cutting tool.?

[raj]

just wondering what the best tool to use is for cutting the bumper.?
i basically want to cut a few slats to aid air flow, i also what to cut inbetween the lower bumper/grill bits.

i have an angle grinder! would this do the job? just thinking as ive used an angle grinder on a scrap bumper and the cuts were not neat at all. so im thinking would it be down to the blade used? what blade is best?

[scratcher]

I used a hacksaw blade on mine to make the towing eye 'slit' bigger, then filed it silky-smooth.

[Kris M]

i have used a jigsaw in the past, worked well :)

[dangerous dave]

i used an angle grinder but it wasnt my greatest idea:scared:

[raj]

ive also got one of these demel type tools, but that'll take forever to cut the bumper:crap:

im thinking of using on of them metal diamond cutting discs on the angle grinder.??

i dont want to feck it up as obviously you only get one chance!
:scratch:

[Spooky]

Angle grinder like Dave said...its like a hot knife through butter :D

[Jimmy_GTT]

New poster! (less than 10 posts)

I suggest you the Multi Cutter PMF 180E from Bosch

http://www.bosch-do-it.co.uk/boptocs2-uk/Product.jsp?country=GB&lang=en&division=hw&ccat_id=95226&object_id=14153

Ideal for such jobs.

[V Man]

If you are cutting big section out a hacksaw to start and then a normal handsaw was spot on:agree:

[Junglist]

ive just done mine with a dremmel , a bit dodgey i wouod say a electric recipertating saw would be best

[J$£5GTT]

small grinder for certain things...jig saws are good to just be careful it does not jump
an have your finger off...