fog light wireing [Archive]

tom t

14-06-2009, 19:49

ive just been putting my fogs back in my bumper.

and on the passenger side ive got a white block connector and a yellow/green wire coming from the fog light loom and i cant see where they should be connected can anyone help? cheers

Nick k

14-06-2009, 21:08

ive just been putting my fogs back in my bumper.

and on the passenger side ive got a white block connector and a yellow/green wire coming from the fog light loom and i cant see where they should be connected can anyone help? cheers

Air horn wiring is in the same loom as the fog lights. That looks like the wires that go to the compressor?

tom t

15-06-2009, 07:25

kool . ive never had the standard horn wired up. even the single wire nearer my hand? cheers

Woznaldo

15-06-2009, 08:57

These should help:
http://www.rtoc.org/files/Technical%20Files/Wiring%20diagrams/WD057%20FRONT%20FOGLIGHTS.JPG

http://www.rtoc.org/files/Technical%20Files/Wiring%20diagrams/WD021ELECTROPNEUNATIC%20HORN.JPG

Use this one to suss the colours:

http://www.rtoc.org/files/Technical%20Files/Wiring%20diagrams/Colour%20and%20Size%20guide.JPG

tom t

15-06-2009, 22:29

thanks i was going to look over these in my manuel. does anyone know what sort of relays i need for the fog looms? cheers

Nick k

16-06-2009, 21:33

30 Amp 4 pin relay will be fine ;) 5 pin if you can't get a 4 pin will be ok too :agree:

tom t

17-06-2009, 01:02

awesome cheers m8 will give that a check 2moro as im off work. and hopefully ill get my grill back in. and give the car a good old clean.:agree: