-
Re: my f7p turbo conversion 2012 upgrades
Quote:
Originally Posted by
turbo ted
new engine spec
williams head bigger inlet valves and ported inlets,standard exhaust valves and slightly lower compression than before, they're the only differences and its making extra power.
Still on pump fuel Shell Vpower and a pint of octane booster :D
and yes it will be at the renault turbo festival.
Which brand of octane boost do you use ted?
Top work though, awesome numbers can't wait to see it!
-
1 Attachment(s)
Re: my f7p turbo conversion 2012 upgrades
-
Re: my f7p turbo conversion 2012 upgrades
Paddy spec tuning. Well done shamus :)
-
Re: my f7p turbo conversion 2012 upgrades
nice work teddy man
as said, i'm loving the use of the JC5 and intruiged to see how much more she'll take! :cool:
-
5 Attachment(s)
Re: my f7p turbo conversion 2012 upgrades
small update more upgrades at the end of 2012 for next year season 2013,
new engine bay bulk head moved back for more space in engine bay around manifold,
vw gearbox conversion under construction new parts from america have arrived new clutch,arp bolts,lsd,front mount so no more waiting around time to crack on with the build thats all for now more updates soon pictures below,
-
Re: my f7p turbo conversion 2012 upgrades
Good stuff ted keep it going mate looking forward to some more progress and pictures :agree:
-
Re: my f7p turbo conversion 2012 upgrades
Are you racing next year ? Esc?
-
Re: my f7p turbo conversion 2012 upgrades
Good to see the parts arriving, look forward to seeing this next year
-
Re: my f7p turbo conversion 2012 upgrades
-
Re: my f7p turbo conversion 2012 upgrades
Robbie as always top work looking forward to seeing this again:agree: :burnrubber:
-
Re: my f7p turbo conversion 2012 upgrades
a colossal job on this car!!
bravo, good courage afterwards.:agree:
-
Re: my f7p turbo conversion 2012 upgrades
:cool: looking good, are you running the peloquin diff by any chance;)
was going to fit one, but need to get use to the car with an open diff first:laugh::laugh:
are you running split gears from different boxes or have you stuck with a single type, erf,drw etc.
was going to get that clutch myself, but was informed that the oxide granules on the friction plate would'nt last more than 4000 miles, they built me a 4+ build, which is basicly the full cerametalic ring with solid centre. figured out cheaper than the stage 3+ also:D
used the uprated engine mounts on all corners, on mine and to be honnest it does'nt move one bit(piccys in project thread)
my only conern is the outer hubs splines shearing of, which will mean fitting bigger hubs etc cant remember if you fitted the 172 items:scratch: either way great work rob ,bet you cant wait to get it going again, 9,s this year maybe:D, might need a bigger turbo though;)
-
Re: my f7p turbo conversion 2012 upgrades
Andy it's the CVs that fail before the splines. 172 CV's and hubs are much stronger.
-
Re: my f7p turbo conversion 2012 upgrades
Quote:
Originally Posted by
Scoff
Andy it's the CVs that fail before the splines. 172 CV's and hubs are much stronger.
its on my list to do, cheers chris. had alreadt built up the driveshafts:homer::homer: just out of interest, is there anything else thats bigger/ stronger say scenic or espace that will work?
-
Re: my f7p turbo conversion 2012 upgrades
Quote:
Originally Posted by
HAndy
its on my list to do, cheers chris. had alreadt built up the driveshafts:homer::homer: just out of interest, is there anything else thats bigger/ stronger say scenic or espace that will work?
I looked at a few andy, I think most of the newer renault use the same spline and CV as 172 so it was just as easy to use those. Some of the old bigger renaults used the bigger spline too but 172 CV's looked best to me. I had no more trouble after I swapped to those.
-
Re: my f7p turbo conversion 2012 upgrades
cheers chris, hows your 5 doing, have you had anytime yet for the upgrades,cough,cough turbo:D
-
Re: my f7p turbo conversion 2012 upgrades
Quote:
Originally Posted by
HAndy
:cool: looking good, are you running the peloquin diff by any chance;)
was going to fit one, but need to get use to the car with an open diff first:laugh::laugh:
are you running split gears from different boxes or have you stuck with a single type, erf,drw etc.
was going to get that clutch myself, but was informed that the oxide granules on the friction plate would'nt last more than 4000 miles, they built me a 4+ build, which is basicly the full cerametalic ring with solid centre. figured out cheaper than the stage 3+ also:D
used the uprated engine mounts on all corners, on mine and to be honnest it does'nt move one bit(piccys in project thread)
my only conern is the outer hubs splines shearing of, which will mean fitting bigger hubs etc cant remember if you fitted the 172 items:scratch: either way great work rob ,bet you cant wait to get it going again, 9,s this year maybe:D, might need a bigger turbo though;)
hi andrew the diff im using is a cheap version of the peloquin here's the link
http://www.ebay.co.uk/itm/1609005340...84.m1497.l2648
scoff has used this diff so i know it works:)using petrol gears in the drw box clutch wise if it only lasts up to 4000miles in that time should do me for 4 years or 4 launches at pod:devil:running 172 hubs already so shafts should be sorted, as for a bigger turbo no but maybe a twin stroll exhaust housing and more boost :D
-
Re: my f7p turbo conversion 2012 upgrades
Quote:
Originally Posted by
HAndy
cheers chris, hows your 5 doing, have you had anytime yet for the upgrades,cough,cough turbo:D
Yes andy its getting there. I've bitten off more than I can chew this winter, there's a lot going on with it. It's away having a national chassis cage done then it's off for paint and wrap while I build a new motor and gearbox.
Robbie, looking good :)
-
Re: my f7p turbo conversion 2012 upgrades
Quote:
Originally Posted by
turbo ted
hi andrew the diff im using is a cheap version of the peloquin here's the link
http://www.ebay.co.uk/itm/1609005340...84.m1497.l2648
scoff has used this diff so i know it works:)using petrol gears in the drw box clutch wise if it only lasts up to 4000miles in that time should do me for 4 years or 4 launches at pod:devil:running 172 hubs already so shafts should be sorted, as for a bigger turbo no but maybe a twin stroll exhaust housing and more boost :D
oohh twin scroll!! be nice to see if it helps spool up:cooter:
sounds like your sorted then:D iwill prob break my shafts next year:laugh::laugh:
oh well , might have a play with the gears when that happens:ashamed:
-
Re: my f7p turbo conversion 2012 upgrades
Quote:
Originally Posted by
Scoff
Yes andy its getting there. I've bitten off more than I can chew this winter, there's a lot going on with it. It's away having a national chassis cage done then it's off for paint and wrap while I build a new motor and gearbox.
Robbie, looking good :)
are you going sequential by any chance?:D
-
Re: my f7p turbo conversion 2012 upgrades
No Andy, sticking with H pattern :)
-
Re: my f7p turbo conversion 2012 upgrades
Those Obx items seem to do the job good after a debur, replacement of the ****ty springs and correct tightening of the bolts.
Twin scroll is a good step forward too, although for pod i don't really think it's necessary.
However you're making good progress! Did the jc5 break in the end?
-
2 Attachment(s)
Re: my f7p turbo conversion 2012 upgrades
Quote:
Originally Posted by
Tutuur
Those Obx items seem to do the job good after a debur, replacement of the ****ty springs and correct tightening of the bolts.
Twin scroll is a good step forward too, although for pod i don't really think it's necessary.
However you're making good progress! Did the jc5 break in the end?
jc5 gearbox broke the planetary and sun gear in the diff theres no way of upgrading that pictures below you can see the sun gear twisted off and stuck in the end of the driveshaft.
-
Re: my f7p turbo conversion 2012 upgrades
I bet as a child you used to break steel balls :laugh:
-
5 Attachment(s)
Re: my f7p turbo conversion 2012 upgrades
small update
engine mounts now done and all mounted on subframe as i didn't want to mount the gearbox on the chassie leg so i made frame over the gearbox and made a new mount position on the back of the subframe.
doing a power steering conversion aswell managed to fit a clio williams rack its tight but it fits:). also mounted the turbo in its new postion and made a new 3'' downpipe, manifold to do next i will leave that one to my fabricator which will be done over the christmas break.
thats all for now pictures below.
-
Re: my f7p turbo conversion 2012 upgrades
Looks the nuts rob well impressive mate :agree:
-
Re: my f7p turbo conversion 2012 upgrades
looking great Rob, you back at work now?
