the story so far

[sieger]

how i bought it

http://img265.imageshack.us/img265/4010/turbo07tv.jpg

skirt and other plastic back from painters
http://img190.imageshack.us/img190/1280/afbeelding0053bk.jpg


a few days later the car
http://img211.imageshack.us/img211/9313/resizeofhpim16391mj.jpg


all the stuff mounted

http://img209.imageshack.us/img209/4665/hpim17423vx.jpg

engine bay before..
http://img157.imageshack.us/img157/3493/pvcet5.jpg

After..
http://img40.imageshack.us/img40/9762/img1643n.jpg
last time on the rolling road 163.1 BHP @ 0.8 bar. couldn't do any more because of an crappy fuelpump. The car runs now on 1.2 bar. and in the near future on Megasquirt:cool:

Interiour : suede paint
http://img511.imageshack.us/img511/8923/hpim2773yq3.jpg

http://img384.imageshack.us/img384/2794/renno2yk5.gif

http://img512.imageshack.us/img512/3802/img1646s.jpg

gtz Sieger

More in the near future:)

[Mr 5]

like the bonnet and black grill combo,not too keen on rear light covers but looks like your doing well mate :agree:

[raj]

that looks nice mate:agree: i dont like that bonnet though:sad2: but the car looks alot fresher:)

[sieger]

rear light covers are gone (pretty long time )

today i have putt the radio back in the car

this is how it looks now.

http://img188.imageshack.us/img188/849/dashkld.jpg

[sonic-jdm]

I love this car! thinks its cause its different:agree: nice fella

[tom t]

car looks sweet m8 even better if rear light covers gone. interior looks nice to get some more pics up :agree:

[sieger]

tx..

http://img142.imageshack.us/img142/1629/img1648z.jpg

[xenon]

superbe GT :niceone:

[sieger]

Hi there is some news,

I sold the richmod EZK and bought an already made Megasquirt computer for the b18ft!

also bought an F7R throttlebody (Direct fit :) ) and 315 cc injectors.

I have an question about the throttlebody, there are 3 pins on the body. Who knows their destination on the ecu?

the ecu
http://img263.imageshack.us/img263/7330/dscf2299s.jpg

gtz sieger

[Scoff]

Hi sieger

The 3 pins are 0v, 5v and TPS signal. You use a multimeter to decide which wire or which pin on the throttle pot does what.

It is a bit awkward to explain how you test it, but here goes!

1/ Set meter to ohms range, so that it can read upto 10k ohm (most pots are less than 10k ohm)

2/ Meter between each combination of wires/pins on the throttle pot until you find a pair that does not alter its resistance as the throttle is moved. IE, it'll read a fixed 5k ohm (or whatever) without altering as you move the throttle open or closed. These are your 0v and 5v wires/pins. You will need to decide which is 0v and which is 5v now. The 3rd wire (the one that gave the variable readings) is the TPS signal wire.

3/ To decide which of the wires/pins is 0v and which is 5v you need to pick ONE of those wires/pins you just found and meter between it and the 3rd wire/pin. The reading should alter as you adjust the pot open/closed.

4/ If the reading gets smaller with the throttle closed then you have selected the 0v wire/pin. If the reading gets larger with the throttle closed you have selected the 5v wire/pin.

5/ To verify you have them right, the following things should happen:
- when you meter between 0v and TPS signal wire you should get a low ohms reading with the throttle shut and a high reading with it open.
- when you meter between 5v and the TPS signal wire you should get a high ohms reading with the throttle shut and a low ohms reading with it open.
- now wire them to the 0v, 5v and TPS input on your ECU.

If its an old Clio pot that has 3 wires comming out of it with a GM connector on it then (from memory!!) you have green, red and black. Black is 0v, red is 5v and green is TPS, but verify that with the test above.

[sieger]

okay, i will test it

[sieger]

I still haven't done very much, but i managed the get my hands on a refrubished b18ft for little money.

so hopefully i can get start soon with the megasquirt project.

Setup will be

B18ft
NA ES cam
TD04-H turbo
315 cc injectors
volvo 240 2.3 radiator
16 inch fan
FMIC
FPR

And hopefully running om megasquirt :)

[Penfold aka The Dealer]

Looks good, i like the suede paint, got anymore picture's?

[philr5t]

i think this car looks fantastic great work

[gtmatt]

:)nice car looks well:)

[sieger]

my new engine. overhauled by Vege
http://img51.imageshack.us/img51/686/img1972.jpg

[raj]

my new engine. overhauled by Vege
http://img51.imageshack.us/img51/686/img1972.jpg
wow:eek: that looks minty fresh:agree: who exactly are vege?

[reevio]

New poster! (less than 10 posts)

nice keep up the good work

[sieger]

http://www.vege.nl/index2.php?portalID=17

i got it for a silly price. 234 euro's delivered:eek:

[Spooky]

Vege do a lot of remanufactered/rebuilt engines for exchange or to buy outright for most european cars.

I'm pretty sure of that :crap: :smokin:

[Spooky]

http://www.vege.nl/index2.php?portalID=17

i got it for a silly price. 234 euro's delivered:eek:

Doh...well, it was who I thought it was anyway :laugh:

[raj]

http://www.vege.nl/index2.php?portalID=17

i got it for a silly price. 234 euro's delivered:eek:

thats a good price! did that include the cylinder head too.? im assuming all was built to standard specification?

[sieger]

Yep, Head, block and dis.

Already bought an new waterpump.

Also looking for the phantomgrip to buy. anyone got some (bad / good ) info about them.

gtz sieger

[sieger]

Today i wired up the engine for the Megasquirt computer. Only thing i have to do is the wiring of the throttlebody. Next thing i need to do is to hook up the computer to the system. Lokking forward to it!

http://img696.imageshack.us/img696/4115/img1977i.jpg

[Matt@CodeRedMotorsports]

Yep, Head, block and dis.

Already bought an new waterpump.

Also looking for the phantomgrip to buy. anyone got some (bad / good ) info about them.

gtz sieger

I have one, not fitted it yet though...so can't comment on how good it is....:D

[Kenobi]

Really love this thread keep up the good work.:agree:

[sieger]

Today i went to the Meeting in Gronau (germany)


yesterday i lowerd the 5 a bit

6 cm ground clearance

http://img24.imageshack.us/img24/2898/img2196v.jpg
http://img200.imageshack.us/img200/2272/img2193fd.jpg
http://img191.imageshack.us/img191/1183/img2191u.jpg
http://img690.imageshack.us/img690/5673/img2194n.jpg

[Slim]

nice looking :cool: but not feeling the front... :crap:

[sieger]

hi , the front will be standard again later on this year.

The megasquirt is up for sale, i've got my hands on the Super Rich Mod :)

i don't lots of time to puzzle with the Megasquirt. The super mod is a direct replacement, with the power i am looking for.

what is the box?

* a EZK with a 3 bar mapsensor (1.7 bar or 25 psi max. my turbo is rated 25 psi)
* a MAF with a potentiometer (to get the AFR right (315 cc injectors)
* a MBC

[sieger]

http://img443.imageshack.us/img443/7574/img2099w.jpg

http://img715.imageshack.us/img715/4224/img2098u.jpg

http://img249.imageshack.us/img249/4947/img2093w.jpg

[GTTChris]

First post!

nice work sieger ;) keep up the good stuff!

[sieger]

modified the new bumper a bit, more to follow

http://img243.imageshack.us/img243/7329/img2164n.jpg

[benj88]

Nice work, just wondering what is suede paint?

[garya]

Love it mate right up my street. not to sure about the rear bumper but i suppose its diffrent.love the wheels looks mint.well done mate

[sieger]

a small update, changed the bumperkit to black

lost the clutchpin @ TT circuit Assen
http://img51.imageshack.us/img51/8463/img1529xv.jpg

bumper isn't fitted correctly
http://img228.imageshack.us/img228/453/p7170123.jpg

http://img227.imageshack.us/img227/441/autonv.jpg

My new 'show' wheels Ronal A1 14 inch

it is a photoshop with the old bumperkit, wheels are painted in a funky colour

http://img215.imageshack.us/img215/1402/ronala1.gif

Next thing to do is to fit the new engine and install the new computer

[tom t]

new computer? Car looks sweet like both sets of alloys? What are the black and silver lip ones? There sexual

[sieger]

big mod computer

1,8 bar max

modded MAF

modified software

[sieger]

for my my new engine setup i am looking for an hydraulic clutch setup. i spotted a few of them here on rtoc

i want a standalone setup, and if possible the resivoir incar.

i got an 400 Nm pressure plate

what items must i have?

[sieger]

i ordered some parts for the hydraulic clutch setup

http://img202.imageshack.us/img202/3799/koppel.gif
i want to make a bracket that sits on the gearbox.

more will follow!

[sieger]

the B20F throttlebody fitted with the B18FT TPS , also got my uprated clutch. now just a little more time needed :scratch:

http://img855.imageshack.us/img855/4108/p7080105.jpg

[sieger]

again a little update

clutch cylinder "pull" type
http://img580.imageshack.us/img580/9199/kgrhqvhce2idyjwpzbnwt1g.jpg

celia all track chargecooler
http://img834.imageshack.us/img834/7835/kgrhqfjme4oupepeebok1c4.jpg


rad for the chargecooler
http://img687.imageshack.us/img687/7198/radiatora.jpg

morette head lights
http://img3.imageshack.us/img3/2060/img0084czf.jpg

hopefully i will have some time in october, to build the new engine and all the other stuff

[sieger]

today a test fit for the clutch cylinder. the extention bracket for the soft pedal conversion will act as a support for the cylinder.
What clutchline can i use? braided line or ordinary copper?

http://img846.imageshack.us/img846/5297/dsc01109640x480.jpg

[rs250nut]

Your going to have to use a flexible pipe between the bulkhead and the gearbox so may as well use flexi tube.

[sieger]

thank you for the reply. flexy pipe it is..

today another parcel showed up

http://img708.imageshack.us/img708/7297/img0091ks.jpg

i'm looking foreward to the build..

[sieger]

morette lights trial fitting
http://img835.imageshack.us/img835/9375/dsc01115c.jpg


standard manifold refitted for the charge cooler setuphttp://img842.imageshack.us/img842/599/dsc01119xf.jpg
or like thishttp://img7.imageshack.us/img7/6012/dsc01120sp.jpg

[Markey Mark (BD)]

Why you gone for chargecooler mate?

[sieger]

mainly for the short boost circuit. and to make room for the hydro clutch.

will see what it does :agree:

[tubby5]

looking good:cool:,i reckon some smoked indicators would finish the front of nicely

[xenon]

could you tell me or one to have double Morette optics little?
thank you for your assistance!
;)

[sieger]

I don't understand what yOu mean , but the inner lights won't come back
they are ment for THE air intake

[sieger]

a little update

renault 5 diesel motormount broken
http://img822.imageshack.us/img822/5636/dsc00011eg.jpg
http://img17.imageshack.us/img17/8205/dsc00010nl.jpg
subframe + gearbox painted.
http://img20.imageshack.us/img20/7300/dsc00008bu.jpg

next week i will fit the new motor on the subframe.

in march i gonna book a mornig on the rolling road.

[sieger]

a little update

motor @ the subframe :)
http://img28.imageshack.us/img28/5352/dsc00045co.jpg

http://img515.imageshack.us/img515/534/dsc00053aq.jpg

new radiator (fiat uno diesel)
http://img714.imageshack.us/img714/5499/dsc00055az.jpg

fitted,
http://img440.imageshack.us/img440/7512/dsc00057an.jpg
EGT probe on it place.

http://img853.imageshack.us/img853/1677/dsc00059sp.jpg
Monday i will connect the loom andother bits.

:)

[SCHWARTZ]

Looks ace matey. May be worth swapping that Volvo oil filter for a gtt one will give you a lot more clearance for the rad.

[SCHWARTZ]

Just noticed its not on the block anymore, put a gtt one on:D

[sieger]

jep :) , i will fit the mocal adapter with a smaller filter.

[sieger]

pipe work almost done
http://img856.imageshack.us/img856/4001/dsc00002kov.jpg
http://img6.imageshack.us/img6/7461/dsc00003kb.jpg
http://img545.imageshack.us/img545/3166/dsc00006cx.jpg
only need to bleed the clutch
http://img191.imageshack.us/img191/1028/dsc00014mkk.jpg

almost there
:)

[Tony Walker]

looking fantastic. :agree: Great work

[TNT ANDY]

pipe work almost done
http://img856.imageshack.us/img856/4001/dsc00002kov.jpg
http://img6.imageshack.us/img6/7461/dsc00003kb.jpg
http://img545.imageshack.us/img545/3166/dsc00006cx.jpg
only need to bleed the clutch
http://img191.imageshack.us/img191/1028/dsc00014mkk.jpg

almost there
:)

Looking very good chap - very oe also, you gotto be happy with it so far.

[sieger]

Tx guys! im hoping to get it running 2 the end of this month

[sieger]

it is alive :P

http://www.youtube.com/watch?v=d8IKuJ-X29w&feature=g-upl&context=G2790c12AUAAAAAAAAAA

[sieger]

another movie
http://www.youtube.com/watch?v=d8IKuJ-X29w

can't get the damn clutch working, seems that the slave cilinder is dead

[Markey Mark (BD)]

Looking and sounding good mate :agree:

[sieger]

almost there

http://img826.imageshack.us/img826/8753/201204058.jpg


HKS style air filter behind morette lights
http://img33.imageshack.us/img33/2571/201204059.jpg

pull cilinder is dead, i ordered a willwood item now

[Tony Walker]

Fantastic work :D you think you'll be able to make Blyton??? would love to see it on track.

[sieger]

some works has been done tonight :)

hydro clutch works :)

http://img6.imageshack.us/img6/5236/dsc00021le.jpg

next is tyding up the wires and putting the interior back in
http://img717.imageshack.us/img717/2268/dsc00022vc.jpg

[sieger]

almost ready
http://img98.imageshack.us/img98/1732/dsc00025rp.jpg
http://img3.imageshack.us/img3/5768/dsc00027mw.jpg
a few small things to do :)

[Ricardo]

The car looks awesome, love the engine bay :)

Not a fan of the smoothed tailgate or rims, but thats my opinion :ashamed:

[sieger]

fair play :agree:,

the wheels are my track wheels, my 'show' wheels are still under construction :)

[Brigsy]

Looks well:agree:

[Coops]

:agree::smokin:

[sieger]

just photoshoped my new rims in to an old photo

http://img600.imageshack.us/img600/2898/img2196v.jpg

i think it is gonna look very well :)

[sieger]

current setup :)
http://img339.imageshack.us/img339/9507/img1441ua.jpg

[sieger]

a little updeed

http://img33.imageshack.us/img33/4766/fotoaxb.jpg

[Trevhib]

Cool pic.

[sieger]

Today I finally had Some time for the car :)
http://s17.postimg.cc/keblbopb3/image.jpg

I only needs a new battery and Some new oil

[Nottswoody]

Great car first time iv seen this I think. Don't suppose you have any contacts that can supply looms for the b18ft?

[sieger]

Witch loom do you need ? I have some connections who maybe can be usefull