No cash needed. Get it on. Both mine and Ross's are now almost fully done, say the word chap and we'll TNT it.

---

That's the plan mate :), making room to actually get in and to get the front end on, will probably do o/s sill and rear bumper plate then get Houdini in to throw a sheet over it and say the magic words so that when the sheet comes off it will be the other way round to do n/s sill and rear bumper mount :laugh:

so another year past, renewed my membership

also meant i had to declear the 5 sorn again :cry:

borrowed a ball joint seperator from tnt hammond to get my hubs off, had a quick go at it last week but had an epic fail as was rushing it. went back to it last night and got them off. My dad came in as he couldn't hear any banging, crashing or power tools to check i was ok :laugh:, looked at me a bit like this :scratch: and said "there's not much left of it now" and left me to it.

now at the point i'll start to rebuild it but i've been thinking about getting the shell acid dipped and e coated to make sure it's 100% rust free and lasts longer as i don't want to have to do this again but not sure if it's worth it? i have heard differing opinions on it :confused:

Yey - Tricky's getting moving on it!

World class my man, world class - is TNT happening tomorrow night for a bit of help your way? Anything I can do to help???

Glad ya renewed fella, seen programme on acid dipping literally anything which aint solid metal falls off! not sure how much it is, can create more work although at least you know its a solid base to move forward with. Have to catch up for TNT time soon, been ages! :ashamed:

thanks for the offer andy but i think my next step will be to take apart the other front end, repair and prep that for fitting. Got to get a new spot weld drill bit 1st and do it at ross's so better wait for him to get home ha ha

hi karl, yes been awhile but that's kinda my fault as well :ashamed: be good to catch up

I've looked into it before as i stumbled across a place that does it when i was looking for someone to dip my engine block. from memory it's around £800 for both processes so it's not cheap, you can then have it back do any welding/repairs and then have it re dipped ready for filling/spraying so totals £1600. i wouldn't send it back though, just do the repairs and send it straight to the bodyshop.

9 months without any updates, doesn't seem like that long ago. Things are happening and the project still on going, as the title says slowly slowly.

Mainly been collecting parts and formulating a plan, problem is the plan keeps changing.

Hopefully the next update will be more exciting :coffee:

Glad to hear it mate, takes while to source some parts now as they are getting abit scarce thesedays :)

sorn'd again

That is all. :boring:

you wer'nt kidding when you said slowly slowly:laugh::laugh::laugh:

Lol, although your collection of parts/panels is nearly there?! ;)

Time flies when you're having fun. November saw the birth of my 1st child, this in turn emptied my bank account and I very rarely have any spare time. Today I actually had some time to myself as he went to nursery due to it being shut on his normal day. I had a few jobs around the house, once completed I ventured into the garage. Mainly sorted out some surface rust & following on from this https://www.rtoc.org/boards/showthread.php?t=33364 this happened http://i946.photobucket.com/albums/a...psbd116c70.jpg

Wasn't planning on it and as such forgot to get a before photo

So by my maths I've got another 6 months before I actually do anymore on the 5 :laugh:

Hmmm - nice n speedy - have you got the horn again???

Not having a car is quite motivational :laugh: although cycling in the sunshine is also a nice change :scratch:

lol chassis number? could post a letter through there! :wasntme:

Not anymore lol. As I said, was too thin to re stamp once I'd taken the rust back. Thought the best bet was to get the whole lot stamped into a fresh bit of tin and weld it back in ringer style. Just got to find a company to do it for me, will take log book with me so I don't get the wrong numbers :laugh:

This will be my last post on here for awhile, my membership expires tomorrow & with birthdays & Xmas on the horizon I really have no money to renew :( if I can get a lift I will come to the snetterton meet & I'll be at the curry house :)

As for the car, it has been sorn'd again, it has also found its way to a new home, I now have plenty of room to work on all sides, organise my parts and get the show back on the road so to speak.

Hopefully this guy :santa: will renew my membership for me and I'll hopefully have some more progress to report, or in the spirit of the project, maybe not :boring::denied::sleep:

Will also see if I can get the tnt crew back together for one last job, rumour has it, andy is considering going mad again :pirate: tnt Hammond is selling ol' red :cry: and as for mr raider well, he is just expanding his fleet and will soon be lost in a pile of old renaults :laugh:

All the best guys

Nick

Quote:

---

Originally Posted by TNT Tricky Nicky

This will be my last post on here for awhile, my membership expires tomorrow & with birthdays & Xmas on the horizon I really have no money to renew :( if I can get a lift I will come to the snetterton meet & I'll be at the curry house :)

As for the car, it has been sorn'd again, it has also found its way to a new home, I now have plenty of room to work on all sides, organise my parts and get the show back on the road so to speak.

Hopefully this guy :santa: will renew my membership for me and I'll hopefully have some more progress to report, or in the spirit of the project, maybe not :boring::denied::sleep:

Will also see if I can get the tnt crew back together for one last job, rumour has it, andy is considering going mad again :pirate: tnt Hammond is selling ol' red :cry: and as for mr raider well, he is just expanding his fleet and will soon be lost in a pile of old renaults :laugh:

All the best guys

Nick

---

Lol cant afford any more old renaults, - fleet of 3 is more than enough & a fair few spares! :wasntme: Probably be able to pick you up for Snetty, i may have lil'un with me as mrs at work, looking forward to more pics of project slowly slowly ;)