View Full Version : JRP JERPA JERPA back in the game
Thats a fantastic pic matey:agree:
http://www.rtoc.org/boards/attachment.php?attachmentid=6428&d=1275339851
Well done to you boys sorting out the leaks:agree::coffee:
Boys? err i just pulled my finger out and did it..:smokin:
Boys? err i just pulled my finger out and did it..:smokin:
:laugh: You feeling ok JRP:agree:
Yeah, my backs upto the job now so im happy to do most things on it.. people forget about my back and just think im lazy... true when the engine got dropped in i was in a wheel chair... but these things get forgotten.
Greatful for all the help i recived
I love the three on the drive picture, whites rock.
phil
Glad you sorted all the leaks, looking forward to seeing it at National Day :)
old skool turbo power
10-06-2010, 21:20
A great day had by all i think... nice little turn out AND some pukka photos!
Long arse day in the end but well worth it.
Managed to pop the engine bay back together after finding a few leaks and get alot of other things sorted.
oh well enjoy
my car is now off the road for now i had it fail on the brake lines and found out later that the brake lines were no good and that the cylinder had been leaking as well due to the fail:(after tryin to remove the blaed nipple SNAP:mad:not to bad though because i had to replace the caliper anyway it was sticking just abit:( just hope the other 3 brakes will be ok to do :scared:.whats the best way to remove the hand brake cable outta the capiler?outta intrest whos is the 5 on the left with the stickers on it,running across the bonnet?i do like the look of :cool:
my car is now off the road for now i had it fail on the brake lines and found out later that the brake lines were no good and that the cylinder had been leaking as well due to the fail:(after tryin to remove the blaed nipple SNAP:mad:not to bad though because i had to replace the caliper anyway it was sticking just abit:( just hope the other 3 brakes will be ok to do :scared:.whats the best way to remove the hand brake cable outta the capiler?outta intrest whos is the 5 on the left with the stickers on it,running across the bonnet?i do like the look of :cool:
That's Bongs 5 non rtoc member it's an ex radbourne racing car in fantastic condition stickers are a little faded though
phase i 16 v turbo
11-06-2010, 09:10
That's Bongs 5 non rtoc member it's an ex radbourne racing car in fantastic condition stickers are a little faded though
This car has been around for ages in Wimbledon area. It is still all OE. I even knocked the door years ago to see if it was for sale. Good find John.:agree:
This car has been around for ages in Wimbledon area. It is still all OE. I even knocked the door years ago to see if it was for sale. Good find John.:agree:
Yeah it is very OE other than the radbourne decal strips in fact the new owner not JRP has refurbed the alloys and it needs a repair to the passenger door as someone tried to break in to it but other than that it is perfect runs like a dream and it so quiet and the engine sounds fantastic.
phase i 16 v turbo
11-06-2010, 09:28
Yeah it is very OE other than the radbourne decal strips in fact the new owner not JRP has refurbed the alloys and it needs a repair to the passenger door as someone tried to break in to it but other than that it is perfect runs like a dream and it so quiet and the engine sounds fantastic.
The strips aren't Radbourne decals, they were put on a few of the late cars in serveral dealships in the South, not sure about the rest of the UK.
Penfold aka The Dealer
11-06-2010, 09:33
The strips aren't Radbourne decals, they were put on a few of the late cars in serveral dealships in the South, not sure about the rest of the UK.
Ashford Dalership did this to the ph1... i like them, I know when the car is mine I wont be taking them off.
http://i255.photobucket.com/albums/hh149/sexychrissmith/Mint%20ph1/23122008280.jpg
Big Steve - Raider
11-06-2010, 09:45
If the old boy parts with it mate!? ;)
Penfold aka The Dealer
11-06-2010, 09:58
If the old boy parts with it mate!? ;)
He will, saw him the other day, gonna meet up with him with the gordini and get some nice pics...
The strips aren't Radbourne decals, they were put on a few of the late cars in serveral dealships in the South, not sure about the rest of the UK.
That explains it then:)
The strips aren't Radbourne decals, they were put on a few of the late cars in serveral dealships in the South, not sure about the rest of the UK.
That car did come from radbourne in wimbledon. I was with john when he brought it of the old chap in rosehill. I had a look at the cars old paper work and it has radbournes address an the number plates. so its been through there at some point. :)
phase i 16 v turbo
11-06-2010, 11:51
That car did come from radbourne in wimbledon. I was with john when he brought it of the old chap in rosehill. I had a look at the cars old paper work and it has radbournes address an the number plates. so its been through there at some point. :)
Yes I know it came from Radbourne, I was only saying the Decals aren't a Radbourne one off. Several dealers did it to the last lot of cars they had to try and make them look like a limit edition.
old skool turbo power
11-06-2010, 22:18
Yes I know it came from Radbourne, I was only saying the Decals aren't a Radbourne one off. Several dealers did it to the last lot of cars they had to try and make them look like a limit edition.
:agree:when i brought my car from cgb he said they did do this to a few of the 5 turbos because they were takin a while to sell on the forecourt and was abit of a problem to get rid of.adding the stickers it wouldd make them apealing to the eye:cool:and as you said pass them off as a limited eddition.im pretty sure he said it was only down the south london area they did this.
The new Bill J
12-06-2010, 12:01
Several dealers did it to the last lot of cars they had to try and make them look like a limit edition.
Much more exclusive than those Raiders :D
Much more exclusive than those Raiders :D
:laugh::laugh:
Yes I know it came from Radbourne, I was only saying the Decals aren't a Radbourne one off. Several dealers did it to the last lot of cars they had to try and make them look like a limit edition.
I understand what you mean mike:agree:
MOT???:D
The only problem with my car is me, apparently. In this case it would be true.
Just waiting on mike, to try and source a driveshaft for me, then i'll get the ticket.
So thanks in advance to mike for the driveshaft :)
And james by the way.. i love you
The only problem with my car is me, apparently. In this case it would be true.
Just waiting on mike, to try and source a driveshaft for me, then i'll get the ticket.
So thanks in advance to mike for the driveshaft :)
And james by the way.. i love you
:cooter: Love you to my bare back lover
:cooter: Love you to my bare back lover
err broke back mountain boys lol :hump:
err broke back mountain boys lol :hump:
Come on Phil you were up that mountain aswell :) chocolate cowboy :cooter:
This is for the people who ask and ask for updates and i never bother.
Ok most of you now know iam very unhappy with my paint job.
So today armed with G3 compound, sonus polish compound, nattys wax (smells sexual) and a host of other goods i went to town on her.
Trying to sort out the things the body shop so woefully attempted to correct.... pathetic if iam to be truthful.
Anyhooooo it took fecking ages but i think one maybe two more sessions on it i may be a tad closer to being happier, this is how she now looks.
:(
Big Steve - Raider
27-06-2010, 17:10
She looks absolutely Spangly-tastic mate! :niceone:
Defincately looking forward to getting a picture of all these minty OE examples re-emerging now! ;)
P.S. - I like your old man's new 5 series! :D
Looking good Mr Humpledink when's the next get together? I know Phil is out of the game for a while now with the newborn:)
Looking good Mr Humpledink when's the next get together? I know Phil is out of the game for a while now with the newborn:)
urr hmmmmm not that long my old fruit cake i call paternity leave from work paternity project 5 to be finished i think my new little matalida(tilly) new how much i need to get the car ready for nationals and thats why she came out a month early deffinatly daddys girl just need to explain to the better half :scratch:
Ticket and tax aquired :)
Thanks for every bodys help to this point.
Penfold aka The Dealer
13-07-2010, 16:14
Ticket and tax aquired :)
Thanks for every bodys help to this point.
:agree: happy days ahead
Ticket and tax aquired :)
Thanks for every bodys help to this point.
Good man, so how does it feel to be back on the road in a GTT after all this time :mart:
Just been out for a real mans drive.. i was out a mear 30 mins.. its true maidon trip...
I get some dude (white bob marley) rag his van along side and smile and say somthing... he had his thumbs up so i guess it was a good thing...
Then in the petrol station a police officer took the time to say how nice it looked... then he looked pissed off as i started it and he heard the sidey ... ohh well he passed me and didnt pull me over...
All in all i have not had that much fun since i owned a clio v6.. awsome!
Big Steve - Raider
13-07-2010, 17:27
:niceone::niceone::niceone:
wrightygtt
13-07-2010, 18:07
well done, car looks ace:agree:
well done, car looks ace:agree:
Its all down to local members and this club the fact the car is done. thanks to
Philr5t
Dave..H
James5
Fido's got a raider
Bong john
Mike... aka phase i 16v
Tony (fishead)
Colin aka the master
Big steve raider!
Any people who have sold/given me parts, i may have missed a few and i apoligise.. but big thanks:smokin:
well done mate look forward to seeing you about again in a 5 :agree:
Hmmmm i seem to have lost the engine... ohhh dear which way did it go which way did it go ?:crap:
Big Steve - Raider
27-11-2010, 09:49
Hmmmm i seem to have lost the engine... ohhh dear which way did it go which way did it go ?:crap:
:scared: I don't see it up there???
:dearme: I don't see it beside me either?
:coffee: No adverts in the paper for it??
:scratch: Yep you've definately lost it!!
:laugh:;)
Markey Mark (BD)
27-11-2010, 12:43
If you've lost it mate what you got to replace it!:p
modfather
27-11-2010, 15:31
If you've lost it mate what you got to replace it!:p
could always use this engine :laugh::laugh:
http://www.amazon.co.uk/gp/product/images/B000YX7OXO/ref=dp_image_text_0?ie=UTF8&n=468292&s=kids
ioshi_s_golf
27-11-2010, 15:36
could always use this engine :laugh::laugh:
http://www.amazon.co.uk/gp/product/images/B000YX7OXO/ref=dp_image_text_0?ie=UTF8&n=468292&s=kids
yeah this is perfect one :D
Markey Mark (BD)
27-11-2010, 16:19
could always use this engine :laugh::laugh:
http://www.amazon.co.uk/gp/product/images/B000YX7OXO/ref=dp_image_text_0?ie=UTF8&n=468292&s=kids
I've heard those perspex head and block combo's are quite good! :laugh::laugh::laugh:
http://truckracing.renault-trucks.com/en/renault-premium-race-truck/
Might just buy this and use that instead of a 5
modfather
27-11-2010, 20:07
I've heard those perspex head and block combo's are quite good! :laugh::laugh::laugh:
yeah dont get a over heating problem iva :laugh::laugh::p
modfather
27-11-2010, 20:13
http://truckracing.renault-trucks.com/en/renault-premium-race-truck/
Might just buy this and use that instead of a 5
:agree::wasntme:
TNT Tricky Nicky
27-11-2010, 20:15
http://truckracing.renault-trucks.com/en/renault-premium-race-truck/
Might just buy this and use that instead of a 5
you would literally be my hero if you rocked up at national day in one of these :laugh:
you would literally be my hero if you rocked up at national day in one of these :laugh:
I'll be your hero in a few years then lol
Update.
Been offroad since november, bad weather etc
Thought id do somthing as i was bored, so the engine is out and stripped.
Been on a spending spree for a few weeks.
T25 turbo, Piper 300 spring and vernier may change to 285, forged pistons, steel liners, manifold (tubey), l/b flywheel, pretty large front mount.
so its ll go go here.. still in 2 minds wether to change the rods with the pistons etc (makes sense in my head)
anyway a few other things being done, general clean up of bay and under the car AGAIN...
So 563 miles done and now having a change up... pic to follow :) peace
Come on Jerpa, you can't do an update without pic's:cooter::cooter:
Can't believe me, Dave, Phil and yourself snapped the gear selector rod getting the engine out:ashamed::eek::wasntme:
Come on Jerpa, you can't do an update without pic's:cooter::cooter:
Can't believe me, Dave, Phil and yourself snapped the gear selector rod getting the engine out:ashamed::eek::wasntme:
Back out again so when iam able to i'll get on with it:agree:
Come on Jerpa, you can't do an update without pic's:cooter::cooter:
Can't believe me, Dave, Phil and yourself snapped the gear selector rod getting the engine out:ashamed::eek::wasntme:
Ur hmm I was just present this time and just watched it bowing :cry:
Ur hmm I was just present this time and just watched it bowing :cry:
:laugh::laugh:
Bit of update phot and car porn :) I love ebay:agree:
JRP Looking good matey, you going for OE rod's or H rods now matey to compliment the forged pistons and steel liners??
