plug/grommit for wiper hole in bootlid?

[gttjames]

Am doing away with the wiper and washer jet there, got a big pack of grommits and got 1 that i think will do the job for the washer jet, but havnt got any big enough for the wiper hole.

Anyone know what size i need to find? Or better still anyone got one that they could post to me if i sort postage etc, thanks

[tiff_lee]

I'll probably be able to let you know tomorrow evening as ill be home then and have a pack of the larger grommits.

[gttjames]

:)top work, let me know mate. thanks

[tiff_lee]

Ok just measured my tailgate as I have the wiper motor removed and the hole is about 18mm diameter but you also have a slight cut out at the top where the motor slotted into position.

Now it turns out I don't have any grommets here and I wont be able to get mine until next weekend but if you can hang on till then I will have one that fits. I have this selection box...

http://cgi.ebay.co.uk/Blanking-Grommets-200-Mixed-Boxed-Plugs-Kit_W0QQitemZ280390611288QQcmdZViewItemQQptZUK_Car sParts_Vehicles_CarParts_SM?hash=item4148953158&_trksid=p4634.c0.m14.l1262

There is one size where "B" the drilled hole size is 19mm so should be a snug fit.

[Trevhib]

I used Renault OE bungs from an R5 TS (the only model that had them). Paul B helped me source them. Funnily enough they fitted better than any other non-oe grommits I tried to find and fit...

Incidentally, I don't have the part numbers, sorry.

[sonic-jdm]

go to your local B&Q in the electrical area. i was there last week and found a few at different sizes, cheap too!:cool:

[gttjames]

cheersw sonic, went to b&q, had loads in there, 19mm, 20mm, 25mm, so got a pack of each and will see what fits if i get a chance tomorrow

Staff in there wernt brilliant, looked at me like i was mad when i asked for grommits, they said 'dont think we'd sell those here':laugh:

[gttjames]

none of the ones i got fitted, some did but they dont cover the slotted bit as trev said, am going to try and geting a gen renault one

[sonic-jdm]

none of the ones i got fitted, some did but they dont cover the slotted bit as trev said, am going to try and geting a gen renault one


bummer dude,

you can also get loads in different sizes in MAPLINS:)

[James5]

Going to bump this as I need to blank the 2 holes on the tailgate and if anyone has the size for the smaller hole (washer jet) aswell or the renault part numbers for blanking plugs would be fantastic. I need to know asap as I want to order or pick them uptoday and car not here.

Cheers James

[CoooL]

Why not just weld the holes? :)

I've just done it this eventing..

[James5]

Why not just weld the holes? :)

I've just done it this eventing..

Because i like the option of being able to put wiper motor back in

[CoooL]

True.. i was a little should i? just thought sod it.. and grabbed the welder..