PDA

View Full Version : in car boost controller



LYNCHSTAR
01-08-2009, 20:42
for some reason my in car boost controller is not working properly it was working fine yesterday when i turn it up to 15 psi it don,t work like it should there,s nowt there ive checked the pipes for leaks and there ok. i have the K-Tec in car boost kit :confused:

jantheeven
01-08-2009, 20:48
Bin it...
You can only set up your carb for one boost setting. In-car boost controllers are a lot of fun, sure, but they can mess up your engine due to bad over or under fuelling...

Scoff
01-08-2009, 21:27
check for boost leaks in the main boost pipes too. If there is a leak then boost will be lower than before.

you could also check the "vent" pipe that comes from your bleed valve, make sure it isn't blocked, or the pipe snagged, etc.