-
Re: my f7p turbo conversion 2012 upgrades
Robbie that is looking very impressive :agree::agree:
-
Re: my f7p turbo conversion 2012 upgrades
Looking good Robbie, but power steering :scratch: you getting a bit old & frail... :cooter:
-
Re: my f7p turbo conversion 2012 upgrades
-
Re: my f7p turbo conversion 2012 upgrades
Looks like nice setup there. Are completely replacing the exhaust manifold or just reworking the old item?
-
5 Attachment(s)
Re: my f7p turbo conversion 2012 upgrades
hi everyone
the reason for power steering f7 lumps are heavy and now its going to be alot heavier with the vag box and i only have 300mm steering wheel,power steering will be ran off a electric pump so i won't lose any bhp:D,ollie the manifold is a complete new build and mr reed has bought the old one, new flywheel turned up today complements of scoff of efi parts and my new clutch from the states fits like a glove, fitted a mini master cylinder for my hydro clutch more pics added below robbie.
-
Re: my f7p turbo conversion 2012 upgrades
Looking very nice mate :agree:
What are the engine mounts off? Are they easily available?
-
Re: my f7p turbo conversion 2012 upgrades
Quote:
Originally Posted by
turbo ted
hi everyone
the reason for power steering f7 lumps are heavy and now its going to be alot heavier with the vag box and i only have 300mm steering wheel,power steering will be ran off a electric pump so i won't lose any bhp:D,ollie the manifold is a complete new build and mr reed has bought the old one, new flywheel turned up today complements of scoff of efi parts and my new clutch from the states fits like a glove, fitted a mini master cylinder for my hydro clutch more pics added below robbie.
Bugger :( was hoping it was for sale
-
Re: my f7p turbo conversion 2012 upgrades
Spot on Ted, looks amazing !! :agree::)
-
Re: my f7p turbo conversion 2012 upgrades
Quote:
Originally Posted by
Ashy
Looking very nice mate :agree:
What are the engine mounts off? Are they easily available?
hi ashy there just rover v8 mounts i mod them do by cutting the thread stud off and drill through them so i can fit bolt through them and tighten them right down as i've had them v8 mounts snap apart before;)
-
Re: my f7p turbo conversion 2012 upgrades
All coming together now mate.. i was only pulling your leg about the power steering :D
Gonna be a beast once its finished thats for sure.
-
Re: my f7p turbo conversion 2012 upgrades
https://www.rtoc.org/boards/attachmen...5&d=1354746723
holy **** Rob!!!! are you expecting something to twist:eek::eek::eek:
the cast alloy casing will break around the bolt holes before anything else, i thought mine where solid(could shift them with two of us pulling on the engine/subframe:laugh::laugh:
looking good though, how much does it weigh now? mine was 915kg before:laugh::laugh:
-
Re: my f7p turbo conversion 2012 upgrades
Quote:
Originally Posted by
turbo ted
Was this the orignal inlet with the end cut off then the plate and 120mm tube welded on? Looks exllent! :agree:
-
Re: my f7p turbo conversion 2012 upgrades
hi mate
its the original flange and runners cut off the standard manifold the rest i made by hand alot drilling and filing out the 4 holes on flat plate to match the original runners then 120mm diameter tube cut with a slot to the size of the flat plate welded to flat plate and end caps to match.
-
Re: my f7p turbo conversion 2012 upgrades
Is that all? :laugh: Fancy making another in a few months time? :D :cool:
-
2 Attachment(s)
Re: my f7p turbo conversion 2012 upgrades
make me an offer on that one and i will make another one;)
-
Re: my f7p turbo conversion 2012 upgrades
Temping... I'm in no rush at the moment, but if it was going at a bargain then who knows. :cool:
-
5 Attachment(s)
Re: my f7p turbo conversion 2012 upgrades
update new exhaust manifold pictures below
-
Re: my f7p turbo conversion 2012 upgrades
That was quick, what's his work like?
It looks good.
-
Re: my f7p turbo conversion 2012 upgrades
Looking great rob how long till its all done and running full boost again mate
-
Re: my f7p turbo conversion 2012 upgrades
this manifold has bigger diameter tube and longer runners===more boost:smokin:
-
Re: my f7p turbo conversion 2012 upgrades
Looks really good Rob :smokin:
-
Re: my f7p turbo conversion 2012 upgrades
-
Re: my f7p turbo conversion 2012 upgrades
heres a link of fabricator facebook page who made the manifold
http://www.facebook.com/#!/Edwardsmotorsport37?fref=ts