Not sure.. the rods are very expensive, and im sure the standards fit dont they? and they are relitivly strong..?? hmmm what to do what to do:cry:
modfather
17-02-2011, 20:39
they look :cool: good old ebay :laugh:
they look :cool: good old ebay :laugh:
£430 quid all in :)
modfather
17-02-2011, 21:10
£430 quid all in :)
thats a good price :agree:
Dave Reed
17-02-2011, 21:29
£430 quid all in :)
All you need to do now is check the liners are a perfect circle ;)
All you need to do now is check the liners are a perfect circle ;)
Explain? liners dont bother me to much he did them free with the pistons.
But never the less explain
Dave Reed
17-02-2011, 21:39
Explain? liners dont bother me to much he did them free with the pistons.
But never the less explain
Haha i cant remember who told me now, but someone bought some liners and they needed extensive honing etc as they weren't perfect circles.
Just some free advice and could possibly save you alot of agro :)
If you got them free though, then your already on a winner.. Also something else to consider is what rings your going to run. Hope this helps.
Nice one ;) i saw it on ebay pistons at a decent price then in the add he put the liners in from ktec or somthing. really nice guy when he dropped them off.. just said it was sitting going to waste so selling on.
i'll check the liners out at the machine shop, i need special rings for the liners though nik somthing or other ?? any suggestions? or would the ones that come with the pistons suffice?
Dave Reed
17-02-2011, 21:52
tbh i think it was the mecca car parts ones, but could of been the gay-tech ones.. Damn my memory is getting bad lol..
That will be nickercil (spelling) .. I run total seal ones, but then they are a bit hit and miss with sealing.. I think some people just run standard rings.. All you've got to remember is 1 of the surfaces has the bed into the other, so something has to give ;)
where do i gt nicercil ones from then :)
where do i gt nicercil ones from then :)
You can get the ones you have got Nikasil coated, if they are the k-tec ones they are not coated, Total seal rings as Dave says re good with the teel liners, but from memory I think the wossner rings you have should be ok with the steel liners as that's what BBPT and K-tec used to sell with there kits
Dave Reed
17-02-2011, 22:06
where do i gt nicercil ones from then :)
I'm not sure you can get them.. Nickercil is normally a coating found on the bores.. I got my rings through the guy who does alot of engine work for me.. I'd have to have a look at my paperwork to see where i bought them from as they come from the states via a uk distributer.
Dave Reed
17-02-2011, 22:09
You can get the ones you have got Nikasil coated, if they are the k-tec ones they are not coated, Total seal rings as Dave says re good with the teel liners, but from memory I think the wossner rings you have should be ok with the steel liners as that's what BBPT and K-tec used to sell with there kits
I spoke to wossners direct and they said they would last?? But hey if people use then they must lol
I'm not sure you can get them.. Nickercil is normally a coating found on the bores.. I got my rings through the guy who does alot of engine work for me.. I'd have to have a look at my paperwork to see where i bought them from as they come from the states via a uk distributer.
Dave that would be good to know the part number for the Total Seal rings, as I have a set of Total Seals but lost the invoice and I need to replace 1 piston with ring's
Ohh these pistons could give an asprin a head ache... how much to get them coated? and for decent rings?
standard liners might be easier.. :)
I spoke to wossners direct and they said they would last?? But hey if people use then they must lol
I think Philr5t is using the wossner rings in his engine
Ohh these pistons could give an asprin a head ache... how much to get them coated? and for decent rings?
standard liners might be easier.. :)
What you need to think about is what you actually want out of the engine and what you want it to do
Dave Reed
17-02-2011, 22:13
james i'm not sure there was a past number as all you do is measure the ring depth and obviously size of piston and then they'll match it up.. I'll have a look round a some point though.
What you need to think about is what you actually want out of the engine and what you want it to do
True true.. see how much power i can run... might as well lol
or sell the liners for silly money and buy other parts
james i'm not sure there was a past number as all you do is measure the ring depth and obviously size of piston and then they'll match it up.. I'll have a look round a some point though.
