removing anti perc fan wiring from loom

[c5 swh]

Im not going to be putting the anti perc back in so just wondered if you can simply cut off the wires from the loom to tidy it up a bit.

If so can i just simply snip the wires circled in picture or do i have to leave the relay and cut the other?
http://img.photobucket.com/albums/v721/shanehandley/loom.jpg

thanks

[TNT Tricky Nicky]

you can remove the whole lot, iirc you can trace it back far enough on that loom so you only need to cut and blank one wire as the rest go to back of alternator and is all fairly self contained. (i.e remove all associated wires and relay)

was awhile ago when i did mine so someone correct me if i'm wrong........

[c5 swh]

so does that relay only affect the anti perc fan? so if i cut off all circled it wont have any knock on affects to the rest off the loom?

[Os8472]

Nope just the perc fan and make sure once you've removed it to dispose of it in the proper RTOC manor

Namley set it on fire and dance around it singing along to Ozzy Osbourne:devil:

[c5 swh]

ok will do:devil::devil::smokin:

[Purple_rob]

PM for you buddy ;)