View Full Version : side exits
Just testing the water but who would be interested in a group buy of a side exit ? I havent contacted any companies at the mo but if there is enough interest then i will be ringing round .I shall start the ball rolling :
Beardo
New poster! (less than 10 posts)
yeah c what prices u can get mate! i`d b interested.
car.crash
21-09-2008, 15:55
depends how loud they are. if they are quieter than my ktec one i may be interested.
I'll be up for one my bearded friend. :D
Penfold aka The Dealer
21-09-2008, 17:07
I know K-Tec is a Tiger system... Tiger(Stainless Steel Exhaust Ltd) have a contract with K-Tec and will not sell to anybody else...
But good luck with the group boy, if the club can help out in anyway please feel free ton get in touch.
Shopper
shop boy if i get enough interest i was going to ask if they could be brought through the club just so that people know its legit and im not running off with their money !
Andrew Cooke
21-09-2008, 18:16
you'll be doing well to make it quieter than the K-Tec whilst keeping it straight through. I fitted a silencer 50% longer in the tunnel and it sounded the same, I then added a big fat silencer where the fuel tank is, and that sorted it. There just isn't space up front for a decent silencer.
I'd have thought there would be interest in a 2 1/2" rear exit that's 'quiet'. We'll see what happens at Mallory if they get the noise tester out.
imo the 2.5" rear exit system sounds a better idea:agree:
sideys are annoyingly loud.
ok i will look into both then ! Any particular makes to avoid ?
dave j gtt
21-09-2008, 21:32
get someone to bend pipes at cost effective price :confused: powerflow ? :confused:
would be best to have some one with background to develope such exhaust and have one built after intial testing, for noise / power / and wow factor :laugh:
i'd be intrested in a new one :) something i have toyed with the idea of also would be best to have down pipe as opition.
Tiny and myself know somebody how would make us one , will have a chat and go from there !
car.crash
21-09-2008, 21:44
mr cooke just made a good point about 2 1/2 inch rear exit, there are no off the shelf ones yet there are tons of sideys around. i would deffo have a rear exit 2 1/2 and i know a few other locals would too.
I had a Tiger 2.5" rear exit system on my raider. It was apparently a one-off jobby at the time (this is going back a long while ago), but I'm led to believe they will fabricate them if you're prepared to pay.
You might be able to bag a batch of 5/10, say, if you get enough interest. Should imagine you could probably wangle a bit of a discount then as well.
Failing that, the only other off-the-shelf 2.5" rear exit system I know of is GT Tuning's jobby.
I've asked fabricators and they've all refused saying it'll knock or just won't fit. They were just not interested.
I however bought a custom made one from 5 Alive in Lewisham which I never fitter as I've the power flow sidey from K-Tec and didn't want to risk compromising the power. Label has come off so I can't tell who made it.
Haywood and Scott in Essex probably would probably make one / some though, but not cheap.
You will be wanting only mandrel bends, not the rubbish squashed bends?
scorpian used to make a 2 inch, 2 1/4 inch and a 2 1/2 inch rear exit exhausts.
the problem is that when the tube goes over the top of the trailing arm area, there just isnt enough room, and it will knock....
scorpian used to make a 2 inch, 2 1/4 inch and a 2 1/2 inch rear exit exhausts.
the problem is that when the tube goes over the top of the trailing arm area, there just isnt enough room, and it will knock....
I expect the 9.8mm lift in the spec isn't including clearance's ?
scorpian used to make a 2 inch, 2 1/4 inch and a 2 1/2 inch rear exit exhausts.
the problem is that when the tube goes over the top of the trailing arm area, there just isnt enough room, and it will knock....
Mine didn't...
oops, wrong thread for me.
The Scorpions were only 1 3/8" or so through the silencer, even the 2 1/2".
Mine didn't...
my 2.5" exhaust does'nt knock either! :)
my 2.5" exhaust does'nt knock either! :)
Mine does..:(
Martyn....11 Turbo
23-09-2008, 10:35
I may be interested in a 2.5" Side Exit if their was a Group Buy.
Tiny Tim
23-09-2008, 10:55
I may be interested in a 2.5" Side Exit if their was a Group Buy.
