PDA

View Full Version : Rear bumper hangar mount


diggerdog36
22-07-2009, 12:48
New poster! (less than 10 posts)

My 5's rear bumper has become detached on the right hand side, where the hangar has rusted through. Are these available to weld back on or are they a DIY job?
mightymanx
22-07-2009, 13:01
not to sure wich bit your after m8 but cb bob has a few bits that may help heres the links

http://cgi.ebay.co.uk/RENAULT-5-GT-TURBO-REAR-BUMPER-FIXING-BRACKETS_W0QQitemZ390002177447QQcmdZViewItemQQptZU K_CarsParts_Vehicles_CarParts_SM?hash=item5acdf0f5 a7&_trksid=p3286.c0.m14&_trkparms=65%3A12|66%3A2|39%3A1|72%3A1689|293%3A1| 294%3A50

http://cgi.ebay.co.uk/RENAULT-5-GT-TURBO-SIDE-BUMPER-BRACKETS-PAIR_W0QQitemZ390005134253QQcmdZViewItemQQptZUK_Ca rsParts_Vehicles_CarParts_SM?hash=item5ace1e13ad&_trksid=p3286.c0.m14&_trkparms=65%3A12|66%3A2|39%3A1|72%3A1689|293%3A1| 294%3A50
Bigfoot
22-07-2009, 13:41
Im guessing he is actually talking about the body panel which the bumper attaches to as plastic dont normally rust ;)

As for replacing, just cut a piece of metal to shape and weld
djinuk
22-07-2009, 14:26
I have this job coming up as mine has also gone :(
diggerdog36
22-07-2009, 18:07
New poster! (less than 10 posts)

Im talking about the bit where the bumper actually bolts onto the car, at the back of the rear arch at the top
Bigfoot
22-07-2009, 18:19
http://www.rtoc.org/boards/album.php?albumid=413&pictureid=3904

Like that then at back of the car.
diggerdog36
22-07-2009, 18:21
New poster! (less than 10 posts)

Bloody hell, I hope mine doesnt look that bad, the bit im talking about is missing from the photo, obviously in the masses of rust!
mightymanx
23-07-2009, 00:08
o rite my mistake sorry :coffee:
Kris M
23-07-2009, 20:19
You need to weld up something like this :)

http://www.rtoc.org/boards/album.php?albumid=489&pictureid=7353
Sy5GTT
23-07-2009, 20:32
You need to weld up something like this :)

http://www.rtoc.org/boards/album.php?albumid=489&pictureid=7353


Top job that too :agree:
djinuk
23-07-2009, 22:05
slightly confused.. on this piece, how come are there two holes.. i can unerstand one for the bolt to go through and onto the bumper bracket but what about the second.

http://www.rtoc.org/boards/picture.php?albumid=489&pictureid=7353
JRP
23-07-2009, 22:25
other hole is for the black rubber mount on your bumper.
Sy5GTT
23-07-2009, 22:27
other hole is for the black rubber mount on your bumper.


:agree:
J$£5GTT
23-07-2009, 22:29
other hole is for the black rubber mount on your bumper.


i fout it wer a towin eye..
:cartman::cooter:
JRP
23-07-2009, 22:31
question is... is that black rubber mount essential.

As on my rebuild i got a cup car bumper sprayed up for my car, its minus the black rubber bits.

Will it still sit ok ?
Spooky
23-07-2009, 22:34
i thought the rr bumper was fixed in 4 areas...the 2 rear arch points and the bottom lip of the bumper on some brackets ?

or am i mistaken ?
J$£5GTT
23-07-2009, 22:38
im sure its ok without,isnt it just there to locate an make the bolt line
up to its hole easier,so your not peeing about tryin to find it...
Kris M
23-07-2009, 23:08
TBH, ive never had a 5 with the rubber locating bits at the sides

Ive only ever attached the bumper loosly at the sides, them moved it up and down (on the side) bolts to get the desired position. Then nipped up the two brackets at the bottom of the rear bumper