Where To Fit Senders?

[jure]

New poster! (less than 10 posts)

I bought oil temperature gauge and water temperature gauge and they (of course) came with senders. So, where is best place to fit oilsender one as well as water one?

Cheers

[paul b]

do they have bolt on, stick on,or what type of senders???????

[car.crash]

oil sensor in the oil line to cooler, water sensor in top hose to rad.
oil sensor holder 1/2" mocal push fit, water sensor holder 32mm.

[jure]

New poster! (less than 10 posts)

Both are bolt in type. Little smaller than radiator fan switch.

[youngscottie]

New poster! (less than 10 posts)

its worth putting the oil sender in the turbo oil feed line
this way you,ll always know the turbos getting good pressure
if you want the bay to look less clutered theres a bung into the main oil gallery just under the altinator but the feed pipes the one to go for;)

[car.crash]

its a temp not pressure gauge.

[youngscottie]

New poster! (less than 10 posts)

think most people plumb into the top rad hose for coolant temp but i wouldnt recommed it renault take temp off the pump so id rather take my readings from there:cool:

[Mart]

I'd personally apply the oil temp' sender to the sump.

[youngscottie]

New poster! (less than 10 posts)


its a temp not pressure gauge.
:ashamed:oopps note to oneself must read before posting:cry: