Dialogys screen prints required for 172

[James5]

As per title I am in need of a screen dump of the Renault diaologys for the 172 f4r lump CB0M with ref to the the oil filter connector / adaptor (The bits that bolts into the block and the filter screws onto) I also need the part number and poundage of the part, screen dump is the most important bit though.

Many thanks
James

[paul b]

http://i88.photobucket.com/albums/k168/paulb69_2006/dialogys/172oil.png

[James5]

Paul many thanks for that do you have the part number for item 2 and if possible the cost?

I take item 3 is for fitment of some kind of sandwich plate

[paul b]

yup, number 3 is if you have an oil cooler plate fitted...

8200545137 about £2.00...bargain...:)

[James5]

yup, number 3 is if you have an oil cooler plate fitted...

8200545137 about £2.00...bargain...:)


Paul many thanks

Was going to to pirtek but Renault is closer and I think that item will work with my mocal kit with my adaptor on the C1j worst case I can at least shorten the threaded bolt down.

[James5]

:crap: it's on back order and got to come in from france so much for me being up and runing this weekend

[Andrew Cooke]

did I miss something?

[James5]

did I miss something?

No 172 lump has gone but I left the adaptor for my mocal kit on the 172 lump but I think the part above can be used anyway to sort my problem.

[paul b]

get yourself down the scrappers......

laguna,19, etc.....all the same...

[James5]

get yourself down the scrappers......

laguna,19, etc.....all the same...


Really that is useful to know, looks like I am down the scrappy tomoz on my day off:D

Paul once again many thanks

[paul b]

PM for you..;)