Engine Loom Pics Required

[James5]

As per title I am in need of some pics of a laid out R5 C1J GTT engine loom, preferable laid out on the floor as I am making up a new loom to repair / remove / replace mising connections.

[James5]

I have stolen this pic from a pistonheads advert,

Any more pics please add to this thread the more the better

[Bigfoot]

If you haven't got one by tonight ill take a picture of mine, got a brand new one boxed up.

[Chris Hebden]

http://s436.photobucket.com/albums/qq83/Chris_Hebden/Engine%20Loom/

I've taken mainly pics of the connections, when i build mine i'll have a spare engine loom to compare lengths too

[James5]

Cheers for the link Chris looks perfect, looks like my rad fan switch connector has the wrong connection on it and I am missing a couple of the orange and brown wires.

Don't suppose anyone can tell me exactly which orange and brown wires on the loom main connection go to which orange connection. (sorry lack of Haynes pages) Please see attached image's with arrows I need to know which one goes to say the sensor on the side of the oil feed to turbo, sump level etc or if get goes to base etc.. if some could label them up for me on the is1 image then with the actualt connections on the 2nd image maybe in 1,2,3,4 style :cooter:

A good tool to do this would be a continuity tester (excuse spelling)

Cheers

[TrixNFlix]

1st pic
Oil level sensor = b2 & b4
Oil pressure sensor = b3 & b6
This is what haynes says anyway. Have to trace them to the second pic James. Bloody iPhone and meat fingers. :eek:

[IANMM]

http://i728.photobucket.com/albums/ww290/IANMM69/Photo0226.jpg

[R5GTTRaider]

so what pins do the oil pressure sender go to, also is the level sender the same part or on the other plug thats shown? as theres two orange wires on the multiplug

[TrixNFlix]

Oil level sensor = b2 & b4
Oil pressure sensor = b3 & b6

If you look at the main engine connector behind the passenger headlight it has numbers down the side and, a and b columns along the top

[R5GTTRaider]

oh i see cheers
and the next silly qestion, weres the level sender located, i see a plug on the sump, but no wires, amazingly i now have no level!, think the wire was lose and now fallen off

[IANMM]

front of the sump round plug with 2 connectors

[James5]

Cheers guys for all your help i now have a loom with all connections on and going to the right places:D

[R5GTTRaider]

front of the sump round plug with 2 connectors
yer thats the one i saw, and no wires :rolleyes:

ok well looks like some wiring is in need!!