Im going to speak to him about a custom one for my 11 as due to the extra length, I dont want the exhaust coming out underneath the front door lol
Martyn....11 Turbo
24-09-2008, 10:06
Im going to speak to him about a custom one for my 11 as due to the extra length, I dont want the exhaust coming out underneath the front door lol
Good idea Tiny Tim
5hitpot made a sidey for his 5 about 2 months ago,it cost him less than £20! he done the welding & fitting himself so that kept the cost down.
Tiny Tim
24-09-2008, 10:20
5hitpot made a sidey for his 5 about 2 months ago,it cost him less than £20! he done the welding & fitting himself so that kept the cost down.
In stainless with a slincer? Have a word in his shell-like then dear boy.
New poster! (less than 10 posts)
possibly be interested in a group buy :)
yeah and tried selling it to me on his car, and it put me off the whole car as it was a pole with a bag load of weld on it.
yeah and tried selling it to me on his car, and it put me off the whole car as it was a pole with a bag load of weld on it.
it done the job!! that's all that matters :)
In stainless with a slincer? Have a word in his shell-like then dear boy.
i'l ask,but i dont like your chances as his nipper has just been born :)
THE MASTER
13-10-2008, 01:22
Im going to speak to him about a custom one for my 11 as due to the extra length, I dont want the exhaust coming out underneath the front door lol
tim .. 6f6 sidey on his 11 was a legend:eek::eek::eek::eek::eek:
Tiny Tim
13-10-2008, 08:37
tim .. 6f6 sidey on his 11 was a legend:eek::eek::eek::eek::eek:
Indeed it was. ign off, ign on POP :cool:
Im going to speak to him about a custom one for my 11 as due to the extra length, I dont want the exhaust coming out underneath the front door lol
like this...............
this a 5 sidey with no modding, all i have done is added 2 bobbin hangers to the floor
http://i88.photobucket.com/albums/k168/paulb69_2006/Renault%209%20Turbo/DSC_3587.jpg
Tiny Tim
13-10-2008, 08:57
For me personally, that comes out too far forward on the 9/11. I'd want mine exiting further toward the back.
But im just a picky sod :)
i l k e r
13-10-2008, 10:34
New poster! (less than 10 posts)
For me personally, that comes out too far forward on the 9/11. I'd want mine exiting further toward the back.
But im just a picky sod :)
Tiny if you make it longer to exit right infront of the rear wheel you can fit a "big fat silencer" right underneath the rear seat ;)
Tiny Tim
13-10-2008, 10:36
New poster! (less than 10 posts)
Tiny if you make it longer to exit right infront of the rear wheel you can fit a "big fat silencer" right underneath the rear seat ;)
I did notice there was more room there, however... would it not just be easier to put a smaller one in the 'transmission' tunnel? Why on earth would I want a BIG FAT silencer? :laugh:
i l k e r
13-10-2008, 15:17
New poster! (less than 10 posts)
I did notice there was more room there, however... would it not just be easier to put a smaller one in the 'transmission' tunnel? Why on earth would I want a BIG FAT silencer? :laugh:
my big fat silencer is in addition to the one I have in the transmission tunnel. That was the only way to make it sound like a car, not a tractor ;)
Martyn....11 Turbo
13-10-2008, 19:49
New poster! (less than 10 posts)
my big fat silencer is in addition to the one I have in the transmission tunnel. That was the only way to make it sound like a car, not a tractor ;)
i prefer the tractor sound to be honest
IvanClio172
14-10-2008, 14:02
New poster! (less than 10 posts)
the best sidey i had was on mine/tinys old 21t....where did that one come from tim as that one was awesome....i miss it and the car
Tiny Tim
14-10-2008, 14:06
New poster! (less than 10 posts)
the best sidey i had was on mine/tinys old 21t....where did that one come from tim as that one was awesome....i miss it and the car
Mee too mate, she was a sturdy girl.
Sidey was a mish-mash. The main system was part of a 'Prima Scorpion grp A' racing system for the 21, the end pipe and silencer (which didnt actually silence it lol) was added at a later date by a mate at TopGear in St Albans (Powerflow).
IvanClio172
14-10-2008, 14:13
New poster! (less than 10 posts)
ah so thats why it was so loud then:)
Tiny Tim
14-10-2008, 14:18
Well, lets just say, a 3" system with a 3" internal bore silencer is err... pointless ;)
Martyn....11 Turbo
14-10-2008, 20:03
Well, lets just say, a 3" system with a 3" internal bore silencer is err... pointless ;)
sounds good to me :agree:
rennie5gtt
15-10-2008, 17:56
New poster! (less than 10 posts)
Have any of you used a cbg side exit,
He has two sorts 2 .1/4, and 2.1/2,
I have been think of getting one of the 2.1/2, just wanted to no if they are any good really.
