My 5GTT efi.

First post!

Hello, i present my project 5GTT ph2, year 1985 white 389.

Engine

- piston Wössner
- FGS800 shirt
- 314 cat cams camshafts
- Dump Bonalume
- Inoxline exhaust manifold
- Intake manifold injected R5GTT
- Megasquirt ECU, sequential injection, ignition coil jumostatique, Map 0/43 psi, launch control and flat shift
- Walbro fuel pump
- rev limiter 7200
- ratio of 8.0 / 1
- down pipe KTR 2 "1/2 (63mm)
- exhaust system KTR 2"1/2 (63mm)
- T25/T28 Hybrid turbo
- Intercoller forge
- 13 oil ranges
- S5 radiator diesel

Turbo type

-T25/T28

Boost Pressure (@ manifold)

-20psi

Transmission

- JB3032

Wheels

- 15" Compomotive Gr.A

Suspension Details

Front:
- Viarouge
- Apex -45mm
- 20mm spacers

Rear:
- Viarouge
- Clio 16V rear-wheel axle unit

Brakes

- Pug 406 V6 23,8mm master cilinder
- Brake caliper Brembo, front disc 280 clio rs.

Interior

- Sparco seats
- Multipoint cage hoops

photograph here :

http://img4.hostingpics.net/pics/722...1433bisuz5.jpg

http://img4.hostingpics.net/pics/468...1465bisck3.jpg

http://img4.hostingpics.net/pics/864649photo217gc6.jpg

Multipoint cage hoops :

http://img4.hostingpics.net/pics/612...1528bisal0.jpg

front :

http://img4.hostingpics.net/pics/218967pfhoto004em9.jpg

Inside :

http://img4.hostingpics.net/pics/203652photo120jf4.jpg

Engine :

http://img4.hostingpics.net/pics/423322104zs006.jpg

connecting rods and pistons Wossner :

http://img4.hostingpics.net/pics/707...nbielle009.jpg

CAMSHAFTS Cat cams 314, SPRINGS, PULLEYS KITS

http://img4.hostingpics.net/pics/879979photo002op3.jpg

Inlet manifold efi :

http://img4.hostingpics.net/pics/479107photo232tt1.jpg

T25/T28 :

http://img4.hostingpics.net/pics/868118t25t39.jpg

Engine :

http://img11.hostingpics.net/pics/153863gtjef015.jpg

The cars :

http://img11.hostingpics.net/pics/223547GtJeff034b.jpg

http://img11.hostingpics.net/pics/115334GtJeff030b.jpg

http://img11.hostingpics.net/pics/511076GtJeff024.jpg

;)

Nice car and welcome to the club:) Did the cage get installed in one piece?

New poster! (less than 10 posts)

Thank you.

This is a cage hoops sections to several parties, realized by me.

http://img84.imageshack.us/img84/1737/photo359gm9.jpg

welcome good to see another efi r5. great pic's as well

Very Nice :agree:

Oooh la la - impressionnant!

Lovely... :agree:

wow awesome project! needs more detailed pics:)

very curious on the holes made for the cage...

Excellent

New poster! (less than 10 posts)

Quote:

---

Originally Posted by Tutuur

wow awesome project! needs more detailed pics:)

very curious on the holes made for the cage...

---

The base:

http://img11.hostingpics.net/pics/438047DSCN1432.jpg

the tubes :

http://img11.hostingpics.net/pics/247660DSCN1431.jpg

reinforcement :

http://img11.hostingpics.net/pics/268018DSCN1493.jpg

http://img11.hostingpics.net/pics/629220DSCN1504.jpg

http://img11.hostingpics.net/pics/630443DSCN1508.jpg

http://img11.hostingpics.net/pics/807782DSCN1516.jpg

http://img11.hostingpics.net/pics/431974DSCN1538.jpg

http://img11.hostingpics.net/pics/761780DSCN1540.jpg

http://img176.imageshack.us/img176/8344/photo357zr3.jpg

http://img11.hostingpics.net/pics/565870IMG2418.jpg

http://img11.hostingpics.net/pics/252379IMG2417.jpg

Great project mate, but where are your harness bars on the cage? Have i missed them or are you going a different route?

very nice like the cage

how much power are you running with 20psi?

Amazing work, love the effort put in to the shell before anything else :agree:

New poster! (less than 10 posts)

Quote:

---

Originally Posted by Alastair

Great project mate, but where are your harness bars on the cage? Have i missed them or are you going a different route?

---

http://img11.hostingpics.net/pics/732025gtJeff276.jpg

Quote:

---

Originally Posted by chipis

how much power are you running with 20psi?

---

http://img15.hostingpics.net/pics/80...geobanc001.jpg

http://img15.hostingpics.net/pics/63...geobanc003.jpg

Result 220cv and 30 m.kg torque.

Proper job! :agree:

My kind of 5. Love it! :cool:

Very cool car!

