seat fixing advice [Archive]

Nayls

19-05-2009, 18:16

I've got some buckets (cheap crap) but i have no subframes for them.

can i just buy these to fit them? or do i need something else? only asking as normally you get a proper frame,if these will do the job i'l go for these instead.

http://www.merlinmotorsport.co.uk/p4268/COBRA-SEAT-RUNNERS/product_info.html

scratcher

19-05-2009, 18:22

You need the subframe to bolt to the original holes on the floor, then the runners fit to those.
I got some used ones from CGB a little while ago. Pretty cheap...

Nayls

19-05-2009, 18:25

You need the subframe to bolt to the original holes on the floor, then the runners fit to those.
I got some used ones from CGB a little while ago. Pretty cheap...

so i cant just bolt the runner to the floor?

Adey aka Ewok

19-05-2009, 20:31

You can do if you like but u might be very low down. I've got some seats with just runners on that I'm making a frame to raise them up on as I can't find a suitable subframe

mr bean aka pete

19-05-2009, 21:40

or you could buy some standard seats off ebay or on the classifieds and chop the seat frames and fabricate and weld them to fit your bucket seats ?? thats all i did to my buckets as i couldnt find any runners to fit mine :)

Nayls

19-05-2009, 22:48

or you could buy some standard seats off ebay or on the classifieds and chop the seat frames and fabricate and weld them to fit your bucket seats ?? thats all i did to my buckets as i couldnt find any runners to fit mine :)

:agree:

worth a go!