Flocking Service

We have just set up a workshop for electrostatic flocking of dashboards, centre consoles or practicaly any other part that you want to have done.
we have a full professional electrostatic setup with an epoxy spray booth to give a top quality finish to the parts.
if any forum members want any of their parts done at a good rate please get in touch and i will make sure you get a very good price.
virtualy all colours are possible and its a great way to make tired looking plastic parts look like new.

some examples of parts we have done

http://www.phoenix-autosport.co.uk/p..._trim_blue.jpg
http://www.phoenix-autosport.co.uk/p...andles_red.jpg
http://www.phoenix-autosport.co.uk/p...nacle_blue.jpg
http://www.phoenix-autosport.co.uk/p...nsole_blue.jpg

will add more examples of different parts and colors as we get more work through

looks fantastic! good job :)

looks floching awesome :p

Price on a complete 5 dash with postage?

Quote:

---

Originally Posted by elcie

Price on a complete 5 dash with postage?

---

Same here please i have a dash ready to be flocked.

a 5 dashboard with cubby hole flap and the instrument visor provided its supplied to us fully stripped would be £99 packaging and postage back within the uk mainland by parcelforce would be £20

I'll need the top of a clio dash doing at some point. :agree:

Phone number and area your based in please!

https://www.rtoc.org/boards/showthrea...374#post238374 :dearme:

So thats £120 plus me posting it to you. :scratch: its only a small dash :sad2:

Quote:

---

Originally Posted by elcie

So thats £120 plus me posting it to you. :scratch: its only a small dash :sad2:

---

£99 for a small dashboard plus 2 additional small components is quite a competative price, we are happy for people to bring parts to us and collect parts from us to save on packaging and carriage costs, unfortunately bulky items like dashboards are not cheap to ship these days

Quote:

---

Originally Posted by MATT C Ringworm Tuning

I'll need the top of a clio dash doing at some point. :agree:

---

no problem, im not familiar with the clio but if you send me a pic of the part you want done i will do you a quote

Quote:

---

Originally Posted by newbstar*

Phone number and area your based in please!

---

im in cambridgeshire PE28 0JQ and you can contact me on 07774 838467

a few more images of our recent work.

http://www.phoenix-autosport.co.uk/p..._set_black.jpg
http://www.phoenix-autosport.co.uk/p...lose_black.jpg
http://www.phoenix-autosport.co.uk/p..._set_1_red.jpg
http://www.phoenix-autosport.co.uk/i...ar_trims_1.jpg
http://www.phoenix-autosport.co.uk/i...ar_trims_2.jpg
http://www.phoenix-autosport.co.uk/i...ar_trims_3.jpg
http://www.phoenix-autosport.co.uk/i...rims_red_1.jpg

a few more pics of our work, done some seat arosa door cards for a customer in slate grey
http://a2.sphotos.ak.fbcdn.net/hphot...11602289_n.jpg
http://a1.sphotos.ak.fbcdn.net/hphot...90571911_n.jpg
http://a7.sphotos.ak.fbcdn.net/hphot...02344706_n.jpg
and a corsa centre console and side vents
http://a3.sphotos.ak.fbcdn.net/hphot...02780631_n.jpg
http://a5.sphotos.ak.fbcdn.net/hphot...49653405_n.jpg

join us on facebook to keep up to date with our work and offers
http://www.facebook.com/pages/Phoeni...65290366851300

http://www.facebook.com/pages/Phoeni...65290366851300
our latest work, a pug 205 mi16 dash and centre console
http://www.phoenix-autosport.co.uk/p...full_black.jpg
http://www.phoenix-autosport.co.uk/p...lose_black.jpghttp://www.phoenix-autosport.co.uk/p...full_black.jpg
http://www.phoenix-autosport.co.uk/p...lose_black.jpg
http://www.phoenix-autosport.co.uk/p...sole_black.jpg
http://www.facebook.com/pages/Phoeni...65290366851300
http://www.phoenix-autosport.co.uk/p...sole_black.jpg

http://www.facebook.com/pages/Phoeni...65290366851300

a full dashboard set for a corsa b done last week
http://a2.sphotos.ak.fbcdn.net/hphot...67176849_n.jpg
http://a8.sphotos.ak.fbcdn.net/hphot...96821360_n.jpg
http://a5.sphotos.ak.fbcdn.net/hphot...39264033_n.jpg
http://a3.sphotos.ak.fbcdn.net/hphot...73500747_n.jpg
http://a1.sphotos.ak.fbcdn.net/hphot...12717182_n.jpg
as always lots more images of our work on our facebook page, click the like button to be kept up to date with all our work.

http://www.facebook.com/pages/Phoeni...65290366851300

http://www.facebook.com/pages/Phoeni...65290366851300

we can now offer a refurbishment service for door cards and rear quarter cards, flocking shown is color matched to the original fabric trim for as close to OEM look as possible, repairs to damaged cards can also be done.
provided parts are supplied stripped of fabric or vinyl the cost for preparing and flocking a set of front cards would be £100 or a set of front and rear cards £150

Repair prices,
laminate with fibreglass tissue and refinish cracks £4 each
repair collapsed bolster by bonding in a plate and refinishing surface £20

uk shipping normaly £20 but to kickstart things it will be free on card sets recieved before the end of febuary ;)

http://a5.sphotos.ak.fbcdn.net/hphot...37319283_n.jpg

http://a3.sphotos.ak.fbcdn.net/hphot...90354107_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphot...64603731_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphot...29606058_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...44590142_n.jpg

http://a7.sphotos.ak.fbcdn.net/hphot...62185017_n.jpg

http://a3.sphotos.ak.fbcdn.net/hphot...81756370_n.jpg

:smokin:
http://www.facebook.com/pages/Phoeni...65290366851300

Hi mate :)

My dash & console are all packed and will be sent on monday or tuesday :)

Gibbo

Quote:

---

Originally Posted by Gibbo69

Hi mate :)

My dash & console are all packed and will be sent on monday or tuesday :)

Gibbo

---

no worries, will get them turned round as quick as possible for you.
which color did you want them done in ?

Black pesase :)

no problem, black it is ;)

Door cards looks excellent. :agree:

our latest work, a fiesta mk2 dashboard and centre console


http://www.facebook.com/pages/Phoeni...65290366851300
http://www.phoenix-autosport.co.uk/p...ard_full_1.jpg
http://www.phoenix-autosport.co.uk/p...ard_full_2.jpg
http://www.phoenix-autosport.co.uk/p...vebox_open.jpg
http://www.phoenix-autosport.co.uk/p...enger_side.jpg
http://www.phoenix-autosport.co.uk/p...d_top_vent.jpg
http://www.phoenix-autosport.co.uk/p...nsole_full.jpg
http://www.phoenix-autosport.co.uk/p...sole_close.jpg


http://www.facebook.com/pages/Phoeni...65290366851300

http://www.facebook.com/pages/Phoeni...65290366851300
small job we had in this week a center set of dash trims for a corsa c in a combination of black and flannel grey flock
http://a5.sphotos.ak.fbcdn.net/hphot...87125100_n.jpg

http://www.facebook.com/pages/Phoeni...65290366851300

http://www.facebook.com/pages/Phoeni...65290366851300

some more of our latest work a set of corsa b door and rear quarter cards in black flock

http://a5.sphotos.ak.fbcdn.net/hphot...28007970_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot...88859262_n.jpg


http://a2.sphotos.ak.fbcdn.net/hphot...13134482_n.jpg

http://www.facebook.com/pages/Phoeni...65290366851300

http://www.facebook.com/pages/Phoeni...65290366851300

some more of our latest work a set of corsa b interior light, grab handle and sunglasses holder completely stripped, refinished in black flock and fixings painted where required

http://a6.sphotos.ak.fbcdn.net/hphot...24597962_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot...16427607_n.jpg

http://a3.sphotos.ak.fbcdn.net/hphot...60575620_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphot...64002549_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphot...14439732_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphot...58012053_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot...35620653_n.jpg

http://www.facebook.com/pages/Phoeni...65290366851300

http://www.facebook.com/phoenixautosport

Recieved a dash off of a fiesta mk1 for flocking, like many out there it has its issues in the way of damage so i decided to show some of the repair work as it comes together.
im doing this dash as a demonstration of what can be done, please be aware that to do this is normaly chargable as it is very time consuming.

