Yeah I know little Daz. We'll have to meet up when we're on the road, if not before
Printable View
Yeah I know little Daz. We'll have to meet up when we're on the road, if not before
Great work mate, you really have been cracking on with this! love the subframe :cool:. Would recommend checking oil pump over & rebuilding carb before giving it some beans :agree: :).
Fair do's, C1J for what they are aint at all bad, heart & soul of a 5GTT ;).
Get C1J back in. set up for a bar of boost and see how you get on. Can always up it abit more with fuelling set to match. Blue Courteco headgasket with 12.9 headbolts is a must ;) :agree:
Car is coming on real good, keep up the good work mate.
Hi All.
Haven't done too much on this as of late. I had an accident at work and crushed one of my fingers.
So as you may know my plan was a full rewire using all new connectors, that has gone out the window and i have just been soldering on to the old cables. two main reasons for this 1 being money, if i were to do it totally i would have to buy LOTS of different coloured cables with the traces on etc. this way i can use any old colour as at least the ends are the correct colour. second reason... eventually im going to be changing alot of it again and i will be using aftermarket speedo and rpm etc so wont even be using the connectors. Its all money though and i have ploughed a fare few grand in to it the last few months and need to start putting more aside for the bambino.
Anyway.
Started doing the brake lines so i can start to think about getting the engine in.
http://i739.photobucket.com/albums/x...ps1wcnuxiq.jpg
Rear bias is just there for something to aim at. i will be getting a second hand one of these and cleaning it up. same with rear shocks, they will be cleaned eventually.
http://i739.photobucket.com/albums/x...psf6g9uaih.jpg
http://i739.photobucket.com/albums/x...ps88frz2jl.jpg
http://i739.photobucket.com/albums/x...pskxmn55py.jpg
Then started cleaning gearbox. probably took me 4 days so far and still not done :cry:
http://i739.photobucket.com/albums/x...psxdbgjk77.jpg
http://i739.photobucket.com/albums/x...psyew1plne.jpg
http://i739.photobucket.com/albums/x...psmvlltnvb.jpg
Then started wiring up the instrument panel and switches..
http://i739.photobucket.com/albums/x...psu8qw0loh.jpg
http://i739.photobucket.com/albums/x...psdxjhlcph.jpg
Started cleaning/painting general engine bay pieces/brackets..
http://i739.photobucket.com/albums/x...psqgkuiveh.jpg
http://i739.photobucket.com/albums/x...ps8kjptrrz.jpg
I have done more than that but the only pics i have. Doesn't look too bad but the metal is badly pitted so a fare few imperfections but im not trying to build a show car, just want it clean. Lastly i single handed got my engine on the stand ready for resealing sump etc and for a paint up..
http://i739.photobucket.com/albums/x...pszty89q5e.jpg
http://i739.photobucket.com/albums/x...pspvvcxim6.jpg
http://i739.photobucket.com/albums/x...pshhysqqcn.jpg
http://i739.photobucket.com/albums/x...psu7yksacb.jpg
Got a couple of weeks of in a couple of weeks so hoping to get quite abit done, plus my finger is starting to get better..
:agree:
Looking good :)
Thanks Trev. its getting there.
Latest progress pictures.
Took the sump off to check everything i have reciepts for is there and all looks good :agree:
http://i739.photobucket.com/albums/x...pso5dhvz8n.jpg
http://i739.photobucket.com/albums/x...ps2v7nenem.jpg
Wasnt expecting to be greeted by this, but no complaints!
Baffled sump.
http://i739.photobucket.com/albums/x...ps6pf3lvqu.jpg
Engine painted and sump and bracketry etc.
http://i739.photobucket.com/albums/x...psfqkvrfqd.jpg
http://i739.photobucket.com/albums/x...psggdw7jqr.jpg
Mated to gearbox
http://i739.photobucket.com/albums/x...psklrlywoo.jpg
http://i739.photobucket.com/albums/x...ps0vtnak7y.jpg
http://i739.photobucket.com/albums/x...psgpcavezm.jpg
And then touchdown..
http://i739.photobucket.com/albums/x...psfo9sbssi.jpg
http://i739.photobucket.com/albums/x...pstobrtbac.jpg
Started Mocking things up. most of its loose as i havent got the right bolts yet, i need to make a trip to a local bolt supplier next week sometime and start getting things bolted in permanently..
http://i739.photobucket.com/albums/x...pshwwbz9bc.jpg
http://i739.photobucket.com/albums/x...psq9swbgyn.jpg
http://i739.photobucket.com/albums/x...psyoyjwcww.jpg
Then made a start on the wiring
http://i739.photobucket.com/albums/x...pswigqxwo2.jpg
http://i739.photobucket.com/albums/x...pswf4cws39.jpg
http://i739.photobucket.com/albums/x...psc63fmufn.jpg
http://i739.photobucket.com/albums/x...psejaaj8hr.jpg
http://i739.photobucket.com/albums/x...psk3h9g0gd.jpg
ribbed pulley waterpump. Notice i have put some carbon fibre 4d vinyl on the turret, this is purely because of the dreaded brake reservoir, i am hoping it will help protect it a little.
http://i739.photobucket.com/albums/x...psyjyoccih.jpg
http://i739.photobucket.com/albums/x...ps5erfpc5b.jpg
And this is how it is as of the end of today.
http://i739.photobucket.com/albums/x...psxbqalaxa.jpg
will be getting some new bolts Tuesday so will start getting driveshafts in and everything bolted tight.
Thanks for looking.
I'm loving that purple great choice mate 👍👍👍
Thanks Phil :agree:
Looking very good! :agree: :cool:
Wow, big updates, looking really well :agree:
not much to update but a few pictures of what I have been up to. Bit annoying really as ive tried to do a job and realise i need little bits or run out of jubilles or something soft. I have got loads of little jobs started but jack all finished :dearme:
http://i739.photobucket.com/albums/x...psofeeiejk.jpg
http://i739.photobucket.com/albums/x...pslfvktphl.jpg
http://i739.photobucket.com/albums/x...pspsjap3fz.jpg
http://i739.photobucket.com/albums/x...ps3vurofgg.jpg
http://i739.photobucket.com/albums/x...ps8gvroogr.jpg
http://i739.photobucket.com/albums/x...psbenkujbj.jpg
http://i739.photobucket.com/albums/x...psigiqidee.jpg
http://i739.photobucket.com/albums/x...psc7dtbdjz.jpg
http://i739.photobucket.com/albums/x...psolanjrov.jpg
http://i739.photobucket.com/albums/x...pspg2yeojq.jpg
Going to try and get the engine bay complete before the next update.
Have decided against the charge cooler and currently sat next to my shiny new front mount. if i cant mount in the grille area think ill have to chop the cross member..
can anybody help me out on turbo watercooling if im not running the inlet water pipes.. do I just run from the turbo straight back to the waterpump? so there will be two pipes coming off the waterpump going straight to the turbo, does this sound correct?
Thanks for looking
not much to update but a few pics of what I have been up to the last couple of weeks.
fitted a front mount and relocated oil cooler.
Please note, the intercooler was not straight when i took this picture but is more straight now..
http://i739.photobucket.com/albums/x...ps23jbmjmb.jpg
http://i739.photobucket.com/albums/x...psbomicjgz.jpg
Ordered my airfilter and its not the one i wanted so got to buy another :(
http://i739.photobucket.com/albums/x...ps7vmzlheh.jpg
http://i739.photobucket.com/albums/x...pso5zjf6wr.jpg
And then my first time mig welding on something other than the tin can of a car. im reasonably happy with it, there is one spot where i just randomly welded well off where it needed to be :laugh:
http://i739.photobucket.com/albums/x...pskvmmnmjg.jpg
http://i739.photobucket.com/albums/x...psr3qnbni5.jpg
http://i739.photobucket.com/albums/x...psx7r7rpdx.jpg
And now i have started the rewire and that is well underway with only 6-7 circuits left to do..
http://i739.photobucket.com/albums/x...psce8grhjh.jpg
cheeky random pic..
http://i739.photobucket.com/albums/x...psvmsnvojo.jpg
http://i739.photobucket.com/albums/x...psr0yl9y82.jpg
low beam
http://i739.photobucket.com/albums/x...ps1vlqgi7f.jpg
high beam
http://i739.photobucket.com/albums/x...ps3n5d72tl.jpg
new fuseboard layout..
http://i739.photobucket.com/albums/x...pse7digiep.jpg
few more circuits in
http://i739.photobucket.com/albums/x...psbld3bjk1.jpg
http://i739.photobucket.com/albums/x...psphfgiuhx.jpg
http://i739.photobucket.com/albums/x...psetqne8yd.jpg
http://i739.photobucket.com/albums/x...pslmcw9si7.jpg
http://i739.photobucket.com/albums/x...pszb60noq3.jpg
http://i739.photobucket.com/albums/x...psd2o3rliw.jpg
Its all messy at the minute, I am not prepared to do it neat until I know its all working how I want it to and until i have fettled about alot more. so please excuse the birds nest.
anyway thats where im at with it.
next jobs are to get the exhaust on, fit drive shaft roll pin and clean and fit the rear brakes. the wiring will take a back seat for abit as i need more parts but would rather do a few other jobs to see if i come across any other parts i need then make one last order hopefully.
thanks.
New poster! (less than 10 posts)
Boi you done good!! Nice job:cool:
Well, chaps.
I fear this car is never going to see the light of day in my ownership.
our little boy has arrived safely into the world and parenthood is more time consuming than i ever imagined.
I am mostly considering breaking it for parts at the minute but not rushing into any major decisions just yet. My Mrs has been pretty poorly after a non straight forward birth so i will see if i get much more time when she is back on her feet properly and able to drive etc.
last thing i managed to do was get my strutbrace on and complete more wiring which is about 80% complete now.
Oh, and i had it running ;) sounds mint, massively overfuelling at the minute but believe that to be down to having a non standard main jet and adjustable fuel reg.
will leave you with the last two pictures i took of the car and the last time i seen it :laugh:
hopefully my next post will be progress and not a breaking for parts post...
http://i739.photobucket.com/albums/x...psimsnmyxf.jpg
http://i739.photobucket.com/albums/x...psrqee80kc.jpg
cheers.
James dont break her, shes almost done perservere:agree: it will be worth the wait.;)
i dont want to mate believe me. but rather that than it sit there untouched for years. Will see how it goes.
:agree:
Look at it, all the hard work. Think back to all you have done to get it how you want, you will get the itch again and all that will need to be redone if you break or sell it. Also as time goes by it is not going to get any easier to source good cars and parts. I think you would be crazy to make that decision now, obviously your prioritiies are with the family at the moment but just take a while till things calm down a little. Fling a cover over it till the urge returns.
Leave it, unless times get dire and you find your self like me unable to pay the mortgage one month due to health, then needs must. But all the time it's sat not costing to look at, see it as your reward on a day that the kids have been horrid you can escape to enjoy it. Even if you sit inside it just to get that smell of old Renault and petrol and drink a tea. It will keep you happy and positive.
Thanks for your comments and vote of confidence. As I said, I most definitely will not be rushing into any decisions and will try and get the time to plod on with her. The only way I see it is if its sat there untouched its a massive waste when somebody else with the time could be enjoying it.
I need to have a chat with the Mrs nan and see what her thoughts are on the car being in her garage longer as it was only supposed to be a short term thing.
Bud you know my deal with my daughter. Close the door leave it shut think of family the car will always be there and when things calm down.. Get back toit. Even the way things are in my life I need that bit of man time with the motor and it's cheaper than a shrink. :laugh: it's hard at first then a breeze once your broke into fatherhood.. It dose get easier honest. :agree:
To be honest Paul that does make alot of sense. I do/ will need theboccasional escape. Right, im off to buy flowers for my Mrs nan... :laugh:
This project has come such a long way mate, some excellent progress, its not gonna cost you with it sitting there for a bit while you adjust to life with a baby. When I had my little girl nearly 5 years ago now some of my mates said 'you'll have to get rid of all your performance cars' anyways I hung onto them, if anything having less time has made me even more determined to make time when possible to fix, tinker and drive the 5 and wouldnt change it for the world. :agree: :)
well....
I have updates! small updates but updates non the less.
pretty much finished the wiring now, few more things to add but the main is done with.
Will let the pictures do the talking..
