2 small hoses

[Harrison01]

need a bit of help with the last 2 hoses in my engine bay. the first one joins a load of other pipe work coming off the LHS of the carb/lobster tail (black hose) and the other comes off the RHS of the carb (black hose) see photos.

what should i do with them.. ive done the cup mod so should i plug them or should they be joining something else.

[Spooky]

The pipe in the first piccy looks like it may attach to the nipple that connects up to the dashboard boost guage, not completely necessary if you have one connected up from the vac line.

2nd pic, I'd extend that pressure ref. pipe you have on the carb so that it is closer to the floor and further from a heat source...:agree:

[Kempy]

The second picture is an overflow i think. Im sure that goes to air. Probably wants to be a lot longer than that though as there could be fuel in there. Someone correct me if im wrong. :D

[Spooky]

read what i said above...:cooter:

[Spooky]

Ahh, in the second picture, that pipe off of the carb which is sat on the rocker cover doesn't connect to anything other than the air lol

I re-read what you asked, so there, all is good :smokin:

[Harrison01]

2nd pic. should i run a new hose as low to the floor as poss... what gains will i get out os curiosity.....


The pipe in the first piccy looks like it may attach to the nipple that connects up to the dashboard boost guage, not completely necessary if you have one connected up from the vac line.

2nd pic, I'd extend that pressure ref. pipe you have on the carb so that it is closer to the floor and further from a heat source...:agree: