Handy Andy has asked me to start a new project thread for him and post up the pics so far of his latest project and when I say its nuts, I'm mean its totally insane:D
Right lets start with the basics which Andy well correct if I get anything wrong.
The car is based on a 1989 campus he bought off ebay which had a twin campus engine conversion using a R11 turbo subframe in the back. Both those campus engines have gone and a 1.8ltr 16v clio valver engine has found its way into the back but with a few tweaks :D
The basic plan is is a wide bodied kit with extended bumpers and shed loads of power form the arse end.
This is the modded rear bumper extended and the slats cut out to alow airflow
http://img.photobucket.com/albums/08...ect5gtt020.jpg
The modded boot lid with plenty of metal cut out again to let air out
http://img.photobucket.com/albums/08...ect5gtt013.jpg
The front subframe with a sump guard and lots of welding and bracing to help stiffen it up
http://img.photobucket.com/albums/08...ect5gtt021.jpg
http://img.photobucket.com/albums/08...ect5gtt022.jpg
The new strut brace's, a R5 GTT one for the front and a R11 turbo one for the back
http://img.photobucket.com/albums/08...ect5gtt023.jpg
The new rose jointed locking arms to replace the steering arms on the rear subframe
http://img.photobucket.com/albums/08...ect5gtt016.jpg
The new rad with a twin fan setup
http://img.photobucket.com/albums/08...ect5gtt017.jpg
The new pre rad for the charge cooler which is massive
http://img.photobucket.com/albums/08...ect5gtt018.jpg
A view of the interior with the new engine panels, cage and the coolant lines from the front to the back
http://img.photobucket.com/albums/08...ect5gtt076.jpg
http://img.photobucket.com/albums/08...ect5gtt075.jpg
http://img.photobucket.com/albums/08...ect5gtt083.jpg
http://img.photobucket.com/albums/08...ect5gtt081.jpg
The removable engine inspection hatch
http://img.photobucket.com/albums/08...ect5gtt082.jpg
The modded airbox off a R25 v6 turbo
http://img.photobucket.com/albums/08...ect5gtt038.jpg
The hydrolic hand brake
http://img.photobucket.com/albums/08...ect5gtt010.jpg
The laguna diesel gearbox with hydrolic clutch system
http://img.photobucket.com/albums/08...ect5gtt135.jpg
The front bay with new fuel cell in place
http://img.photobucket.com/albums/08...ect5gtt084.jpg
The hydrolic clutch master cyclinder
http://img.photobucket.com/albums/08...ect5gtt085.jpg
And the resevior for the clutch and the brake system
http://img.photobucket.com/albums/08...ect5gtt085.jpg
The new valves measuring in at 33mm on the inlet valves and 30mm on the exhaust
http://img.photobucket.com/albums/08...ect5gtt015.jpg
The timing sensor bracket
http://img.photobucket.com/albums/08...ect5gtt004.jpg
The T04E turbo
http://img.photobucket.com/albums/08...ect5gtt034.jpg
The custom inlet manifold which has the stock 190cc injectors for off boost and 440cc injectors for boost
http://img.photobucket.com/albums/08...ect5gtt003.jpg
Can you spot whats under the manifold? yes its a Eaton M62 supercharger
http://img.photobucket.com/albums/08...ect5gtt024.jpg
The new belt arrangement
http://img.photobucket.com/albums/08...ect5gtt026.jpg