Brake pipe fittings ?

[Andrew Cooke]

any idea what thread the fittings are likely to be on the hard lines? I'm guessing 5/clio/twingo will all be the same.

I've got that many pipes to make that it's going to be worth getting the kit to do it myself.

[Tiny Tim]

Bruce should know - I borrowed a kit off him to do some of the hard lines on the old 11t.

[Woznaldo]

On the 5 they are all M10 except for a couple of M12 on the rear brake pressure compensator. I take it that's what you're after?

[Andrew Cooke]

On the 5 they are all M10 except for a couple of M12 on the rear brake pressure compensator. I take it that's what you're after?

that's the type of thing :) I'll have to check the clio compensator to see what it uses.

[djinuk]

I brought the kit mate, laser kit, and the laser pliers aswell. Do ne me well and i did the whole 205 using it.

Well worth buying

[Alastair]

On the 5 they are all M10 except for a couple of M12 on the rear brake pressure compensator. I take it that's what you're after?


Yep, M10 x1 not M10 X 1.5.