Was going to get one made but they want loads, his is only 210 posted plus vat ,
not to bad.
?????????????????
markey b
18-02-2009, 00:59
imo the 2.5" rear exit system sounds a better idea:agree:
sideys are annoyingly loud.
my bro's just have one made at powerflow... was difficult to bend the 2.5 at the correct angle to go around the tank, but they did it, and it looks pretty trick
imo the 2.5" rear exit system sounds a better idea:agree:
sideys are annoyingly loud.
my bro's just have one made at powerflow... was difficult to bend the 2.5 at the correct angle to go around the tank, but they did it, and it looks pretty trick
lol at my original comment, i changed my mind pretty quick as your bros sidey is now mine:D i have to say they are a little loud/annoying at times though.
gttjames
16-05-2009, 00:09
Only just spotted this thread. Id be interested in a 2.5 rear exit system. As mentioned probably best to get powerflow to make one on a car, then they just copy a load up. Mandrel bent ofcourse, with a big join at the elbow, i have a bigger downpipe, ktec or similar jobby and its about 2.5inch, but then where it joins the scorpion the flange on the scorpion is pretty thin!
Anyone used ktecs 2.5 inch system?
http://www.k-tecracing.com/show_product.asp?id=2666&pic=2
R5GTTRaider
16-05-2009, 00:55
i prefer the tractor sound to be honest
tone deaf.....:laugh:
i got a scorp 2.5 and your right,the inside dia is alot smaller, but.. on idle and off boost it isnt loud, i cant hear it with the window up,
but when boosting it does sound nice, used to be one around sevenoaks years ago and that had a power flow and it sounded terrible, just sounded like no exhaust
tho id like a bigger dia exhaust, would 3" be huge?:scared:
turbodave
16-05-2009, 08:46
yeah im also interested.
ive jumped in on the group buy fora 3inch 1piece downpipe and was thinking about getting a 3inch side exit made up but no silencers.
opinion?
cheers.
Only just spotted this thread. Id be interested in a 2.5 rear exit system. As mentioned probably best to get powerflow to make one on a car, then they just copy a load up. Mandrel bent ofcourse, with a big join at the elbow, i have a bigger downpipe, ktec or similar jobby and its about 2.5inch, but then where it joins the scorpion the flange on the scorpion is pretty thin!
Anyone used ktecs 2.5 inch system?
http://www.k-tecracing.com/show_product.asp?id=2666&pic=2
i swapped a gt tuning 2.5 inch for a 2.5 inch ktec sidey. its a different sound for sure. i wouldnt say it was over loud either, i havent decible tested it yet though.
Its not an unpleasant sound to be ripping around the streets with.
Just dont park next to anyones car you like and fire the car up..muwhahaha :smokin:
R5GTTRaider
16-05-2009, 12:29
yeah im also interested.
ive jumped in on the group buy fora 3inch 1piece downpipe and was thinking about getting a 3inch side exit made up but no silencers.
opinion?
cheers.
i have a 2.5 single section, no middle box, and a 3" exit but the inside dia is tiny, tho it does sound lovly on boost
rs250nut
16-05-2009, 14:13
I would be interested in a three inch sidey, manderel bent :)
I made a full 3" rear exit that didn't knock, bit fiddly routing but certainly not impossible. Also made an experimental silencer for it that managed to make it louder!!! Binned that and just made it a sidey with a single box.
rs250nut
17-05-2009, 21:29
I made a full 3" rear exit that didn't knock, bit fiddly routing but certainly not impossible. Also made an experimental silencer for it that managed to make it louder!!! Binned that and just made it a sidey with a single box.
Dont suppose you still have said exhaust do you?
gttjames
26-05-2009, 19:29
had a meassure up the other day just to see what iv got, external dimater is
downpipe 57cm/ 2 1/4 inch
scorpion system 50cm/ 2inch
Pretty thin hey? I thought the dp was 2.5inch and scorpion 2 and 1/4
Dont suppose you still have said exhaust do you?
It's on the ex CTM efi car. The rear section got binned.:(
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.