first area of damage a split to the upper left side of the instrument binacle
http://a1.sphotos.ak.fbcdn.net/hphot...00462881_n.jpg

split repaired with cyanoacryalate resin
http://a7.sphotos.ak.fbcdn.net/hphot...12939198_n.jpg

after filling with resin and refinishing
http://a6.sphotos.ak.fbcdn.net/hphot...42542802_n.jpg

below that a few more nicks and splits repaired the same way
http://a4.sphotos.ak.fbcdn.net/hphot...57835543_n.jpg

dint in the right hand side of the instrument binacle
http://a2.sphotos.ak.fbcdn.net/hphot...28193571_n.jpg

filled and refinished
http://a5.sphotos.ak.fbcdn.net/hphot...57043572_n.jpg

drivers side lower corner of dash was crumbling and falling apart
http://a6.sphotos.ak.fbcdn.net/hphot...26856623_n.jpg

soaked with resin and clamped in place to cure restoring it to shape and making it rigid again
http://a8.sphotos.ak.fbcdn.net/hphot...66724614_n.jpg

drivers side of dash near fixing again crumbling away
http://a3.sphotos.ak.fbcdn.net/hphot...40784070_n.jpg

same process used to restore shape and strength
http://a4.sphotos.ak.fbcdn.net/hphot...26379565_n.jpg

next up the drivers top corner of the dash had the same issues
http://a5.sphotos.ak.fbcdn.net/hphot...93613347_n.jpg

again soaked in resin and clamped to restore its shape and strength
http://a5.sphotos.ak.fbcdn.net/hphot...08140760_n.jpg

the feed from the heater assembly had certainly seen some better days as had the mounting ponts for the top dash vents shown below it
http://a1.sphotos.ak.fbcdn.net/hphot...23881127_n.jpg

restored to a more functional shape and the mounting points for the dash vent strengthened
http://a3.sphotos.ak.fbcdn.net/hphot...33099295_n.jpg

holes in the bottom edge of the dash
http://a6.sphotos.ak.fbcdn.net/hphot...83537643_n.jpg

repaired with resin them skim filled for a smooth finish
http://a7.sphotos.ak.fbcdn.net/hphot...10563848_n.jpg

bottom edge of dash was breaking up and vinyl chipped away all along the lower edge
http://a4.sphotos.ak.fbcdn.net/hphot...95900228_n.jpg

structure stabilised with resin
http://a2.sphotos.ak.fbcdn.net/hphot...88016896_n.jpg

vinyl all glued back down and edge skim filled where needed
http://a8.sphotos.ak.fbcdn.net/hphot...50644071_n.jpg

mounting hole in the edge of the dash was broken out
http://a4.sphotos.ak.fbcdn.net/hphot...71043127_n.jpg
http://a6.sphotos.ak.fbcdn.net/hphot...09984278_n.jpg

structure repaired and shaping re-finished
http://a1.sphotos.ak.fbcdn.net/hphot...88813425_n.jpg
http://a7.sphotos.ak.fbcdn.net/hphot...96836300_n.jpg

nick in the face of dashboard
http://a8.sphotos.ak.fbcdn.net/hphot...02509292_n.jpg

repaired with resin so that split wont creep and sanded flush
http://a2.sphotos.ak.fbcdn.net/hphot...28825445_n.jpg

hole in the back of dash
http://a3.sphotos.ak.fbcdn.net/hphot...68443173_n.jpg

filled with resin and refinished
http://a5.sphotos.ak.fbcdn.net/hphot...24654695_n.jpg

and finaly some pictures of the finished dash restored and ready to go

http://a3.sphotos.ak.fbcdn.net/hphot...32344937_n.jpg

http://a2.sphotos.ak.fbcdn.net/hphot...71202130_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot...59268951_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphot...98783549_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphot...48002435_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphot...29604506_n.jpg

http://a7.sphotos.ak.fbcdn.net/hphot...97793444_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...36636155_n.jpg

http://a2.sphotos.ak.fbcdn.net/hphot...47216794_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot...91955179_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...69560320_n.jpg

http://a7.sphotos.ak.fbcdn.net/hphot...05183828_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphot...72925219_n.jpg

http://www.facebook.com/phoenixautosport

http://www.facebook.com/phoenixautosport
some of our latest work, a vauxhall Z16XE rocker cover in black
http://a7.sphotos.ak.fbcdn.net/hphot...74749822_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...89729721_n.jpg

http://a3.sphotos.ak.fbcdn.net/hphot...48519788_n.jpg

like us on facebook to keep up to date with all our work
http://www.facebook.com/phoenixautosport

http://www.facebook.com/phoenixautosport
the latest project a nissan pulsar dash in for repair, modification and flocking

the dash as recieved, has had a hole cut in the front for a guage that the customer wants filled, customer has made a start on fitting a guage pod by cutting away the vinyl to expose the plastic structure of the dash on the top where the pod is to be fitted, also the dash has several areas of damage to be addressed.

http://a6.sphotos.ak.fbcdn.net/hphot...86373550_n.jpg

first pieces of damage were at the back left side of the dash
http://a2.sphotos.ak.fbcdn.net/hphot...88200590_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot...81907356_n.jpg

both repaired with cyanoacryalate resin and skim filled to restore the correct shaping
http://a5.sphotos.ak.fbcdn.net/hphot...27722686_n.jpg

next was some pretty major damage to the front edge of the dash
http://a1.sphotos.ak.fbcdn.net/hphot...38797890_n.jpg

again repaired with resin and filled to restore shaping
http://a3.sphotos.ak.fbcdn.net/hphot...83554523_n.jpg

more damage to the tray on the top of the dash
http://a7.sphotos.ak.fbcdn.net/hphot...97827261_n.jpg

repaired and refinished
http://a1.sphotos.ak.fbcdn.net/hphot...38194760_n.jpg

guage pod location as we recieved the dash
http://a4.sphotos.ak.fbcdn.net/hphot...62133372_n.jpg

cleaned up the mounting surface and cut out underneath the pod to allow easy routing of wires / pipes
http://a7.sphotos.ak.fbcdn.net/hphot...85838950_n.jpg

guage pod fixed in place with cyanoacryalate resin also the edges of the vinyl were consolidated with resin, this helps to stop any cracks from starting from the edge, once cured excess was sanded away
http://a8.sphotos.ak.fbcdn.net/hphot...89772089_n.jpg

dashboard was set level and space around guage pod filled with epoxy and left to cure
http://a1.sphotos.ak.fbcdn.net/hphot...22320632_n.jpg

pod was then filled and blended in to give a nicer final finish, grooves in the sides of the pod that were originaly to allow 2 screws to be used to fit the pod were also filled as they served no purpose now and looked out of place
http://a6.sphotos.ak.fbcdn.net/hphot...52477015_n.jpg

hole in front of the dash when we recieved it needed filling
http://a3.sphotos.ak.fbcdn.net/hphot...32999710_n.jpg

we moulded a round puck of epoxy to fit the hole and then shaped the face to match the shape of the dash front and beveled the edges to allow it to be bonded in place, it was also backed by plastic reinforcement behind on the inside of the dash
http://a5.sphotos.ak.fbcdn.net/hphot...46253245_n.jpg

face was then skim filled to resore the dash's original shaping
http://a7.sphotos.ak.fbcdn.net/hphot...02446277_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot...39718019_n.jpg

dash was flocked earlier today, will add more pics once it has cured and the excess flock has been removed

like us on facebook to keep up to date with all our work
http://www.facebook.com/phoenixautosport

http://www.facebook.com/phoenixautosport

pulsar dash now flocked

http://a4.sphotos.ak.fbcdn.net/hphot...48115023_n.jpg


http://a3.sphotos.ak.fbcdn.net/hphot...46410262_n.jpg


http://a5.sphotos.ak.fbcdn.net/hphot...21280837_n.jpg


http://a1.sphotos.ak.fbcdn.net/hphot...04671935_n.jpg


http://a7.sphotos.ak.fbcdn.net/hphot...90874407_n.jpg


http://a5.sphotos.ak.fbcdn.net/hphot...56803117_n.jpg


http://a3.sphotos.ak.fbcdn.net/hphot...14384980_n.jpg


http://a2.sphotos.ak.fbcdn.net/hphot...40145327_n.jpg

http://www.facebook.com/phoenixautosport

http://www.facebook.com/phoenixautosport

we had a modified centre dash panel for a focus mk1 in for flocking today

http://a6.sphotos.ak.fbcdn.net/hphot...29138770_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphot...39640456_n.jpg

http://www.facebook.com/phoenixautosport

http://www.facebook.com/phoenixautosport

we had a modified dashboard for a renault 5 in for repair and flocking this week along with some door trims to go with it

http://a2.sphotos.ak.fbcdn.net/hphot...94700720_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot...92510747_n.jpg

http://a7.sphotos.ak.fbcdn.net/hphot...42858440_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...90516446_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot...52261083_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphot...99922388_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphot...57727069_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphot...72844064_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot...25891973_n.jpg

http://a2.sphotos.ak.fbcdn.net/hphot...84976519_n.jpg

http://www.facebook.com/phoenixautosport

My bits look mint mate!! :D :D

Nice one!! Il package them other bits tomorrow and have them sent!

Nice. I may be up for doing this.:agree:

How much for R5 gtt 2 rear quarters + postage to BT63 5NQ.These will be stripped and cleaned with no damage.

Quote:

---

Originally Posted by Charlie

How much for R5 gtt 2 rear quarters + postage to BT63 5NQ.These will be stripped and cleaned with no damage.

---

hi there, for a pair of rear quarters you would be looking at £60 including return postage :agree:

Quote:

---

Originally Posted by MATT C Ringworm Tuning

Nice. I may be up for doing this.:agree:

---

its also a great way to tidy up your dash if there is any damage to it as i can repair most damage or issues they may have prior to flocking, minor repairs are covered in the flocking cost however any repair work taking longer than 30mins will be quoted before commencement and charged at reasonable rates

Gota say dude.. bloody credit to the forums, great work and you WILL be getting custom from me come the end of this year.

Quote:

---

Originally Posted by djinuk

Gota say dude.. bloody credit to the forums, great work and you WILL be getting custom from me come the end of this year.

---

cheers, appreciate it :agree:

Please keep posting pics of the work you do, it's excellent. :agree:

Can you send me your address and I will get them off this week. What s your turn around time?.

Quote:

---

Originally Posted by Charlie

Can you send me your address and I will get them off this week. What s your turn around time?.

---

hi there, addres is

Phoenix Autosport
Unit 3 Blackwell Ind Est
Station Rd
Kimbolton
Cambs
PE28 0JQ

if you can put a note in with your contact details and color you want it will help me keep everything organised :laugh:

current turn around time is about 5-7 working days alowing for a good amount of curing time, cheers,
carl

Hi Carl, will get that sorted this week.

Thanks
Paul

Hi there interested in getting my 5 dash done in black what other colours can be done I've seen black grey blue any others red purple orange please let me know regards :)

Quote:

---

Originally Posted by GT TURBO BEN

Hi there interested in getting my 5 dash done in black what other colours can be done I've seen black grey blue any others red purple orange please let me know regards :)

---

hi there, the color chart below shows most of the standard flock colors but if you want something specific i can do custom mixes to achieve different results, and if you want a glitter effect in it i can sort that as well ;)
http://a8.sphotos.ak.fbcdn.net/hphot...34733209_n.jpg

http://www.facebook.com/phoenixautosport

a few images sent in by a customer, loving the way it matches the wheel

http://a8.sphotos.ak.fbcdn.net/hphot...17952248_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot...29177366_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphot...88685682_n.jpg

http://a3.sphotos.ak.fbcdn.net/hphot...71936317_n.jpg

http://www.facebook.com/phoenixautosport

Hi Carl, rear cards are on their way, you should have them Monday or Tuesday.

Cheers
Paul

Quote:

---

Originally Posted by Charlie

Hi Carl, rear cards are on their way, you should have them Monday or Tuesday.

Cheers
Paul

---

got them today :agree: will get them prepared tomorrow and flocked monday ;)

http://www.facebook.com/phoenixautosport

we had some more parts in to go with the modified dashboard we did for the renault 5

a common problem with getting these sort of dashes flocked is things like the switches jaming up due to companies flocking where is convenient rather than putting in the effort to make sure everything will work as it should, carefull masking and finishing to remove excess flock is the name of the game.
http://a2.sphotos.ak.fbcdn.net/hphot...36098235_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot...43773122_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphot...73312009_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphot...09815759_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...75173774_n.jpg

http://a7.sphotos.ak.fbcdn.net/hphot...81526098_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphot...81344065_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphot...95458574_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphot...33371866_n.jpg

http://a3.sphotos.ak.fbcdn.net/hphot...98829898_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphot...46083324_n.jpg

http://a7.sphotos.ak.fbcdn.net/hphot...28723618_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...16647375_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphot...45726543_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphot...75921677_n.jpg

http://www.facebook.com/phoenixautosport

Looks amazing mate!! Cannot wait to get it fitted.. Thanks alot:agree:

http://www.facebook.com/phoenixautosport

we have decided to offer our custom mix graphite grey flock at the same price as normal colours due to demand meaning we are able to mix it in larger quantities and hold as a stock colour.
due to it being made from a mix of different greys and black it has a slightly sandy / grained appearance which gives a realy nice effect. some images below of graphite parts and of a dash we have done in 2 tone black and graphite grey

http://a4.sphotos.ak.fbcdn.net/hphot...78974379_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...21967341_n.jpg

http://a7.sphotos.ak.fbcdn.net/hphot...41487437_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphot...87745100_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot...96515490_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphot...47911117_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphot...42755226_n.jpg

http://a3.sphotos.ak.fbcdn.net/hphot...88434362_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphot...81615104_n.jpg

http://a3.sphotos.ak.fbcdn.net/hphot...57899583_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...56851200_n.jpg

http://a7.sphotos.ak.fbcdn.net/hphot...47693729_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphot...92975384_n.jpg


http://www.facebook.com/phoenixautosport

What is it with Mk1 Corsa owners. That dash is always going to be utterly hideous no matter what you do to it :laugh:

Great quality work though :agree:

Looks class mate. Il eventually get my corsa Gsi dash done :agree:

:innocent:

http://www.facebook.com/phoenixautosport

a few of todays endeavours and triumphs.
first up a gauge pod for a corsa b made from a tray found in low spec cars and vans that didnt come with teh TID display, i cut down and grafted a twin pod onto it and smoothed it in for a seamless finish

http://a6.sphotos.ak.fbcdn.net/hphot...01887196_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphot...15127530_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...58291871_n.jpg

http://a7.sphotos.ak.fbcdn.net/hphot...88335646_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphot...07548346_n.jpg

http://a3.sphotos.ak.fbcdn.net/hphot...95822743_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphot...84317673_n.jpg


next up an astra g centre console that i have modified by moving the TID display down to the lower din slot freeing up space up top for a double gauge pod

http://a5.sphotos.ak.fbcdn.net/hphot...55123457_n.jpg

http://a7.sphotos.ak.fbcdn.net/hphot...45076236_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphot...61624796_n.jpg


last up a pair of renault 5 turbo rear quarter trim panels in a flock colour matched to the original trim fabric

http://a8.sphotos.ak.fbcdn.net/hphot...38150578_n.jpg

http://a2.sphotos.ak.fbcdn.net/hphot...37370115_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...99612501_n.jpg


http://www.facebook.com/phoenixautosport

http://www.facebook.com/phoenixautosport

astra centre console now flocked

http://a1.sphotos.ak.fbcdn.net/hphot...41431179_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphot...70098119_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphot...69797752_n.jpg

http://a2.sphotos.ak.fbcdn.net/hphot...61177726_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...54258077_n.jpg

we also had in a megane mk2 centre console for flocking in royal blue

http://a8.sphotos.ak.fbcdn.net/hphot...89072098_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphot...54661362_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphot...29008532_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...23336842_n.jpg

http://a7.sphotos.ak.fbcdn.net/hphot...54036171_n.jpg

http://www.facebook.com/phoenixautosport

http://www.facebook.com/phoenixautosport

some parts we had in this week, a set of interior parts from an astra 888 coupe that the customer wanted done in flock colour matched to the alcantara used on the seats centre panels

http://a3.sphotos.ak.fbcdn.net/hphot...23277916_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphot...02313693_n.jpg

http://a7.sphotos.ak.fbcdn.net/hphot...97146458_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...69812843_n.jpg

http://a2.sphotos.ak.fbcdn.net/hphot...98188170_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot...52025572_n.jpg

http://a3.sphotos.ak.fbcdn.net/hphot...97155297_n.jpg


http://a1.sphotos.ak.fbcdn.net/hphot...25984783_n.jpg

http://a7.sphotos.ak.fbcdn.net/hphot...26976975_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphot...82658474_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphot...92444941_n.jpg

http://a2.sphotos.ak.fbcdn.net/hphot...77656897_n.jpg

http://www.facebook.com/phoenixautosport

http://www.facebook.com/phoenixautosport

something a bit different, an old school leather ford wheel, stripped, sanded and flocked.

