Re: what are these two items
number one is a one way valve isn't it? to stop boost pressure entering the rocker
number two looks like you suggested, the boost pipe from the OE guage along side the speedo cable
Re: what are these two items
no#1 is fitted to the end of the metal pipe [carb end] that comes off the std turbo elbow.
Re: what are these two items
Quote:
Originally Posted by
raj
no#1 is fitted to the end of the metal pipe [carb end] that comes off the std turbo elbow.
hate to sound dumb but im not sure exactly that this is your speaking about, does anybody have any pics
Re: what are these two items
Quote:
Originally Posted by
djinuk
hate to sound dumb but im not sure exactly that this is your speaking about, does anybody have any pics
there is a metal pipe that goes from the turbo elbow to the carb top, just before it reaches the carb top is where that bit fits.
so,, turbo elbow - metal pipe - rubber pipe with above piece - rubber pipe to carb tpiece/join - carbtop.
if youve got a bolt in the back of your turbo elbow/or the holes been welded up you wont need that piece.
Re: what are these two items
Can you take a wider picture of your engine bay. Make sure the carb and turbo are in view, along with any pipework between the two. :)
Re: what are these two items
best pic i have, a lot of engine stripped back , but from what i can see there is actuallt a bolt in the back of the turbo elbow
http://i3.photobucket.com/albums/y98...gineemppty.jpg
Re: what are these two items
OK, it looks like you have a single port actuator, and hence the 'cup-mod' style of boost control hoses. The one way valve is part of the original 'boost-compensation' boost control circuit, which requires a two port actuator, and a pipe from the turbo elbow (which you have blanked off with a bolt)
So you don't need the one way valve in your case.
Re: what are these two items
awesome, from taht pic could you give me a quick run down of where my vacume pipes should go