PDA

View Full Version : Is this a t25


JRP
22-05-2009, 13:07
As per pics got it for 30 quid, just needs a rebuild. although its not in bad nick.

By the way... Chris aka fidos got a raider is into raiding men;)
fidos got a raider
22-05-2009, 13:17
Fail
James5
22-05-2009, 13:43
Compressor housing is defo t25 what does the rear exhaust housing have stamped on/in it look at the section that bolts onto the manifold should be stamped inside .

LOL
JRP
22-05-2009, 13:50
RGT 02 G thats the only things stamped
James5
22-05-2009, 14:27
RGT 02 G thats the only things stamped

Where's that stamped matey?
JRP
22-05-2009, 14:30
exhaust side, by the part that bolts to maifold:cry:
Adey aka Ewok
22-05-2009, 14:35
Look inside the turbo where it would bolt to the manifold, anything in there?
JRP
22-05-2009, 14:35
.35
JRP
22-05-2009, 14:38
or is it .65 hmmm not so clear
James5
22-05-2009, 15:03
Isn't a .35 a T2 housing?
Spooky
22-05-2009, 15:38
yes
fidos got a raider
22-05-2009, 15:38
As per pics got it for 30 quid, just needs a rebuild. although its not in bad nick.

By the way... Chris aka fidos got a raider is into raiding men;)

Just cause i'd turned you down john
fidos got a raider
22-05-2009, 15:39
Still not a bad buy for £30 john
James5
22-05-2009, 15:46
Still not a bad buy for £30 john

:agree: - Get yourself a rebuild kit and do it yourself matey just remeber to mark everything on the shaft:)
JRP
22-05-2009, 15:49
can i not get a bigger exhaust for it?
djinuk
22-05-2009, 15:52
:agree: - Get yourself a rebuild kit and do it yourself matey just remeber to mark everything on the shaft:)

is diy rebuilds not a major no no, ? even marking everything up id be nervous. i read a driftworks article on doing it that inspired me and gave me confidence to do it myself, however the turbo broke again shortly after so i decided its a job ill leave to the pro's.. am i wrong?
Nayls
22-05-2009, 15:59
is diy rebuilds not a major no no, ? even marking everything up id be nervous. i read a driftworks article on doing it that inspired me and gave me confidence to do it myself, however the turbo broke again shortly after so i decided its a job ill leave to the pro's.. am i wrong?


if you get it balanced after it will be fine.
James5
22-05-2009, 16:20
can i not get a bigger exhaust for it?

Best speaking to Adam L matey for that as i think it all depends on the rear wheel size