MOT time

[FurioKid]

Well after a hard week of sorting problems out, todays the day, time for the MOT after nearly 3 years of work. Fingers crossed

post up once i know

[minty83]

did mine yesterday, chuffed but it failed but just on the handbrake cables.. but then tuned out to be a bitch of a job as the old cable holders had corroided into there holes!

[FurioKid]

Yeah i've replaced everything underneath, handbrake cables, brake pipes and hoses. Main thing will be the emissions and brake roller test

[5alldaway]

goodluck bitch

[BriC]

Good luck matey!

[Sy5GTT]

Good luck mate. :agree:

[FurioKid]

Passed with flying colours. Only problem, still not running right, blew another boost pipe off, not boosting right. Post up a pic in a bit of my engine bay incase anyone sees anything wrong?

[markey b]

Passed with flying colours. Only problem, still not running right, blew another boost pipe off, not boosting right. Post up a pic in a bit of my engine bay incase anyone sees anything wrong?


make sure the boost pipe is clean when ya go to put it back, if its oil on the inside it'll just pop off again.. use brake cleaner or something similar to clean the oil off both bits, and spray hairspray on the bit it goes onto, and refit... no more popping off!!

[FurioKid]

Cleaned all pipes up, alos tried swapping the pipe over on the actuator as i'm running the cup mod, and she goes now :D. something as silly as a pipe on wrong, my own fault :ashamed:.

thanks to everyone for their help :agree:

[Alex]

Good work :agree:

I know what it feels like - I had mine MOT'd on Monday after nearly 3 years off the road/working on it! :D

[FurioKid]

Good work :agree:

I know what it feels like - I had mine MOT'd on Monday after nearly 3 years off the road/working on it! :D

its an accomplishment lol, when a job takes that long it drags on and its nice to finally see light at the end of the tunnel lol