how could i wire my own hazards

[scott25]

thought this post was better suited to this section, after reading a previous answer to another one of my questions i realised ive made a right school boy error, cut a long story short my 480 loom in my r5 has no hazard wire's at all, to fix this could i jump of both indicator wires and fit to a switch so it uses the indicator relay, any advice welcome thanks

[rich-hgtt]

How come you've repalaced the whole front loom for the volvo one. I thought you only had to splice in about 4 or5 wires at the connector by the pass headlight to get almost any engine to run in a 5.

[scott25]

the 5 loom was in a bad way with lots of bodges done by all previous owners and relays and fuses were constantly goin so thought id do it this way with all new earths and everythin, was goin spot on till i seen this little mistake :(