http://a5.sphotos.ak.fbcdn.net/hphot...42413465_n.jpg

http://a3.sphotos.ak.fbcdn.net/hphot...92205191_n.jpg

http://a2.sphotos.ak.fbcdn.net/hphot...34264830_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphot...95522075_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphot...05783166_n.jpg


http://www.facebook.com/phoenixautosport

Some amazing work there,if i wasnt going completely oe (minus cd player) then you would definately be getting alot of work from me! :)

http://www.facebook.com/phoenixautosport

some mk2 door cards stripped and flocked in black, sorry for the terrible pics, it hasnt stopped raining for days so havent managed to get pics in natural light, these taken under 1600w of floodlighting the cards are actualy a uniform jet black

http://a6.sphotos.ak.fbcdn.net/hphot...04016456_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphot...70588390_n.jpg

http://www.facebook.com/phoenixautosport

http://www.facebook.com/phoenixautosport

our latest a 6th gen toyota celica dash from a gt4 in black flock.

http://a5.sphotos.ak.fbcdn.net/hphot...90981500_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphot...65407248_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphot...22287850_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot..._7280426_n.jpg

http://a2.sphotos.ak.fbcdn.net/hphot...09694947_n.jpg


http://www.facebook.com/phoenixautosport

What happens if you make a mistake when applying it? Are you able to start again and still manage to achieve the right result??

Quote:

---

Originally Posted by Trevhib

What happens if you make a mistake when applying it? Are you able to start again and still manage to achieve the right result??

---

You're Flocked :rolleyes: :laugh:

:laugh:

whilst its still wet you can remove it with acetone but its a realy awful job to do, takes ages, half kills you with the fumes and means you gotta prep the whole thing again, its the sort of mistake you only make once then you make sure you get it right from there on lol, why you after something a bit tricky doing :)

Quote:

---

Originally Posted by Phoenix Autosport

why, you after something a bit tricky doing :)

---

I was potentially thinking of a late 80's Peter Beardsley.
http://www.youtube.com/watch?v=nYil_M0F_3s

Can you give me an estimate?

Quote:

---

Originally Posted by Trevhib

I was potentially thinking of a late 80's Peter Beardsley.
http://www.youtube.com/watch?v=nYil_M0F_3s

Can you give me an estimate?

---

i think flocking the deceased might be frowned upon by the law :laugh:

:D

http://www.facebook.com/phoenixautosport

a corsa c dash we have had in, customer had modified it to fit around their roll cage, we did some finishing work to the modifications and flocked it in black.

http://a2.sphotos.ak.fbcdn.net/hphot...66428418_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot...57598549_n.jpg

http://a7.sphotos.ak.fbcdn.net/hphot...92007408_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...91089856_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot...28783339_n.jpg

http://a2.sphotos.ak.fbcdn.net/hphot...65687550_n.jpg

http://www.facebook.com/phoenixautosport

http://www.facebook.com/phoenixautosport

another modified dash, this time for a mk2 astra we did some minor repairs to the edges of the dash where the compressed card that it is constructed from had started to break apart, we stabilised the structure using cyanoacryalate and then preped it and flocked it in black.

a few images of the repair work done on the dash, this was repeated in many places over the dash but i didnt want to bore everyone

http://a7.sphotos.ak.fbcdn.net/hphot...10534557_n.jpg

http://a2.sphotos.ak.fbcdn.net/hphot...83445755_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot...77704388_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...52984779_n.jpg

and some images of the final result

http://a3.sphotos.ak.fbcdn.net/hphot...39239665_n.jpg

http://a7.sphotos.ak.fbcdn.net/hphot...73596510_n.jpg

http://a2.sphotos.ak.fbcdn.net/hphot...11332948_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphot...01159820_n.jpg

http://a3.sphotos.ak.fbcdn.net/hphot...01633700_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphot...48023981_n.jpg

http://www.facebook.com/phoenixautosport

i decided to make a custom centre console for my renault 5 turbo as i wanted to fit a more modern stereo but i wanted to keep the car looking period and simple inside so i put my original centre console into storage in case i want to change back at any time in the future and started work on a new one.
basicaly im going to graft in a mk1 clio stereo cover to hide the more modern stereo from prying eyes.

1) how cover looks in the open position
http://a3.sphotos.ak.fbcdn.net/hphot...73430068_n.jpg

2) and how it looks closed
http://a5.sphotos.ak.fbcdn.net/hphot...13051717_n.jpg

3) first thing was to remove the plate sticking up at the back as this will just get in the way going into the 5
http://a7.sphotos.ak.fbcdn.net/hphot...85092771_n.jpg

4) top edge finished neatly and straight with a sanding block
http://a1.sphotos.ak.fbcdn.net/hphot...48436153_n.jpg

5) view from the back, the top edge of this will fit against where the bottom of the ashtray screws in in the 5
http://a4.sphotos.ak.fbcdn.net/hphot...19608808_n.jpg

6) because the fixings for the ashtray are recessed a spacer was made from a couple of layers of plastic bonded together and shaped to fit into the recess, 1mm pilot holes were drilled in the correct place for the fixings
http://a6.sphotos.ak.fbcdn.net/hphot...74508922_n.jpg

7) after trial fitting into the car to get positioning correct the spacer was bonded to the clio stereo cover pilot holes were drilled through into the cover and pegged with wire to keep allignment right
http://a8.sphotos.ak.fbcdn.net/hphot...46482747_n.jpg

8) top edge was finished flush
http://a2.sphotos.ak.fbcdn.net/hphot...10411991_n.jpg

9) the first of 2 donor centre consoles, this one will form the basis of the new console it came from ebay with a broken top mount but as this is not needed the bargan price was a plus
http://a1.sphotos.ak.fbcdn.net/hphot...81711239_n.jpg

10) console now cut out for ready for grafting in the clio stereo flap, as this will sit slightly forwards of the original possition the switches will also need to move forwards so the mountings are cut out and will be relocated later
http://a7.sphotos.ak.fbcdn.net/hphot...27180246_n.jpg

11) front on view of the console
http://a8.sphotos.ak.fbcdn.net/hphot...30711194_n.jpg

12) after fitting the console into the car and offering the clio cover up to the ashtray mounting point the 2 were tacked together to ensure correct possitioning
http://a6.sphotos.ak.fbcdn.net/hphot...95694881_n.jpg

13) rear view showing pieces of plastic temporarily tacked in to hold position correct
http://a4.sphotos.ak.fbcdn.net/hphot...16061848_n.jpg

14) the second centre console, again an ebay find in with a job lot of other parts had holes cracks and front vents broken out and has been sprayed with black dye but will do nicely as a donor to take sections from, the front section was cut out for grafting into the new console to form a new front edge
http://a7.sphotos.ak.fbcdn.net/hphot...18857316_n.jpg

15) section was trimmed to fit and cut in half as moving it forwards requires it to be a couple of mm narower side to side, pic shows first side bonded into place, note a strip has also been bonded in the back edge of the switch hole as the front section will fit to this area, also the sides of the clio cover has been cut away as the sides will need to be reconstructed to match the lines of the console
http://a3.sphotos.ak.fbcdn.net/hphot...34295716_n.jpg

16) close up of the first section grafted in
http://a4.sphotos.ak.fbcdn.net/hphot...03757704_n.jpg

17) plate bonded inside to provide a base
http://a1.sphotos.ak.fbcdn.net/hphot...12821656_n.jpg

18) section cut from the other console bonded on to form the side also a plate bonded inside along the front to add strength
http://a3.sphotos.ak.fbcdn.net/hphot...94432059_n.jpg

19) plate on side filled with cyanoacryalate and finished to shape inc fine filling of some of the previous parts
http://a5.sphotos.ak.fbcdn.net/hphot...7_169449_n.jpg

20) next section of side bonded in place along with another strengthening platre inside
http://a8.sphotos.ak.fbcdn.net/hphot...89444107_n.jpg

