View Full Version : gear linkage set uo
Harrison01
10-06-2009, 16:19
as per the title really. how do i set the gear linkage up?
ive got the bar on but i just need to know how to get it in the right place so i get all gears when i want them.
2nd gear, forward an inch and tighten... im on crack:smokin:
Harrison01
10-06-2009, 17:49
cheers jrp, how will i know when the gearbox is in second.???
do i pull the lever on the bottom of the gearbox towards the front of the car
The way i was told to do it... now ile get shot down no doubt.
pop the bolt through it, get in select 2nd as its the farthest throw for the gear,
pop it forward about an inch then tighten up the linkage.
Could be way wrong but try it, see if that works
R5GTTRaider
10-06-2009, 20:14
would this explain my sloppy gear stick to the left, its tight to the right but sloppy to the left. my e30 was the same never figured out what it was
rs250nut
11-06-2009, 17:34
would this explain my sloppy gear stick to the left, its tight to the right but sloppy to the left. my e30 was the same never figured out what it was
Its probabley sloppy because the bush is fecked :)
phase i 16 v turbo
11-06-2009, 17:37
Hi is number 10 fitted?
R5GTTRaider
11-06-2009, 19:59
Hi is number 10 fitted?
was that to me?
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.