getting emissions down

[Junglist]

Hi all , i need to get the emissions down on the 5 ,, any ideas,
i take it a good service may help , is there much else i can do ?
cheers - Dan

[JP Racing]

New poster! (less than 10 posts)

On the side of the carb there is a mixture screw and winding this in should help but if you go to much the car won't run to well on idle.

[Junglist]

New poster! (less than 10 posts)

On the side of the carb there is a mixture screw and winding this in should help but if you go to much the car won't run to well on idle.

thanks ill gve that a turn or two before my retest

[Chris Hebden]

thanks ill gve that a turn or two before my retest

Do it during your re-test mate, then you can set it to the correct lambda/Co!

[Junglist]

Do it during your re-test mate, then you can set it to the correct lambda/Co!

whats it supposed to be

[Sangin]

My screw is all the in and the last service i got i was running 7.5. Would a new carb solve this problem?

[Junglist]

i dont think its supposed to be all the way in loi

[dave r5]

all way in then screw out 3.5 turns

(i think thats rite)
correct meif im wrong