New poster! (less than 10 posts)

Here are the latest developments alpine turbo with aac alpine R5 turbo:

The water pump modified :

http://img15.hostingpics.net/pics/91...agealpine1.jpg

http://img15.hostingpics.net/pics/18...gealpine18.jpg

Valve :

http://img15.hostingpics.net/pics/76...gealpine35.jpg

http://img15.hostingpics.net/pics/60...gealpine37.jpg

Screw in 12.5 :

http://img15.hostingpics.net/pics/63...gealpine43.jpg

Cup sinks candles, push rod and aac type "mini GR.A" and "GR.A" R5
turbo :

http://img15.hostingpics.net/pics/42...gealpine25.jpg

Door pulley crank out more 25mm :

http://img15.hostingpics.net/pics/82...gealpine53.jpg

alternator support :

http://img15.hostingpics.net/pics/75...gealpine57.jpg

My 4 in 1 Stainless :

http://img15.hostingpics.net/pics/381359Divv096.jpg

http://img15.hostingpics.net/pics/38...gealpine76.jpg

for a descent oil :

http://img15.hostingpics.net/pics/24...gealpine84.jpg

Assemble the engine :

http://img15.hostingpics.net/pics/41...ealpine125.jpg

http://img15.hostingpics.net/pics/26...ealpine127.jpg

In the engine compartment :

http://img15.hostingpics.net/pics/12...ealpine180.jpg

http://img15.hostingpics.net/pics/35...ealpine206.jpg

Two small video :

engine

Exhaust

;)

excellent work, very interesting :agree:

Great work :agree:
Love the look of the alpine head in a 5gtt engine bay.

looks really good! this is the stuff we want to see!!!!

will this one be at the Meeting desn Sangliers 2013?

would love to see it in real life!

Love these kind of builds! Great work, have you had it set up on a Dyno yet?

really nice build there, well done:cool::cool::cool:

the best 1.4 pushrod engine set up:smokin:

Very nice! Nice thought out and engineered conversion and restoration. Would love to see this in the flesh. :agree:

New poster! (less than 10 posts)

Thank you.

Quote:

---

Originally Posted by Tutuur

looks really good! this is the stuff we want to see!!!!
will this one be at the Meeting desn Sangliers 2013?
would love to see it in real life!

---

Yes, it may be possible.

Quote:

---

Originally Posted by Woznaldo

Love these kind of builds! Great work, have you had it set up on a Dyno yet?

---

no, not yet.

Quote:

---

Originally Posted by HAndy

really nice build there, well done
the best 1.4 pushrod engine set up

---

My engine configuration :

- piston Wössner
- FGS800 shirt
- Cylinder head R5 alpine turbo
- ratio of 8.0 / 1
- PUSH ROD r5 turbo 2
- Camshafts R5 turbo 2 TDC
- 4 en 1 exhaust manifold home
- down pipe KTR 2 "1/2 (63mm)
- exhaust system KTR 2"1/2 (63mm)
- T25/T28 Hybrid turbo
- Intake manifold injected R5 turbo
- Megasquirt ECU, sequential injection, ignition coil jumostatique, Map 0/43 psi, launch control and flat shift

Currently under adjustment. ;)

Quote:

---

Originally Posted by la turbine 63

New poster! (less than 10 posts)

Thank you.



Yes, it may be possible.



no, not yet.



My engine configuration :

- piston Wössner
- FGS800 shirt
- Cylinder head R5 alpine turbo
- ratio of 8.0 / 1
- PUSH ROD r5 turbo 2
- Camshafts R5 turbo 2 TDC
- 4 en 1 exhaust manifold home
- down pipe KTR 2 "1/2 (63mm)
- exhaust system KTR 2"1/2 (63mm)
- T25/T28 Hybrid turbo
- Intake manifold injected R5 turbo
- Megasquirt ECU, sequential injection, ignition coil jumostatique, Map 0/43 psi, launch control and flat shift

Currently under adjustment. ;)

---

very nice build man can i ask what liners you use on the build

Very exciting.....:agree:

i think those fgs800's are the liners

New poster! (less than 10 posts)

Me cylinder Liner fgs800

Quote:

---

Originally Posted by la turbine 63

New poster! (less than 10 posts)

Me cylinder Liner fgs800

---

ok tanks do you have a link for them or are custom build

New poster! (less than 10 posts)

custom build !


New video :

http://youtu.be/fjWYcf0Ke7M

:)

Very nice indeed!

are you using stock elbow to downpipe?

could free up some breathing by getting a one piece?

Elliott

Looks awesome mate, great conversion!

New poster! (less than 10 posts)

Quote:

---

Originally Posted by danielmk323

ok tanks do you have a link for them or are custom build

---

You can purchase the liners here :
http://www.gtturbo-online.fr/bas-mot...te-gs-800.html

If you want to call, the store's owner do speak english.

Quote:

---

Originally Posted by Fred²

New poster! (less than 10 posts)



You can purchase the liners here :
http://www.gtturbo-online.fr/bas-mot...te-gs-800.html

If you want to call, the store's owner do speak english.

---

Tanks for the link