View Full Version : Grill Space measurments required
Can some one please measure the space behind the 5 GTT grill, Height & width (baiscally need to know the space to fit an Intercooler their)
Many thanks James
JRP this could be something for you to do instead of sitting at home masturbating, make yourself useful get out to your 5 and measure bitch cm or inches (the grill area please not your cock)
Chris Hebden
27-05-2009, 15:27
Dude, you gave me these measurments!!!! 67cm width, 24 cm height! Hope this helps i have a grill mount that i can measure if you wish?
to busy eating quavers and strawberrys watching porn... hold on ile go check
Dude, you gave me these measurments!!!! 67cm width, 24 cm height! Hope this helps i have a grill mount that i can measure if you wish?
:laugh: Chris, what intercooler did you fit as I have just been looking at the ebay special and I reckon I could get one to fit with pipe run for about £200.00. If you could measure your intercooler that would be cool.
Chris Hebden
27-05-2009, 16:41
:laugh: Chris, what intercooler did you fit as I have just been looking at the ebay special and I reckon I could get one to fit with pipe run for about £200.00. If you could measure your intercooler that would be cool.
I went for a Nayls special! I'll get measuing tonight, its slightly tight with the hose run and if it really worried me i'd get a grinder to the body BUT i think its my poor installation to be honest!
I went for a Nayls special! I'll get measuing tonight, its slightly tight with the hose run and if it really worried me i'd get a grinder to the body BUT i think its my poor installation to be honest!
Thats what I am wanting to do, any pics aswell would be cool to get an idea of it as Nayls as changed pics in his profile :rolleyes:
here you go james...
http://i44.photobucket.com/albums/f17/blick_001/DSC00650-1.jpg
http://i44.photobucket.com/albums/f17/blick_001/DSC00639-1.jpg
did have it like this 4 a while but it started 2 rub on the bonnet abit...
http://i44.photobucket.com/albums/f17/blick_001/DSC00576.jpg[/IMG]
http://i44.photobucket.com/albums/f17/blick_001/DSC00580.jpg
http://i44.photobucket.com/albums/f17/blick_001/DSC00605.jpg
Feck me Blick that is a long pipe run for a grill mount :laugh: But that is basically the intercooler if not a little smaller that I am looking into
Out of interest how have you kept the rad of the intercooler as I can't see any brackets as I was worried about the rad touching it and rubbing on it eventually causing a hol in the a/c or the rad?
Chris Hebden
27-05-2009, 19:55
Alright buddy the intercooler is 18cm tall by 59cm long (inc the inlets) and 6.5cm deep!
I cant take pics of the pipe run as there isnt anything in my engine bay at the min but i can bolt the intercooler back in place to give you an idea if you want?
I had to "turn" the carb top to face the offside of the car but wasnt done very well and used the campus pulley with a 10x1075 belt
Alright buddy the intercooler is 18cm tall by 59cm long (inc the inlets) and 6.5cm deep!
I cant take pics of the pipe run as there isnt anything in my engine bay at the min but i can bolt the intercooler back in place to give you an idea if you want?
I had to "turn" the carb top to face the offside of the car but wasnt done very well and used the campus pulley with a 10x1075 belt
If you could take a pic of it all together that would be cool :D
Out of interest where did you get your iintercooler from as all the ones I have looked at are 69cm in length which is quiet long
Feck me Blick that is a long pipe run for a grill mount :laugh: But that is basically the intercooler if not a little smaller that I am looking into
Out of interest how have you kept the rad of the intercooler as I can't see any brackets as I was worried about the rad touching it and rubbing on it eventually causing a hol in the a/c or the rad?
the rad just pushes back enough 2 fit her in.... dont get me wrong! it is a tight fit but ive done a few 1000 miles with it in place now, shes sound with no rubbin etc and she runs cooler than she did b4 :agree: :laugh:
Chris Hebden
27-05-2009, 20:53
If you could take a pic of it all together that would be cool :D
Out of interest where did you get your iintercooler from as all the ones I have looked at are 69cm in length which is quiet long
Mate it wont be for a while before i start to get anything back in the car!
It was a custom intercooler which i bough of Nayls! He might be able to tell you who made it for him!
Mate it wont be for a while before i start to get anything back in the car!
It was a custom intercooler which i bough of Nayls! He might be able to tell you who made it for him!
was intercooler kings..... nayls give me the idea for mine! but i managed2 buy a bigger 1!!!! :laugh::laugh: about 80 notes if i remember rightly chris.
Chris Hebden
27-05-2009, 22:11
was intercooler kings..... nayls give me the idea for mine! but i managed2 buy a bigger 1!!!! :laugh::laugh: about 80 notes if i remember rightly chris.
Sorry was that £80 for the one you bought matey?
Sorry was that £80 for the one you bought matey?
i think so chris yeah!!! maybe £89 no more than that.... the pipework probably cost more. :laugh:
Cheers Guys sorted an I/C and pipe run out, had to go down the route of campus pulley and belt
Foglight wires need to go behind the bumper mate ;) :wasntme:
Intercooler looks good there though, you get it running ok yet ?
MOT'd ???
Foglight wires need to go behind the bumper mate ;) :wasntme:
Intercooler looks good there though, you get it running ok yet ?
MOT'd ???
LoL that was me just testing it out for connections, got it running got to the MOT station passed the emissions test then the car stopped working, and wouldn't start so had to abort MOT :cry:
Looks like a knackered starter and fuel pump :crap: bridged the fuel pump and it worked for a sec then died:o go works from a push start also need to sort horn as that died whilst it was tested LOL
What have you done to that car matey, it worked fine before you put the 172 lump in, it's never been the same since :wasntme:
Still, at least you still have the car, wish I still had mine :(
What have you done to that car matey, it worked fine before you put the 172 lump in, it's never been the same since :wasntme:
Still, at least you still have the car, wish I still had mine :(
It will be back mot re-booked for tuesday need to get the following parts
Starter
Fuel pump
Horn
Anyone local got this parts available to borrow so I can at least get through mot
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.