PDA

View Full Version : PROBLEM...!!!! Bent Pushrod.....!!!!


IANMM
07-05-2009, 16:53
ok in my my hast to start the car today i forgot to set my tappets and after some strange clunking noise and taking off the rocker cover i found three pushrods had come away and one was bent (number 3 from the left) now whats the procedure for changing them...??? do i chang 1? all of them ? is it head off etc..??? please help :(

also on 1,2,3,4 the pushrods have a little cream on the bottom now i think it might be from when i bleed the cooling system before and a little water went that way or do you think its took the head gasket out ? 5,6,7,8 are all clean and i drained the oil out the sump and that looked ok also the water looked fine....

any help is greatly apreciated

Ian
JRP
07-05-2009, 17:16
You could bend it back into shape, pop it in see how it goes, although id advise new ones...
IANMM
07-05-2009, 17:17
just that one or a new set?

is there anything you need to do with replacing them or is it as simple as putting a new one in its place?
IANMM
07-05-2009, 17:20
http://i728.photobucket.com/albums/ww290/IANMM69/Photo0281.jpg


the bent pushrod

http://i728.photobucket.com/albums/ww290/IANMM69/Photo0282.jpg

how the oil looked when i drained it out

http://i728.photobucket.com/albums/ww290/IANMM69/Photo0283.jpg
JRP
07-05-2009, 17:24
More techie head req... When i remove them i take them out with the follower and keep them in order, as they all wear to each other if you get me, id just change the one individule
Nayls
07-05-2009, 18:21
just that one or a new set?

is there anything you need to do with replacing them or is it as simple as putting a new one in its place?


yup,just stick a replacement in there an away you go.
markey b
07-05-2009, 18:29
all i've ever done is replace the bent one, same when i've done pistons, liners etc as well...

if it aint broke, dont fix it :agree:
IANMM
07-05-2009, 19:09
ok coolio best place to get them from? Renault or CGB ?
phase i 16 v turbo
07-05-2009, 19:12
If you get stuck I have a box of good push rods.
Nayls
07-05-2009, 19:13
ok coolio best place to get them from? Renault or CGB ?


pete has 20 for sale :)

http://www.rtoc.org/boards/showthread.php?t=5963
turbodave
07-05-2009, 19:32
hi mate where in the midlands are you?
i have a full set here from my old engine you can have a few for free.