21) right hand front section bonded in place
http://a2.sphotos.ak.fbcdn.net/hphot...82296666_n.jpg

22) switch panel section was cut from the other centre console along with the curved side profile as i want to angle them slightly so that it leads into the stereo area rather than there being a big step up to it
http://a4.sphotos.ak.fbcdn.net/hphot...32105731_n.jpg

23) section was cut out and replaced with part from the other consoles switch area in order to form an extra 2 switch locations for a future mod
http://a6.sphotos.ak.fbcdn.net/hphot...93131380_n.jpg

24) plates bonded front and back to strengthen the join between the parts
http://a3.sphotos.ak.fbcdn.net/hphot...72524242_n.jpg

25) 5 switch recess ready to fit
http://a6.sphotos.ak.fbcdn.net/hphot...13478264_n.jpg

26) switch panel tacked into place
http://a2.sphotos.ak.fbcdn.net/hphot...43238084_n.jpg

27) front view of switch panel tacked in place
http://a8.sphotos.ak.fbcdn.net/hphot...03478623_n.jpg

28) switch panel bonded in all round on front and back and skim filled to get final shaping
http://a5.sphotos.ak.fbcdn.net/hphot...57883978_n.jpg

29) started work on the other side of the console
http://a7.sphotos.ak.fbcdn.net/hphot...84235776_n.jpg

30) got the right hand side up to the same stage as the left, also filled the top sides either side of the stereo opening with cyanoacryalate to make them good and solid, gone over the entire front end filling any joins, nicks and screw holes from a previous owners additions, then sanded everything forwards of the stereo opening to give a good base for the flock to adhere to
http://a8.sphotos.ak.fbcdn.net/hphot...51058523_n.jpg

31) trial fitted the console to check the back edge as i had to alter the angle of the top section slightly to keep the stereo angle correct so as to miss the heater assembly, as i expected this has left a gap at the back of about 3mm so i will have to fit a plate along the back then refit the part that fits the recess where the astray fixings are
http://a7.sphotos.ak.fbcdn.net/hphot...20984243_n.jpg

32) how it will look with the cover in place
http://a6.sphotos.ak.fbcdn.net/hphot...38336311_n.jpg

33) in order to rectify the small gap between the rear of the stereo surround created when i had to angle the surround to avoid the stereo hitting the heater assembly behind where it fits the rear edge needed remodeling, to do this i first removed the locating piece i had previously fitted on the back and sanded back the surface so that a plate could be bonded on to it to fill the gap
http://a6.sphotos.ak.fbcdn.net/hphot...22034229_n.jpg

34) plate now bonded in place left slightly oversize so that it can be finished flush along top and sides once the sides have been finished
http://a8.sphotos.ak.fbcdn.net/hphot...23726662_n.jpg

35) locating holes were drilled through from the front so that the locating piece could be refitted in the correct position again using wire guides
http://a2.sphotos.ak.fbcdn.net/hphot...06131154_n.jpg

36) both sides were completed structuraly with plastic and sanded to shape
http://a1.sphotos.ak.fbcdn.net/hphot...61574450_n.jpg

37) fine filling done to give final surface smooth for flocking
http://a7.sphotos.ak.fbcdn.net/hphot...18831197_n.jpg

38) to prepare the cover flap the plastic section was first removed from the metal frame
http://a4.sphotos.ak.fbcdn.net/hphot...61616695_n.jpg

39) to allow for the extra thickness of the flock coating whilst allowing the flap to operate smoothly without catching i removed approx 1.5mm from each side of the flap using a sanding block
http://a6.sphotos.ak.fbcdn.net/hphot...25528138_n.jpg

40) edges were then reshaped to get rid of the sharp corners and restore the original shape, also the surface was keyed ready for flocking
http://a2.sphotos.ak.fbcdn.net/hphot...25496247_n.jpg

41) like most renault 5 centre consoles the mounting lugs had seen better days and whilst they were still functional with washers i decided to sort them before they got any worse
http://a3.sphotos.ak.fbcdn.net/hphot...07922915_n.jpg

42) plates bonded in place to the top of the damaged mountings and slots made using a dremmel and a small milling cutter
http://a5.sphotos.ak.fbcdn.net/hphot...48694147_n.jpg

43) opening the flap by hand would just be far to 1991 for my liking so im mounting a servo to do the job for me, bracket has been made from a section of plastic crafted to fit the underneath of the back where the flap stowes when open
http://a7.sphotos.ak.fbcdn.net/hphot...36926386_n.jpg

44) bracket will be bonded into the console once link rods etc have been made to the correct length, extra blocks have been glued on where the screws fit to give them a good thickness to fit into securely
http://a1.sphotos.ak.fbcdn.net/hphot...58685334_n.jpg

45) shaped control rod made from plastic, this may be changed for metal at a later date but for development purposes its far easier to cut, bend, glue and modify a bit of plastic to get the right shape and length, proper fixings are substiuted with wire at the moment to allow me to pull apart and put back together in second rather than minutes
http://a4.sphotos.ak.fbcdn.net/hphot...13656969_n.jpg

46) slot at the back of the surround cut to allow the control rod to pass through
http://a6.sphotos.ak.fbcdn.net/hphot...00453738_n.jpg

47) rods attached and servo/bracket held into place at this point the final servo attachment hasnt been made so there is a rod joining the servo centre point and the arm to allow me to work out where parts will fall as the servo moves and determine the angles of movement required
http://a2.sphotos.ak.fbcdn.net/hphot...53480891_n.jpg

48) servo bracket now fixed into place and arms trimmed to length to give the correct amount of movement, joints still pinned with wire at the moment until fixings arrive
http://a7.sphotos.ak.fbcdn.net/hphot...92386354_n.jpg

49) side view of mechanism
http://a4.sphotos.ak.fbcdn.net/hphot...15887292_n.jpg

SEE THE VIDEO OF TESTING THE SERVO MECHANISM HERE
http://www.facebook.com/photo.php?v=368140149899654

50) bottom right - small holes for springs that normaly hold the flap open or shut have been filled and sanded as they are no longer required. middle left mounting screw holes are also surplus to requirements
http://a2.sphotos.ak.fbcdn.net/hphot...61440002_n.jpg

51) screw hole shown from back top left of stereo opening
http://a8.sphotos.ak.fbcdn.net/hphot...73221912_n.jpg

52) screw hole blanked with plastic on the back
http://a7.sphotos.ak.fbcdn.net/hphot...82900761_n.jpg

53) screw hole filled with cyanoacryalate from the front
http://a1.sphotos.ak.fbcdn.net/hphot...06171468_n.jpg

54) filled screw hole ground back to a smooth finish using a small milling cutter in a dremmel
http://a6.sphotos.ak.fbcdn.net/hphot...43167672_n.jpg

55) bracket for the servo was touching the heater assembly and lower edge of dash when fitted to car and would not allow the console to quite fit into place properly so the shape of the back edge was revised to give the required clearance
http://a4.sphotos.ak.fbcdn.net/hphot...88993021_n.jpg

56) areas that were modified have been etch primed so that any imperfections can be seen easily. all imperfections filled.
http://a3.sphotos.ak.fbcdn.net/hphot...27228827_n.jpg

57) sanded back and blown over sanded areas.
http://a5.sphotos.ak.fbcdn.net/hphot...75547087_n.jpg

58) front view
http://a8.sphotos.ak.fbcdn.net/hphot...79164770_n.jpg

59) top view
http://a6.sphotos.ak.fbcdn.net/hphot...53031438_n.jpg

60) top mounting holes opened up to correct size for fixing screws, as these will locate where the bottom of the ashtray mounts the fixing screws will need to be conciderably longer than the originals.
http://a4.sphotos.ak.fbcdn.net/hphot...60547071_n.jpg

61) holes countersunk so that screws can be fitted flush, as well as being neat this is also required to avoid the flap getting caught on the fixings.
http://a1.sphotos.ak.fbcdn.net/hphot...99913107_n.jpg

62) checking fixing sits flush
http://a7.sphotos.ak.fbcdn.net/hphot...77104875_n.jpg

63) rear of console with fixings in.
http://a5.sphotos.ak.fbcdn.net/hphot...39441610_n.jpg

