Log in

View Full Version : Get my 5 Going Again!


VINNY
15-09-2008, 20:54
New poster! (less than 10 posts)

Just wondered if there are any RTOC members local to North London who might assist in gettin me 5 goin again! 1. Needs new Ignition Barrel fitting :( 2. Bonnet won't open as cable is stuck :eek: 3. Hasn't been started for getting on a year now so all advice gratefully received :agree: Cheers all :coffee:
Frix
16-09-2008, 09:38
hi mate

where in north london are ya?
5teve L
16-09-2008, 10:31
Undo the two nuts on the side of the cable puller (2x 10mm) & pull the lot, sometimes the cable pops out from the puller under the bonnet but stays in the catch part, if you see what i mean..
James5
16-09-2008, 11:11
Undo the two nuts on the side of the cable puller (2x 10mm) & pull the lot, sometimes the cable pops out from the puller under the bonnet but stays in the catch part, if you see what i mean..


:agree:Agree with Steve just done the same thing on a friends raider undone the 2 x 10mm long bolts on the bonnet release under the dash,
VINNY
17-09-2008, 18:04
New poster! (less than 10 posts)

Cheers folks.Will have a go this weekend :cool: I am in Camden, North West London...
Bodell
17-09-2008, 18:23
I will be down your parts on saturday (bit of electric ballroom :))

Enfield ^
VINNY
22-09-2008, 17:18
New poster! (less than 10 posts)

Thanks! Got me bonnet open this weekend :pimp: only need ignition barrel fitting now. Any advice appreciated :eek:
THE MASTER
23-09-2008, 02:45
hi mate

where in north london are ya?

nice profile frix :D