Re: Finally got my mits on a 5 again
How have I missed your thread?! :dearme: Great project you've got going here Matty. Unfortunately my works computer can no longer see your most recent pictures (they're too tight to update the browsers!) I'll have to check on my phone or laptop.
Keep up the good work for now! :agree:
Re: Finally got my mits on a 5 again
Thanks Alex, I have set aside the whole week to get the bodywork done and get it off to paint, need the space in my workshop, and I have lots of plans for the engine bay which is going to take some time to make. More progress today, the passenger wheel arch is too rotten, so I converted a Campus wing into GTT, it took soem time getting the holes in the correct place, but it all fits nicely now.
http://i245.photobucket.com/albums/g...psaw492pnn.jpg
Boot need some repairs to the bump stops also.
http://i245.photobucket.com/albums/g...ps46hwhekg.jpg
One side nearly done, just the hole to still and some filler work.
http://i245.photobucket.com/albums/g...psd6atsf9v.jpg
http://i245.photobucket.com/albums/g...psbgrurm3g.jpg
http://i245.photobucket.com/albums/g...pso6xbfbp1.jpg
Re: Finally got my mits on a 5 again
A bit more progress today. B post all finished off.
http://i245.photobucket.com/albums/g...ps6fwko1qy.jpg
Another crusty panel that had to go, so made a complete new one. I'm not sure exactly not I looked before it rotted away, but the replacement fills the gap nicely.
http://i245.photobucket.com/albums/g...pspg4wwxvd.jpg
http://i245.photobucket.com/albums/g...ps49za5jun.jpg
And this arrived today. :D looks to be a nice fit, just need to make some custom bottom bumper brackets up.
http://i245.photobucket.com/albums/g...psaqjrakru.jpg
Re: Finally got my mits on a 5 again
Re: Finally got my mits on a 5 again
Nicely done mate, good work! :agree::)
Re: Finally got my mits on a 5 again
Thanks, it's getting there! I can get on with the fun part now of making all the engine bay parts.
The to do list:
Make air duct for FMIC to seal against bumper
Finish ram air duct for filter
Tubular manifold (still deciding whether to go external wastegate or not?)
Fabricated rocker cover
Fabricate new header tank
Some more parts arrived today, and had a little oley to check it all fits...does just! The plan is to make a sealed duct against the grill, and create slight positive pressure at the turbo inlet (power for nothing after all).
http://i245.photobucket.com/albums/g...psqgsasote.jpg
http://i245.photobucket.com/albums/g...psot5l1akl.jpg
http://i245.photobucket.com/albums/g...pswb0pdntv.jpg
Re: Finally got my mits on a 5 again
Looks good mate
You gone green hoses too? Same colour as mine! :D
Re: Finally got my mits on a 5 again
He Yep, it's not OE in the engine bay anymore so I thought I may aswell make it stand out! :laugh:
It all looks a bit Heath Robinson at the moment, but it will all come together when I get everything fully fitted.
Re: Finally got my mits on a 5 again
I was hoping the engine would be ok, but after stripping the ancillaries off to give it a coat of paint, my engine building instincts took over and I gave the crank a push and pull....needs to come apart!
It doesn't look too bad, just the mains need a regrind, fresh set of rings and bearings, then it can go back together. Combustion chambers are a very nice colour after 20k since the last build so that's encouraging.
The plan is to fit a 285 cam while its aparts and get the sumo,rocker cover, timing cover etc... All powder coated black. Others parts are currently off being plated.
By the sound of things the shell won't be back until mid April, so that doesn't give me long before retro show. Trying to get all the sub assemblies ready for a production line type assembly. :laugh:
http://i245.photobucket.com/albums/g...pst9xw1ta3.jpg
Re: Finally got my mits on a 5 again
Well the shell is now in primer, so I hope to get this back at the end of the month. Which means I need to pull my finger out to get the car back together! The crank is back after a regrind on the mains and polish on the BE, block thoroughly cleaned and painted, then more cleaning on the engine components. I light deglaze on the bores made them ready for new rings.
Just waiting for the zinc plated parts to come back now.
Lots of new parts.
http://i245.photobucket.com/albums/g...psu5jld7t3.jpg
Engine block cleaned.
http://i245.photobucket.com/albums/g...ps53e9cmav.jpg
http://i245.photobucket.com/albums/g...psqo6gm329.jpg
Fresh regrind!
http://i245.photobucket.com/albums/g...psl887fjga.jpg
A bit cleaner now!
http://i245.photobucket.com/albums/g...psotnedhaj.jpg
All clean, I think the timing sprocket got damaged during the regrind, luckily I had a spare.
http://i245.photobucket.com/albums/g...pspxwftrbd.jpg
Head cleaned up, and new valve springs fitted and exhaust stud helicoiled.
http://i245.photobucket.com/albums/g...pszw28ljjy.jpg
Some parts back from powder coating.
http://i245.photobucket.com/albums/g...ps6i0js63u.jpg
http://i245.photobucket.com/albums/g...pspockmqr1.jpg
Re: Finally got my mits on a 5 again
Re: Finally got my mits on a 5 again
Paint is looking very good! :smokin:
Re: Finally got my mits on a 5 again
Can't wait to see this!!!:D
Re: Finally got my mits on a 5 again
Cheers. I think I'm on course for retro show. First start up this week. Collected doors and filler cap yesterday...more pics to come.
Re: Finally got my mits on a 5 again
Will get some better pics next week when it stops raining! :crap:
Windows in with new seals.
http://i245.photobucket.com/albums/g...psvwnmii99.jpg
Started getting the panels aligned on the back end.
http://i245.photobucket.com/albums/g...pstkiokoda.jpg
Doors on, just got to fit the internals now, then onto repairing my wastegate on my turbo then finishing the engine off ready for startup!
http://i245.photobucket.com/albums/g...psfghsq02u.jpg