64) console now flocked
http://a3.sphotos.ak.fbcdn.net/hphot...62387498_n.jpg

65) front view
http://a5.sphotos.ak.fbcdn.net/hphot...56756833_n.jpg

66) close up of side
http://a8.sphotos.ak.fbcdn.net/hphot...30721731_n.jpg

67) flap re-assembled however best laid plans and all i didnt allow for the cover when i made the arm meaning it catches where the cover overhangs the bracket
http://a2.sphotos.ak.fbcdn.net/hphot...83397127_n.jpg

68) a little re-shaping to give some more clearance
http://a4.sphotos.ak.fbcdn.net/hphot...49804832_n.jpg

69) now allows arm to move further to allow for the cover when fully open
http://a6.sphotos.ak.fbcdn.net/hphot...34686638_n.jpg

70) all re-assembled
http://a7.sphotos.ak.fbcdn.net/hphot...88804126_n.jpg

71) comparison to the original console with flap open
http://a1.sphotos.ak.fbcdn.net/hphot...93976327_n.jpg

72) comparison to the original console with flap closed
http://a5.sphotos.ak.fbcdn.net/hphot...38536081_n.jpg

And a video of testing the machanism all functions correctly after re-assembly
http://www.facebook.com/photo.php?v=387879984592337

LIKE US ON FACEBOOK TO BE KEPT UP TO DATE WITH ALL OUR WORK
http://www.facebook.com/phoenixautosport

http://www.facebook.com/phoenixautosport

some more parts in this week, an astra gauge pod that the customer wanted colour matched to his cars A pillar

http://a2.sphotos.ak.fbcdn.net/hphot...36908749_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphot...19169242_n.jpg

http://a3.sphotos.ak.fbcdn.net/hphot...06476804_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...89627515_n.jpg

and some more interior trims for a previous customers megane flocked in royal blue to match the previous parts he had done

http://a1.sphotos.ak.fbcdn.net/hphot...79667280_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot...23712044_n.jpg

http://a2.sphotos.ak.fbcdn.net/hphot...65474625_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphot...90147418_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphot...51227035_n.jpg

http://a7.sphotos.ak.fbcdn.net/hphot...53386622_n.jpg

http://www.facebook.com/phoenixautosport

http://www.facebook.com/phoenixautosport

some images of the megane parts back where they belong

http://a2.sphotos.ak.fbcdn.net/hphot...65699569_n.jpg

http://a3.sphotos.ak.fbcdn.net/hphot...24176119_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphot...33130771_n.jpg

http://a7.sphotos.ak.fbcdn.net/hphot...54238779_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...73172926_n.jpg

http://a2.sphotos.ak.fbcdn.net/hphot...84513743_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot...00842656_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphot...16619330_n.jpg

http://a3.sphotos.ak.fbcdn.net/hphot...46701163_n.jpg

and a mk2 astra sunroof cover stripped and reflocked in black

http://a6.sphotos.ak.fbcdn.net/hphot...73305012_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphot...36876510_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...50544105_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphot...32430672_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphot...49358885_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot...57622531_n.jpg

http://a2.sphotos.ak.fbcdn.net/hphot...25140156_n.jpg

http://a7.sphotos.ak.fbcdn.net/hphot...85864956_n.jpg

http://www.facebook.com/phoenixautosport

Makes a fantastic difference in the dull Megane interior :agree:

Quote:

---

Originally Posted by Trevhib

Makes a fantastic difference in the dull Megane interior :agree:

---

as standard they are a tad dull for a sports model, i realy like the look of it with the flocked parts in the same colour as the bodywork i think the guy struck the balance about right on what parts to have done, it doesnt look overdone just enough to make it look a bit sporty

http://www.facebook.com/phoenixautosport

Had a customer send in some renault 5 door cards for refurbishment and a bit of modification so that he could fit his aftermarket speaker grills into them instead of the original plastic grills.

1) these are the grills that the customer wanted fitted into the door cards
http://a8.sphotos.ak.fbcdn.net/hphot...63109277_n.jpg

2) lower edges of the cards had a fair bit of water damage so section at a time they were clamped flat and painted with a thinned resin so that it penetrated the card and then set in the correct flat shape
http://a5.sphotos.ak.fbcdn.net/hphot...14531183_n.jpg

3) cracks and surrounding area impregnated with cyanoacryalate to restore original strength
http://a3.sphotos.ak.fbcdn.net/hphot...27651112_n.jpg

4) again area impregnated with cyanoacryalate to restore original strength
http://a1.sphotos.ak.fbcdn.net/hphot...63856675_n.jpg

5) this area had 2 cracks, distortion to the shape and a missing fixing so it was clamped in place for teh repairs to be done
http://a7.sphotos.ak.fbcdn.net/hphot...89353740_n.jpg

6) area surrounding cracks and where the fixing was missing were soaked in cyanoacryalate, fixing was then clamped in place to set
http://a8.sphotos.ak.fbcdn.net/hphot...29522622_n.jpg

7) bolster on one side had started to collapse but damage was only in the surface layer of the card with the main structure being intact
http://a2.sphotos.ak.fbcdn.net/hphot...12031847_n.jpg

8) cracked area set with resin to prevent any further cracking occuring
http://a5.sphotos.ak.fbcdn.net/hphot...22950045_n.jpg

9) to mount the aftermarket grills i cut some rings from mdf sheet
http://a3.sphotos.ak.fbcdn.net/hphot...42514401_n.jpg

10) mounted the mdf rings in the back of teh door cards so that they sit slightly below the level of the normal speaker aperture
http://a1.sphotos.ak.fbcdn.net/hphot...63467365_n.jpg

11) view from the top, speaker grill tabs were already missing so it saved me a job removing them :)
http://a7.sphotos.ak.fbcdn.net/hphot...12999990_n.jpg

12) edges of the speaker holes had seen better days and were crumbling
http://a6.sphotos.ak.fbcdn.net/hphot...97674683_n.jpg

13) edges soaked with cyanoacryalate to make them good and solid
http://a4.sphotos.ak.fbcdn.net/hphot...79592081_n.jpg

14) edges sanded down and filled as required to restore shaping
http://a2.sphotos.ak.fbcdn.net/hphot...62832295_n.jpg

15) blocks fitted to the back of the rings to give something substantial for the grills fixing screws to fit into
http://a7.sphotos.ak.fbcdn.net/hphot...56144874_n.jpg

16) close view
http://a1.sphotos.ak.fbcdn.net/hphot...68238426_n.jpg

17) speaker grill surround trial fitted, internal edges refinished as required
http://a4.sphotos.ak.fbcdn.net/hphot...34024927_n.jpg

18) refinished edge
http://a6.sphotos.ak.fbcdn.net/hphot...09886631_n.jpg

19 close view with surround in place
http://a8.sphotos.ak.fbcdn.net/hphot...89009885_n.jpg

20) cards coated in a layer of thinned epoxy, this soaks into the surface ensuring good adhesion and allows refinishing of the card surface to improve the quality of finish
http://a2.sphotos.ak.fbcdn.net/hphot...86641916_n.jpg

21) surface refinished
http://a3.sphotos.ak.fbcdn.net/hphot...21692883_n.jpg

22) close up of speaker area after refinishing
http://a5.sphotos.ak.fbcdn.net/hphot...95303109_n.jpg

23) door cards flocked
http://a7.sphotos.ak.fbcdn.net/hphot...55854100_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...81216148_n.jpg

http://a2.sphotos.ak.fbcdn.net/hphot...55481346_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot...33938492_n.jpg

http://a3.sphotos.ak.fbcdn.net/hphot...98747326_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphot...05085657_n.jpg

http://a7.sphotos.ak.fbcdn.net/hphot...79915695_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...02624627_n.jpg