Yeah I had to do that but i swear the invoice they sent me had a part number on it:scratch: this is going back a few years now though so my memory isn't what it was
Dave Reed
17-02-2011, 22:21
I think Philr5t is using the wossner rings in his engine
We'll see pretty soon then if they last ;) well maybe 2015 when its finished hahaha sorry phil ;)
Dave Reed
17-02-2011, 22:24
True true.. see how much power i can run... might as well lol
or sell the liners for silly money and buy other parts
Tbh my car was running 24ish psi + 60 to 70 horses of gas and the standard liners held up pretty damn well.. Didn't like the 100 shot though :( haha
Tbh my car was running 24ish psi + 60 to 70 horses of gas and the standard liners held up pretty damn well.. Didn't like the 100 shot though :( haha
Way i see it, i have them would be a shame not to utilise what i have.. dunno what id get for them:confused:
Get some of this for the build aswell matey
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=140508834132&fromMakeTrack=true&ssPageName=VIP:watchlink:top:en
Dave Reed
17-02-2011, 22:32
Way i see it, i have them would be a shame not to utilise what i have.. dunno what id get for them:confused:
Exactly mate.. Just use them! I'm only trying to help out not scare you.. Its better to no the cost's/maintenance prior to fitting parts that you think will save rebuilds etc only to find out your having to replace stuff every 4k miles..
Well nw i no you got them free, i'll have them for free please haha joking.
Dave Reed
17-02-2011, 22:36
Get some of this for the build aswell matey
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=140508834132&fromMakeTrack=true&ssPageName=VIP:watchlink:top:en
Good stuff that.
:agree:
Get some of this for the build aswell matey
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=140508834132&fromMakeTrack=true&ssPageName=VIP:watchlink:top:en
Bought
tbh i think it was the mecca car parts ones, but could of been the gay-tech ones.. Damn my memory is getting bad lol..
That will be nickercil (spelling) .. I run total seal ones, but then they are a bit hit and miss with sealing.. I think some people just run standard rings.. All you've got to remember is 1 of the surfaces has the bed into the other, so something has to give ;)
Wasn't is Stu clark that had the Mecca part ones and said that they needed alot of honing before he was happy with the piston to bore clearance
UPDATE Time.
Been quietly busy.
Now got pistons, liners.
Took delivery of nice con rods today as per pic :)
New front mount.
Gear box licked up :)
All gaskets are in :)
all everything... even a new blower.. not long ;)
Je suis busy at the mo.
Engine is due back next week/parts new spec is as follows.
Forged pistons and rods (rods balanced)
New std liners
Lightend and balanced fly wheel
re ground and balanced crank
Cylinder head fully gasflowed/port/polish.. refured rocker assembly everything head related is almost like new... weeks of work done :agree: (pics to follow)
T25 full turbo
suitible sized front mount
added guage from scoff Zeitronix kit.. thanks chap :)
prob more but i forget alot of stuff having just bought a house.
a few pics as well ive gone wheel buying mad as of late!!
willys and cups!
Enjoy a few pics (engine and head pics to follow next week)
What happened to the old engine matey, did it let go??
Didnt let go, but ended the year with a little smoke. so thought over the winter period id off road it and rebuild.
somthing to do :)
Fair do's :) New engine should be nice and reliable with them bits in like :agree:
Didnt let go, but ended the year with a little smoke. so thought over the winter period id off road it and rebuild.
somthing to do :)
i would have onroaded it and killed it first!!! :cooter::D
Rear arches are prepped and one side now painted, POR-15 for the winity win!
Just protecting all parts i can :)
Pics :)
Big Steve - Raider
10-06-2011, 22:12
Rear arches are prepped and one side now painted, POR-15 for the winity win!
Just protecting all parts i can :)
Pics :)
That's the game Jerpa Jerpa!! :niceone:
2011's a Big Year for Minty Renault 5's ;)
So 2011 is drawing to an end and the 5 has not moved.
BUT
The new garage/workshop is being sorted and further extended in the new year so this 5 will be over and build again.
Cant wait to get the new garage sorted PARTY at JRP's when its complete.
Ohh the car on the other hand is not speaking to me after being stood still for a year +
A couple of little update pics Had Andy M round helping today. Build has made progress.
The target of the fete and nationals (twin) dependant look good :) More to follow soon (updates)
So Nice new forged rods and pistons in situ :)
Might have sex with my hand if i keep thinking about my 5... I have re found the interest ive been lacking for 2 years :)
:hump::hump:
Penfold aka The Dealer
31-03-2012, 20:40
A couple of little update pics Had Andy M round helping today. Build has made progress.
