Battery in boot conversion help please !!

[TURBO'D CLIO]

I'm putting my battery in the boot of my car and was wondering if this cable is high enough amperage or will it melt when i start the car lol..

http://cgi.ebay.co.uk/10M-REEL-RED-20mm-135AMP-BATTERY-STARTER-CABLE-CAR-BOAT_W0QQitemZ260386197848QQcmdZViewItemQQptZUK_Ca rsParts_Vehicles_CarParts_SM?hash=item260386197848&_trksid=p4634.c0.m14.l1262

[TURBO'D CLIO]

Any one???, i wanted to order the cable tonight.. :agree:

[Scoff]

Looks OK that, if it turns out that there's too much of a volt drop then you could double up with it. I think it said there was 10M on the drum ?

[TURBO'D CLIO]

Looks OK that, if it turns out that there's too much of a volt drop then you could double up with it. I think it said there was 10M on the drum ?

Just wernt sure what the ampage of the volvo engine was when it's cranking? I was also going to run a seperate earth from the battery to the front bay so all the ecu's get a good earth etc...

[IANMM]

Just wernt sure what the ampage of the volvo engine was when it's cranking? I was also going to run a seperate earth from the battery to the front bay so all the ecu's get a good earth etc...


put a clamp meter over the live feed while you crank it over and that will tell you the load :)

[IANMM]

http://www.maplin.co.uk/Module.aspx?ModuleNo=222032&doy=29m4&C=SO&U=strat15