Andrew Cooke
06-08-2009, 14:21
It's been a bit quiet on updates to the cam application, I'm still measuring the odd cam, but have been a bit slack on updating the online files.
I've now got the complete set of crossflow cams, I'm not sure whether to add them as it may confuse things, they are:
Gordini N/A
Gordini Turbo
T2
I also measured a cam for Rob@backyard, he thought it might have been an EP race cam, but wasn't sure. On measuring it I believe it to be standard, but different to the standard cam I'd previously measured. I've called it "std GTT 2", it's a lot better than the cam I measured before, so if you have a few cams kicking around it's worth checking the lobe lift to pick the best one.
Spooky has lent me a Catcams 5500327 (BB catcam, catcam 285, call it what you will). I'll be measuring it later, so should get the curves up today.
There may be times when the application doesn't work, it's possibly just me changing files, but if the problem persists then shout up.
http://www.rtoc.org/cam/
I've now got the complete set of crossflow cams, I'm not sure whether to add them as it may confuse things, they are:
Gordini N/A
Gordini Turbo
T2
I also measured a cam for Rob@backyard, he thought it might have been an EP race cam, but wasn't sure. On measuring it I believe it to be standard, but different to the standard cam I'd previously measured. I've called it "std GTT 2", it's a lot better than the cam I measured before, so if you have a few cams kicking around it's worth checking the lobe lift to pick the best one.
Spooky has lent me a Catcams 5500327 (BB catcam, catcam 285, call it what you will). I'll be measuring it later, so should get the curves up today.
There may be times when the application doesn't work, it's possibly just me changing files, but if the problem persists then shout up.
http://www.rtoc.org/cam/