View Full Version : Turbo spooling up at?
Hello, on another forum someone has said thier turbo spools up later ie 3500 instead of 2500 because they have a bigger airfilter. Is that right?
TrixNFlix
13-06-2009, 09:04
Is this not because they have a different turbo. I.e. T28.
TrixNFlix
13-06-2009, 09:08
If not they must be smoking crack!:smokin:
Hello, on another forum someone has said thier turbo spools up later ie 3500 instead of 2500 because they have a bigger airfilter. Is that right?
Nope. That is not true.
Nope. That is not true.
What things could change the rpm that the turbo spools up?
R5GTTRaider
13-06-2009, 12:58
What things could change the rpm that the turbo spools up?
size of manifold and size of turbine housing
after all its the exhaust gasses that have to pressurrise before the turbo housing/blades before it takes affect, so if you took the same dia tubes from the head straight to a flange on the turbo id guess you could have the potentional to have instant boost??
What things could change the rpm that the turbo spools up?
Cam, if the turbo was a vnt you can adjust the vanes
R5GTTRaider
13-06-2009, 14:25
Cam, if the turbo was a vnt you can adjust the vanes
which by increasing the volume of air going out in turn creating bigger cfm?
So an ECU cannot control a turbo spool up?
R5GTTRaider
13-06-2009, 14:56
a ecu can control the acuater if its set up that way
mine spools at 2k by the way
So an ECU cannot control a turbo spool up?
The engine map can play a part too but the airfilter change is just BS. If anything it would have the oposite effect should the old filter have been so bunged up that the pressure ratio across the turbo was exaggerated.
R5GTTRaider
13-06-2009, 19:00
think is as much bull **** as a ebay chip :laugh:
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.