24) with the aftermarket grills fitted
http://a4.sphotos.ak.fbcdn.net/hphot...51429554_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphot...92894828_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot...16249448_n.jpg

http://a2.sphotos.ak.fbcdn.net/hphot...11250994_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...76167084_n.jpg

http://www.facebook.com/phoenixautosport

http://www.facebook.com/phoenixautosport

had some peugeot 207 bits in to us recently, parts needed a fair bit of cleaning as they had been previously painted, all parts were cleaned down by literaly scraping every last bit off by hand then steam cleaning, once dry they were then sanded and etch primed before flocking could be done

http://a1.sphotos.ak.fbcdn.net/hphot...31124183_n.jpg


drivers a pillar had a pod fitted, when i sanded the surface back i found a combination of fibreglass and filler that was cracking away from the plastic of the pillar
http://a3.sphotos.ak.fbcdn.net/hphot...63319416_n.jpg

close up of the pod, decided it would be more viable to strip it back to the bare pillar and build from scratch
http://a5.sphotos.ak.fbcdn.net/hphot...76300837_n.jpg

pillar stripped bare and holes cut to give access to the back of the new pod
http://a8.sphotos.ak.fbcdn.net/hphot...74883214_n.jpg

close up of hole to allow maximum access, it wasnt possible to remove the part across the centre as there were mountings for the pillar attached here
http://a2.sphotos.ak.fbcdn.net/hphot...85200642_n.jpg

the gauge pod i used was cut from one of these universal pillar pods
http://a4.sphotos.ak.fbcdn.net/hphot...68411674_n.jpg

cut and trimmed to fit the shaping of the 206 pillar
http://a6.sphotos.ak.fbcdn.net/hphot...42999040_n.jpg

edges fine trimmed by repeated fitting and sanding of edges
http://a3.sphotos.ak.fbcdn.net/hphot...16805607_n.jpg

rear view of fittment
http://a2.sphotos.ak.fbcdn.net/hphot...71087774_n.jpg

pod now bonded in place, majority of adhesive is on the inside edge of the pod all the way round giving a firm fixing whilst the outside is kept neat, adhesive on the outside sanded around edges to give final shaping between the pod and pillar (no fibreglass and no filler to keep everything neat and prevent cracking)
http://a8.sphotos.ak.fbcdn.net/hphot...31134137_n.jpg

rear view
http://a6.sphotos.ak.fbcdn.net/hphot...78031892_n.jpg

front view
http://a4.sphotos.ak.fbcdn.net/hphot...55695511_n.jpg

now etch primed and flocked in black
http://a1.sphotos.ak.fbcdn.net/hphot...47729046_n.jpg

rear view
http://a7.sphotos.ak.fbcdn.net/hphot...76938991_n.jpg

front view
http://a5.sphotos.ak.fbcdn.net/hphot...79688741_n.jpg

over exposed image so that detail can be seen (black flock is a bugger to photograph due to the way it absorbs light
http://a3.sphotos.ak.fbcdn.net/hphot...78195124_n.jpg

rear pillar
http://a4.sphotos.ak.fbcdn.net/hphot...09605643_n.jpg

close up
http://a6.sphotos.ak.fbcdn.net/hphot...75042128_n.jpg

the full set of pillars
http://a1.sphotos.ak.fbcdn.net/hphot...45420043_n.jpg

b pillar and rear hatch trim
http://a7.sphotos.ak.fbcdn.net/hphot...61206054_n.jpg

b pillar flocked and insert colour coded
http://a3.sphotos.ak.fbcdn.net/hphot...55666788_n.jpg

rear hatch trim
http://a2.sphotos.ak.fbcdn.net/hphot...86875926_n.jpg

http://www.facebook.com/phoenixautosport

http://www.facebook.com/phoenixautosport

had a customer after a astra g centre console with 3 gauge pods replacing the TID display and asking for them to angle towards the driver.
starting point was one of these gauge pods

http://a6.sphotos.ak.fbcdn.net/hphot...07396572_n.jpg

and from the rear
http://a7.sphotos.ak.fbcdn.net/hphot...73234684_n.jpg

pod was cut and trimmed to fit the top of the console, also grooves were machined into the front and slits in the top so that with a little heating the front could be bent along each groove to curve the front
http://a1.sphotos.ak.fbcdn.net/hphot...89230594_n.jpg

top view
http://a3.sphotos.ak.fbcdn.net/hphot...17049165_n.jpg

donor astra centre console
http://a5.sphotos.ak.fbcdn.net/hphot...93844572_n.jpg

top section cut away where the pod will fit
http://a8.sphotos.ak.fbcdn.net/hphot...28559121_n.jpg

pod was then tacked into place angling towards the drivers position
http://a4.sphotos.ak.fbcdn.net/hphot...76050487_n.jpg

any gaps had plastic plates bonded into place for strength and all joins were filed and smoothed
http://a6.sphotos.ak.fbcdn.net/hphot...44542475_n.jpg

left edge of pod follows down into the upright of the console
http://a5.sphotos.ak.fbcdn.net/hphot...24817731_n.jpg

view from the right hand side
http://a3.sphotos.ak.fbcdn.net/hphot...06367953_n.jpg

on the left the most angled pod overhangs teh dash slightly so the pod has been sculpted to clear the dashboard
http://a8.sphotos.ak.fbcdn.net/hphot...27044485_n.jpg

close view
http://a2.sphotos.ak.fbcdn.net/hphot...95003523_n.jpg

flocked up in black
http://a2.sphotos.ak.fbcdn.net/hphot...42195937_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...16924997_n.jpg

http://a7.sphotos.ak.fbcdn.net/hphot...03519396_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphot...65178234_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphot...58140339_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot...44751294_n.jpg

http://a2.sphotos.ak.fbcdn.net/hphot...23765395_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphot...87074627_n.jpg

http://www.facebook.com/phoenixautosport

That is fantastic work :smokin:

:agree::D

http://www.facebook.com/phoenixautosport

Renault 5 dash we had in for some repairs and modification then flocking

http://a4.sphotos.ak.fbcdn.net/hphot...68498991_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot...86365570_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...32258258_n.jpg

http://a7.sphotos.ak.fbcdn.net/hphot...25972205_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot...67300347_n.jpg

http://a2.sphotos.ak.fbcdn.net/hphot...08262793_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...01361574_n.jpg

http://a3.sphotos.ak.fbcdn.net/hphot...17436105_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphot...21844048_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot...56103421_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphot...81132053_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...40636351_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphot...26010801_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphot...53163731_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot...57992190_n.jpg

http://a2.sphotos.ak.fbcdn.net/hphot...38510405_n.jpg

http://a3.sphotos.ak.fbcdn.net/hphot...46584907_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphot..._9144096_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...07455508_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot...75859396_n.jpg

http://a3.sphotos.ak.fbcdn.net/hphot...41108029_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphot...87567834_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphot...33423438_n.jpg

http://a2.sphotos.ak.fbcdn.net/hphot...32408293_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot...12063897_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...65998719_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphot...18904511_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot...47843001_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphot...95016543_n.jpg

http://a3.sphotos.ak.fbcdn.net/hphot...94507693_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...36528504_n.jpg

http://a7.sphotos.ak.fbcdn.net/hphot...66236581_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot...20721413_n.jpg

http://a2.sphotos.ak.fbcdn.net/hphot...01248229_n.jpg

http://www.facebook.com/phoenixautosport

http://www.facebook.com/phoenixautosport

all re-assembled

http://a5.sphotos.ak.fbcdn.net/hphot...15123009_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot...31347872_n.jpg

http://a2.sphotos.ak.fbcdn.net/hphot...64830989_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphot...81898814_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphot...70109955_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphot...68993993_n.jpg

http://a3.sphotos.ak.fbcdn.net/hphot...61182068_n.jpg

http://a2.sphotos.ak.fbcdn.net/hphot...60850870_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphot...81028816_n.jpg

http://a7.sphotos.ak.fbcdn.net/hphot...96712799_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...92002501_n.jpg

http://a3.sphotos.ak.fbcdn.net/hphot...00431156_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphot...84553813_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphot...51652942_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphot...82038988_n.jpg

http://a2.sphotos.ak.fbcdn.net/hphot...44140763_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphot...30511700_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphot...42753994_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...50963834_n.jpg

http://a7.sphotos.ak.fbcdn.net/hphot...12915880_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphot...33549421_n.jpg

http://a3.sphotos.ak.fbcdn.net/hphot...38503547_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphot...18861318_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphot...48167599_n.jpg

http://a7.sphotos.ak.fbcdn.net/hphot...14535652_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphot...05756594_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphot...11869397_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphot...13891878_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphot...44407606_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot...00389502_n.jpg

http://a2.sphotos.ak.fbcdn.net/hphot...22355306_n.jpg

http://a3.sphotos.ak.fbcdn.net/hphot...66425501_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphot...04448243_n.jpg

http://a7.sphotos.ak.fbcdn.net/hphot...79972892_n.jpg

http://www.facebook.com/phoenixautosport

that looks the bollox:agree:

Superb quality mate thanks. All turned up today just the job to put it all back in now.

Leigh.

i have this done in my 5 on the door cards and its a cracking job.

Quote:

---

Originally Posted by dangerous dave

that looks the bollox:agree:

---

cheers :agree:

Quote:

---

Originally Posted by Leigh

Superb quality mate thanks. All turned up today just the job to put it all back in now.

---

glad you like them, any chance you could send me some pics of them fitted, would love to see how it all looks back in the car :)

Quote:

---

Originally Posted by bood

i have this done in my 5 on the door cards and its a cracking job.

---

thanks, glad you like them :)


http://www.facebook.com/phoenixautosport

one of our recent pieces, first a set of pillars with a custom gauge pod fitted and flocked in a custom matched beige to match the roof lining

http://sphotos-a.ak.fbcdn.net/hphoto...95657723_n.jpg

http://sphotos-g.ak.fbcdn.net/hphoto...20303517_n.jpg

http://sphotos-b.ak.fbcdn.net/hphoto...73758681_n.jpg

http://sphotos-e.ak.fbcdn.net/hphoto...00755463_n.jpg

http://sphotos-c.ak.fbcdn.net/hphoto...01555010_n.jpg

http://sphotos-a.ak.fbcdn.net/hphoto...62546636_n.jpg

http://www.facebook.com/phoenixautosport

http://www.facebook.com/phoenixautosport

some celica parts we have had through the workshop this week, flocked in black with selected parts polished

http://sphotos-f.ak.fbcdn.net/hphoto...84972010_n.jpg

http://sphotos-d.ak.fbcdn.net/hphoto...62248566_n.jpg

http://sphotos-a.ak.fbcdn.net/hphoto...88443841_n.jpg

http://sphotos-g.ak.fbcdn.net/hphoto...68285163_n.jpg

http://sphotos-e.ak.fbcdn.net/hphoto...16322797_n.jpg

http://sphotos-c.ak.fbcdn.net/hphoto...74492526_n.jpg

http://sphotos-d.ak.fbcdn.net/hphoto...98615354_n.jpg

http://sphotos-f.ak.fbcdn.net/hphoto...28158601_n.jpg

http://sphotos-c.ak.fbcdn.net/hphoto...74957795_n.jpg

http://sphotos-e.ak.fbcdn.net/hphoto...12352349_n.jpg

http://sphotos-g.ak.fbcdn.net/hphoto...59248419_n.jpg

http://sphotos-a.ak.fbcdn.net/hphoto...97116794_n.jpg

http://sphotos-d.ak.fbcdn.net/hphoto...54586990_n.jpg

http://sphotos-h.ak.fbcdn.net/hphoto...85237352_n.jpg

http://www.facebook.com/phoenixautosport

http://www.facebook.com/phoenixautosport

recent job - some corsa c A-pillars modded to take 52m gauge and flocked in a colour matched beige

http://sphotos-e.ak.fbcdn.net/hphoto...21656341_n.jpg


http://sphotos-f.ak.fbcdn.net/hphoto...60065280_n.jpg


http://sphotos-c.ak.fbcdn.net/hphoto...74031493_n.jpg


http://sphotos-d.ak.fbcdn.net/hphoto...49616116_n.jpg


http://sphotos-g.ak.fbcdn.net/hphoto...79369551_n.jpg

http://www.facebook.com/phoenixautosport

one of our latest jobs a clio mk1 dash top

http://sphotos-c.ak.fbcdn.net/hphoto...37262794_n.jpg

http://sphotos-h.ak.fbcdn.net/hphoto...27026379_n.jpg

http://sphotos-b.ak.fbcdn.net/hphoto...86467782_n.jpg

http://sphotos-e.ak.fbcdn.net/hphoto...70978724_n.jpg

http://sphotos-a.ak.fbcdn.net/hphoto...49640227_n.jpg

http://sphotos-g.ak.fbcdn.net/hphoto...13943391_n.jpg

http://www.facebook.com/phoenixautosport

http://www.facebook.com/phoenixautosport

another recent part a set of clio mk1 A-Pillars with a gauge pod fitted

http://sphotos-g.ak.fbcdn.net/hphoto...19176338_n.jpg

http://sphotos-d.ak.fbcdn.net/hphoto...26729455_n.jpg

http://sphotos-f.ak.fbcdn.net/hphoto...56949604_n.jpg

http://sphotos-c.ak.fbcdn.net/hphoto...45221334_n.jpg

http://sphotos-e.ak.fbcdn.net/hphoto...00013639_n.jpg

http://sphotos-f.ak.fbcdn.net/hphoto...54845407_n.jpg

http://www.facebook.com/phoenixautosport

http://www.facebook.com/phoenixautosport

Mk1 Fiesta Custom Dash And Centre Console

http://sphotos-c.ak.fbcdn.net/hphoto...22650921_n.jpg

http://sphotos-g.ak.fbcdn.net/hphoto...88300471_n.jpg

http://sphotos-e.ak.fbcdn.net/hphoto...81832257_n.jpg

http://sphotos-b.ak.fbcdn.net/hphoto...82816405_n.jpg

http://sphotos-a.ak.fbcdn.net/hphoto...31075171_n.jpg

http://sphotos-h.ak.fbcdn.net/hphoto...32389853_n.jpg

http://sphotos-c.ak.fbcdn.net/hphoto...79579708_n.jpg

http://sphotos-e.ak.fbcdn.net/hphoto...64085738_n.jpg

http://sphotos-g.ak.fbcdn.net/hphoto...16757169_n.jpg

http://sphotos-h.ak.fbcdn.net/hphoto...65600231_n.jpg

http://sphotos-b.ak.fbcdn.net/hphoto...72815517_n.jpg

acid etch primed to ensure good flock adhesion
http://sphotos-f.ak.fbcdn.net/hphoto...74107787_n.jpg

centre console flocked
http://sphotos-e.ak.fbcdn.net/hphoto...15360036_n.jpg

http://sphotos-c.ak.fbcdn.net/hphoto...55978302_n.jpg

dash being prepared different sections at various stages, prepared and etch primed as with centre console, welds all sanded down to uniform radiuses, dash skim filled and sanded back with block to get a high level of finish
http://sphotos-d.ak.fbcdn.net/hphoto...45548642_n.jpg

http://sphotos-b.ak.fbcdn.net/hphoto...82306542_n.jpg

first filling of pods to get basic shape, these were filled and sanded over and over to get the final shaping
http://sphotos-h.ak.fbcdn.net/hphoto...35407047_n.jpg

centre console finished
http://sphotos-f.ak.fbcdn.net/hphoto...42053093_n.jpg

finished dash pics
http://sphotos-d.ak.fbcdn.net/hphoto...22830908_n.jpg

http://sphotos-a.ak.fbcdn.net/hphoto...62490512_n.jpg

http://sphotos-g.ak.fbcdn.net/hphoto...29336271_n.jpg

http://sphotos-e.ak.fbcdn.net/hphoto...82923884_n.jpg

http://sphotos-c.ak.fbcdn.net/hphoto...08956174_n.jpg

http://sphotos-d.ak.fbcdn.net/hphoto...85431651_n.jpg

http://sphotos-a.ak.fbcdn.net/hphoto...61243651_n.jpg

http://sphotos-f.ak.fbcdn.net/hphoto...01445986_n.jpg

http://sphotos-g.ak.fbcdn.net/hphoto...00367814_n.jpg

http://sphotos-c.ak.fbcdn.net/hphoto...50667934_n.jpg

http://sphotos-e.ak.fbcdn.net/hphoto...15962645_n.jpg

http://sphotos-h.ak.fbcdn.net/hphoto...00288003_n.jpg

http://sphotos-b.ak.fbcdn.net/hphoto...93686819_n.jpg

http://sphotos-d.ak.fbcdn.net/hphoto...42646663_n.jpg

http://sphotos-f.ak.fbcdn.net/hphoto...88126506_n.jpg

http://www.facebook.com/phoenixautosport

Hi carl,sent my cards out to you yesterday,hopefully the other wont be far behind.thanks

another mk1 fiesta modified dash done, here are a couple of images, click on the link to my facebook page to see them all :cool!:

http://www.facebook.com/phoenixautosport

http://sphotos-d.ak.fbcdn.net/hphoto...92492092_n.jpg

http://sphotos-f.ak.fbcdn.net/hphoto...50726633_n.jpg

http://sphotos-e.ak.fbcdn.net/hphoto...29504465_n.jpg

http://www.facebook.com/phoenixautosport