turbo oil return pipe

[TNT!hammond]

Can anyone please tell me the size of the phase1 and phase2 pipe into the sump . I currently have a phase 2 pipe from turbo to a phase 1 sump with what looks like a bodge join on the sump thats leaking. Im now after a 90 degree reducer from phase 2 to 1 any help on the sizes i require would be great.

thanks ross

[Brigsy]

16mm o.d ph1 sump, possibly 20mm for ph2, can't remember exact size. Can measure the sizes tomorrow though if nobody else can clarify.

[TNT!hammond]

nice one mate, if you could check tommorow if no one else answers that would be a great help :)

[TomH]

New poster! (less than 10 posts)

i think its 22mm, thats what i remember last time i measured mine

[Ian S]

Yeah, 22mm.

I don't know of any reducing 90° rubber.

I changed mine over to suit the sump. Had a phase one, changed it, found the hoses too small! Changed them all to phase two inc the turbo outlet, which I had to get made.

22mm was a bit too small and it leaked. The silicon 90° bend needed a 23mm on the turbo side.

Some told me he could fit an end of phase one hose on the sump inlet and then fit the phase two hose over it.

[Brigsy]

I got a silicone reducing 90deg samco hose from rallydesign, £7. fits a treat:)

[Ian S]

Nice :)

I paid about £20 or something for the turbo drain one :crap: