-
Project Beast , return to Tungy
Ive owned this 5 for 6 years now , had some ups and downs as they all do and i absolutly love it ,
I thought i would share my project as its nearly finished ,
ill add more pics when i can :):)
Spec ;
Knife edeged crank ? ( former owner ,no reciept )
low comp pistons ? ( former owner ,no reciept )
T2/25 hybrid turbo from cr turbos
lightened/balanced k-tec fly wheel
k-tecs Group N clutch
strut brace
k-tec single wiper
fmic
samco hoses
swift seats
scorpian exhaust
mocal oil catch tank
mocal oil cooler
alloy rad
apex suspension -50mm
Borris big down pipe with lambda hole
afr gauge lm-1,
kevlar turbo heat shield,
seperate oil pressure gauge
wolfrace alloys (not liked to much need some different black ones)
Drilled out door hinges to 8 mm,
windscreen surround welded,
boot floor panel edges welded,
replaced bent out door (thieves)
replaced rusty boot lid
fitted new door window motors (still crap)
replaced badboy bonnet with oe
fitted new oe grill and badge
fitted oe spoiler,
new skirt strips,
resprayed in tungy in and out ,
removed aux fuel tank,
-
Re: Project Beast , return to Tungy
This is how it looked when i bought it back in 2004,
the wheels on it were 17" fox 5 spokes that caught the arches and were very buckled, so i bought these wolfrace ones , also it had a bodged oil cooler stuck on with jubilee clips wich dropped the oil all over the place after about 700 miles :crap:
https://www.rtoc.org/boards/picture.p...pictureid=3650
-
Re: Project Beast , return to Tungy
The engine bay as it was when i bought it .
less the alloy carb top , turbo heat shield , piper x air filter and magnecore leads
https://www.rtoc.org/boards/picture.p...pictureid=6878
-
Re: Project Beast , return to Tungy
-
Re: Project Beast , return to Tungy
-
Re: Project Beast , return to Tungy
-
Re: Project Beast , return to Tungy
Where did you get the copper brake lines from mate?
-
Re: Project Beast , return to Tungy
Quote:
Originally Posted by
MATT C Ringworm Tuning
Where did you get the copper brake lines from mate?
ebay m8
http://cgi.ebay.co.uk/RENAULT-5-GT-T...item3a5faec44a
comes with all fittings attached flared ends / measured to lengh , :) , would be cheaper if you bought the pipe and ends yourself ,but for ease and convenience this is best
-
Re: Project Beast , return to Tungy
was going to ask why the colour change but i'm guessing after seeing the repair work it would need a full respray so might as well have the car the same colour inside and out including the engine bay.
are you keeping the bodykit or going oe?
-
Re: Project Beast , return to Tungy
Quote:
Originally Posted by
TNT Tricky Nicky
was going to ask why the colour change but i'm guessing after seeing the repair work it would need a full respray so might as well have the car the same colour inside and out including the engine bay.
are you keeping the bodykit or going oe?
were on the same wave lengh :laugh:.
yeah going back to tungy rather than takin engine out to get the bay done, also gettin inside the back resprayed tungy ,, its not a bad colour you know i do like it .
ref body kit that ktec bumper came off ages ago and replaced with oe although i have cut a large section out of it new . also replaced oe mirrors and got rid of bad boy bonnet , i liked the bonnet but was rusting through anyway.
fitting oe spoiler and grill also
-
Re: Project Beast , return to Tungy
Ditch that body kit its shocking. restore it back into the grey good move to, thank god another Ali g 5 turbo gone forever.
Keep up the good work :)
-
Re: Project Beast , return to Tungy
those mirrors have gone also ;)
-
Re: Project Beast , return to Tungy
gonna have to refit the blacked out windows for now , but in the near future i would like to change them
-
Re: Project Beast , return to Tungy
-
Re: Project Beast , return to Tungy
Quote:
Originally Posted by
Dan y
gonna have to refit the blacked out windows for now , but in the near future i would like to change them
Hi Dan, looking good! I have loads of sets of rear quarter windows, don't want alot for them, they are getting in the way if you get stuck.
Cheers
Mike
-
Re: Project Beast , return to Tungy
Can't you just pull the tint off and give it a wipe over with thinners?
I only say this as I sold my tinted windows and replaced them with a set I had in the shed from another car, I had them re etched with the wrong number blanked out, didn't bother me until I had to explain it to a sharp eyed police man who thought I'd stolen my own car.
I'm gonna replace my windows again if I can find a set without the security marking. The original tinted windows got smashed when the lad I sold them to barel rolled his 5 through a hedge into a field :dearme:
-
Re: Project Beast , return to Tungy
never thought of that tbh seems like a pain in the ass of a job , especialy if it goes wrong and i end up with crap windows and not able to get anymore .
Then again there have been loads of jobs that i thought would be a pain in the hoop to do (drilling hinges) but turned out better than expected ,
-
Re: Project Beast , return to Tungy
Respray finished , just got to refit all kit etc and get windows fitted :)
pics to follow
-
Re: Project Beast , return to Tungy
Quote:
Originally Posted by
Dan y
pics to follow
Chop chop :D
-
Re: Project Beast , return to Tungy
-
Re: Project Beast , return to Tungy
:agree: only a teaser but looking lovely:smokin:
-
Re: Project Beast , return to Tungy
:agree: looking very nice, very nice indeed...:)
-
Re: Project Beast , return to Tungy
It is nice to see all the R5 GT Turbos being given and new lease of life. Well done!!!:agree:
-
Re: Project Beast , return to Tungy
much more like it the more gtts getting bought back to how they are is getting impressive rtoc saving the gtt :)
-
Re: Project Beast , return to Tungy
https://www.rtoc.org/boards/picture.p...044686&thumb=1 https://www.rtoc.org/boards/picture.p...044686&thumb=1:):):)
windows and doors should be fitted by friday then i bring the car home to fit all kit, bumpers etc :)
-
Re: Project Beast , return to Tungy
-
Re: Project Beast , return to Tungy
cant wait to get it back and fit the body kit back on and get out in it although its fairly cramped in my garage, and -6 the other day :(.
i wish it was still summer ...
Mot (bfg test) booked in for wed 8th so ill need to remove sidey :(.
-
Re: Project Beast , return to Tungy
Looks wicked:agree:
Good luck with getting it all back together, my garage is like a fooking shoe box too-serious pain in the arse but better than nothing.....
Keep them pics coming:coffee:
-
Re: Project Beast , return to Tungy
Thanks for the comments guys , just been to see it and its finished now just waiting for sealant in windcreen to dry. Im going to collect it in the morning. looks very shiny :)
-
Re: Project Beast , return to Tungy
Had a nightmare today, :cry:
i went to pick the car up from the garage that took glass and doors out and did some welding on windscreen surround and boot floor and replaced front screen rubers , they also transported the car on a trailer (rented from a scrap yard near by)300 meters down the road to spray shop and back .
now heres the shock , i was expecting about 600euro max ,, nah try 1500 :eek: , got him to 1200 cash , but i nearly died, 20 hours labour :scratch: ,
ive had to borrow half of it off my mum (lmao) otherwise id be skint over crimbo .
ill hopefully collect it tomorrow afternoon if i can :cry:
-
Re: Project Beast , return to Tungy
all fitted back together now , its not left my single garage yet for a photo as its snowing and its not fitted with winter tires :scared:. toyo proxes not very good on snow at all :wasntme:.
will have to come out tomorrow though for its yearly test so ill get some then , ill also take for a quick burn depending on the roads to show it off :wasntme:.
:ashamed: i decided to spray the small bonnet stay holder catch thingy in black as it was rusty , i did it away from the car but ive managed to get black spots on the bonnet wing and headlight :mad: ,
is there any easy ways of removing it ? it picks off but i dont wanna ruin my new paint by scratching it after spending 3000 euro
-
Re: Project Beast , return to Tungy
Will a machine polish not get the marks out.
As for the windows its dead easy to remove, pull off, scrape the excess glue off with a Stanley blade or preferably those blades people use to chop charlie with ;) then a rub over with tar & glue remover, dead easy honest.
Lets see some pictures to :)
-
Re: Project Beast , return to Tungy
-
Re: Project Beast , return to Tungy
well chuffed with the car now :) , passed test with ease 2 advisory notes 1st being summer tires fitted and the 2nd change colour on log book , lmao :):)
-
Re: Project Beast , return to Tungy
good man what a difference :)
-
Re: Project Beast , return to Tungy
Quote:
Originally Posted by
philg
good man what a difference :)
:agree: agree with phil dan , well done on mot etc..thats a great feeling!..keep it up lad.
-
Re: Project Beast , return to Tungy
She looks a lot better dan. :agree:
-
Re: Project Beast , return to Tungy
Quote:
Originally Posted by
Dan y
Hard to believe that it's the same car. Not a Barry-boy in sight. Gr8 work fella
:agree:
-
Re: Project Beast , return to Tungy
Nice looking car:agree:
Looks alot better without all the chav-tastic bumber and ****e:agree:
-
Re: Project Beast , return to Tungy
I prefered it how it was.... not enough 5 out there with extreme body kits on them anymore... soon they will be the classic 5's :):laugh:
-
Re: Project Beast , return to Tungy
Quote:
Originally Posted by
Penfold
I prefered it how it was.... not enough 5 out there with extreme body kits on them anymore... soon they will be the classic 5's :):laugh:
ill stick an alloy universal spoiler on :wasntme:
-
Re: Project Beast , return to Tungy
Thanks for the comments peeps :).
if anyone was wondering why the reg changed its because its not registered with dvla anymore its now with BFG (British forces Germany not big friendly giant)
-
Re: Project Beast , return to Tungy
lucky guy looking fresh. Good job.
-
Re: Project Beast , return to Tungy
This looks great :)
I like it without the spoiler too. Is it staying off forever?
-
Re: Project Beast , return to Tungy
Quote:
Originally Posted by
scratcher
This looks great :)
I like it without the spoiler too. Is it staying off forever?
thanks :), i will be butting the spoiler back on soon just abit worried about sticking it on my new paint :laugh:
-
Re: Project Beast , return to Tungy
i wish this snow would go away so i can get her out :(
-
Re: Project Beast , return to Tungy
-
Re: Project Beast , return to Tungy
That looks spot on! IMO, just needs a non chrome windscreen wiper to finish it!
-
Re: Project Beast , return to Tungy
i am thinking about it , also black wheels, maybe just get these sprayed ??
-
Re: Project Beast , return to Tungy
been for a rolling road test today :).
http://www.youtube.com/watch?v=G1PIEokaIF4
sorry for crap iphone video.
145.8 bhp , 198.9 Nm at 14psi not sure what 198.9Nm is a guess torque.
im not sure what the results mean tbh if they are good or bad , i think the bhp is a pretty fair figure and im happy with it (for now).
Bit sad getting the lowest bhp out of 12-15 cars. :(.