replacing rocker shaft

[jack joy]

Hi there,going too replace my rocker shaft,to do this I will need to remove 4 of the head bolts,Haynes doesn't cover this,and I've never removed/replaced head bolts before,just to double check,can you re-use the old h/bolts or should I replace with new ones?also what is the tightening sequence,when replaceing just these 4 bolts?
I'm probably making too much of it:rolleyes: ,I just don't want to break anything!
Thanks in advance. ;)

[RICHIE]

Hi there,going too replace my rocker shaft,to do this I will need to remove 4 of the head bolts,Haynes doesn't cover this,and I've never removed/replaced head bolts before,just to double check,can you re-use the old h/bolts or should I replace with new ones?also what is the tightening sequence,when replaceing just these 4 bolts?
I'm probably making too much of it:rolleyes: ,I just don't want to break anything!
Thanks in advance. ;)

it is just the four bolts you need to remove sequence wont matter. i would use new head bolts just as good practice. it would be a long job if you had one snap on you

[jack joy]

Cheers;)