Painted my campus grill and lights..
http://i739.photobucket.com/albums/x...psdt9pgkae.jpg
http://i739.photobucket.com/albums/x...ps56ftbzat.jpg
The wiring mid wrap, was all tidied up and wrapped in tape in certain places for protection.
http://i739.photobucket.com/albums/x...psjyzlnaxc.jpg
Dash in..
http://i739.photobucket.com/albums/x...pspe84gsxi.jpg
and a few randoms,
http://i739.photobucket.com/albums/x...pswn95bfqa.jpg
http://i739.photobucket.com/albums/x...pspq58wxzp.jpg
http://i739.photobucket.com/albums/x...psaacbltrw.jpg
Then i set about cleaning my carpet.
before..
http://i739.photobucket.com/albums/x...ps9xfhgkq4.jpg
http://i739.photobucket.com/albums/x...ps7v3hrsup.jpg
After
http://i739.photobucket.com/albums/x...pseihllucc.jpg
http://i739.photobucket.com/albums/x...ps1j662tet.jpg
http://i739.photobucket.com/albums/x...psgkqqdg89.jpg
And a few more randoms,
http://i739.photobucket.com/albums/x...psnvprfypc.jpg
http://i739.photobucket.com/albums/x...ps81d0umr7.jpg
Thanks for looking!
Lovin' the project. I have a love/hate relationships with electrics. Can be very frustrating finding faults, but it's very rewarding when it all comes good. :)
Thanks for the kind comment. Yes, the wiring in these things originally is abit of a nightmare to get your head round and that is why i have re done mine. i have alot more cables in it now but every circuit is simplified and if the fuse for my stereo goes i wont loose my headlights :laugh:
good work jamie. I would love to have a look at this beast in the flesh. Hope you and the family are all good
Great work mate, has made some excellent progress in the last few weeks since lil'un arrived, looking forward to the next update! :agree: :cool:
Cracking build thread,can't wait to see it finished.
lovin this! top marks chap .looks the dogs danglys:agree:
Chaps, In between washing bottles, changing nappies and being the proudest dad in the world.. I have managed a few hours on the 5. Can see a flickering candle at the end of the tunnel now...
Started off stripping the paint on my roll cage ready for repaint, that is 8 hours of my life i will never get back :sad2:
Not sure if i mentioned this previously but because of my refusal to get my sunroof out and plate the hole up the cage did not fit, I have had to chop a small amount off the bottom of the cage and weld some new, thicker mounting plates and also a little bit of brute force to get it how i want.
The thicker plates i am using..
http://i739.photobucket.com/albums/x...psetfecyiq.jpg
mid paint strip
http://i739.photobucket.com/albums/x...pszq25aci8.jpg
All painted in the very "airy" spray booth ;)
http://i739.photobucket.com/albums/x...psgnvcjter.jpg
And in with some fresh OMP stickers..
http://i739.photobucket.com/albums/x...pscijvmkqj.jpg
I still have not bolted it in yet but at least i was able to fit my seats..
http://i739.photobucket.com/albums/x...psv9ak8kzg.jpg
http://i739.photobucket.com/albums/x...psizp8hhtg.jpg
And thats about it, i have now fitted my rear brakes, just need to finish off the plumbing. hoping tomorrow to get my campus filler neck on and maybe a few other small jobs.
Did use my company phone that has a slightly better camera to get some randoms as most of the pics on this thread are terrible :laugh:
http://i739.photobucket.com/albums/x...pstdgro2uf.jpg
http://i739.photobucket.com/albums/x...ps32lf543h.jpg
http://i739.photobucket.com/albums/x...psruvh2dh2.jpg
http://i739.photobucket.com/albums/x...ps74k3pcgj.jpg
http://i739.photobucket.com/albums/x...psxo2wo0le.jpg
Thanks for looking :agree:
Not too far to go now :agree:
Bodywork next to get it ready for paint. The bit im going to struggle with :cry:
Excellent work you have been doing, a very inspiring project...... and you are almost there :D
Hats off to you for the rewire - I cant imagine many people wanting to take that on :eek:
Do you happen to know the dimensions of your cooler? Looks a good balance between big and not having to chop all of the cross member out
Thanks for the kind words. I think a rewire is the only way to go on these. I admit i know have a lot more wiring than standard, but if my interior light fuse blows i don't loose my fog light or something soft. It has been wired for function and ease of use really.
Cooler is 550x230x65mm But please note, because of the way i have cut the cross member my bumper does NOT fit without cutting a hole out.
Thanks.
A great thread mate. Very handy for my project.
Could do with an update.;)