The target of the fete and nationals (twin) dependant look good :) More to follow soon (updates)
So Nice new forged rods and pistons in situ :)
:agree: chop chop JRP, be good to see u in a 5 this year
Advice pleeeease just looking at the pictures, if you look at the liners are 1 and 4 to far away from 2 and 3 i thought the sat up closer than they are.
Any advice welcome.:agree:
Advice pleeeease just looking at the pictures, if you look at the liners are 1 and 4 to far away from 2 and 3 i thought the sat up closer than they are.
Any advice welcome.:agree:
Why you no listen I did tell say to you last week the liners ain't sitting right me old china
Tony Walker
06-04-2012, 22:21
looks like the washers arent clamping evenly?
Thanks to everybody that helped with this build.
Special thanks to
Dave..H aka shaggy
James5
Philr5t
A list of other names springs to mind as well but can't list you all.
It's off to a new home tonight, the owners a hero so it will be in safe hands.
I have a small block chevy v8 on the way to build, then going to find a suitable car or truck to drop it in.
Renault 21? I dunno see what happens.
Thanks all ill start a new project soon.
John tell me you haven't sold it
Glad the GTT has gone to another good home Jon. The car is a credit to you and everyone else involved in the rebuilding of it.
Keep us updated with your projects :) :agree:
Cheers trev, the guy that's got it put some severe time into it when I was layed up etc. I'm glad he has it.
I'm still going to be here just gonna squeeze this lump into a renault somehow ;)
Jon, I can't thank you enough for the car it's fantastic and I promise I will look after it and finish of the little bit's outstanding on the car (which isn't much at all) hopefully it will be back on the road over the next couple of weeks:agree:
Again many thanks.:cooter:
Ordered and got a fair few bits to go on the car already :D
Started changes already sorry Jerps nothing to chav still keeping an OE + look
I am basically swapping all my goodies over from the Tungy onto the white one and a few extra bit's I have picked up,
So I am fitting,
Morrette's,
Clear front and side repeaters,
Side decals,
Koni Yellow Suspension,
15" OZ F1's,
My engine with High lift cam etc...
nice downpipe james;);)
It is pretty sexy got to thank AndyBond for sorting this out for me:agree: Please peeps don't shoot me down being a renault 5 lover I am on all forums 5 related and I took advantage of the www.turborenault.co.uk (http://www.turborenault.co.uk) group buy who wouldn't great bit of kit.
It is pretty sexy got to thank AndyBond for sorting this out for me:agree: Please peeps don't shoot me down being a renault 5 lover I am on all forums 5 related and I took advantage of the www.turborenault.co.uk (http://www.turborenault.co.uk) group buy who wouldn't great bit of kit.
nothing wrong with this james at all, we might have a French road trip yet next year in conjuncture with them but ive still got to sort this
Getting Sprayed up thursday:D
do like them matey are we on still??
read ya whatsapp or pm's ya bum:laugh::laugh:
Nad-5GTT
09-07-2014, 13:46
It is pretty sexy got to thank AndyBond for sorting this out for me:agree: Please peeps don't shoot me down being a renault 5 lover I am on all forums 5 related and I took advantage of the www.turborenault.co.uk (http://www.turborenault.co.uk) group buy who wouldn't great bit of kit.
I think most of us are members off the other site ;) is this now for sale james or was you the guinea pig :D is it as good as it looks as well :smokin:
Happy for you James, the wheels look trick too.
Chevy v8 lump orderino'd
I think most of us are members off the other site ;) is this now for sale james or was you the guinea pig :D is it as good as it looks as well :smokin:
I am the guinea pig it's awaiting me dropping the engine in to make sure all clearances are ok:agree:
Nad-5GTT
09-07-2014, 18:02
I am the guinea pig it's awaiting me dropping the engine in to make sure all clearances are ok:agree:
Chop chop :cooter:
Chop chop :cooter:
It's kinda fitted :ashamed: Oly because I lost the downpipe bolts so used cable ties for some example pic's :laugh:
I managed to drop the engine in last night by myself without scratching a thing, was well impressed:D:coffee:.
I will start a new thread on the car
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.